School of Civil, Environmental and Architectural Engineering

  • Korea, Republic of

Research Output

Filter
Paper
2020

Effects of fine matters on strength and stiffness

Hoang, Q. N., Kim, S. Y., Song, J. U. & Lee, J. S., 2020.

Research output: Contribution to conferencePaper

Expansion characteristics of lightweight foamed grout with foaming agent contents

Byun, Y. H., Han, W. J. & Lee, J. S., 2020.

Research output: Contribution to conferencePaper

Prediction of surface settlement during shield TBM excavation using extreme learning machine

Kim, D., Lee, H., Pham, K., Oh, J. Y. & Choi, H., 2020.

Research output: Contribution to conferencePaper

Rheological properties of fine-grained soils according to temperature and water content

Park, G. W., Kang, S., Lee, D. & Lee, J. S., 2020.

Research output: Contribution to conferencePaper

Tip resistance characterization of embedded piles with inclined tip plates using dynamic pile tests

Seo, M., Han, K., Park, J. B. & Lee, J. S., 2020.

Research output: Contribution to conferencePaper

2019

3D modeling approach of building construction based on point cloud data using LiDAR

Oh, B., Kim, M., Lee, C., Cho, H. H. & Kang, K. I., 2019 Jan 1, p. 906-912. 7 p.

Research output: Contribution to conferencePaper

New system form design process using QFD and TRIZ

Lee, C., Lee, D., Cho, H. H. & Kang, K. I., 2019 Jan 1, p. 913-920. 8 p.

Research output: Contribution to conferencePaper

2018

Application of machine learning technology for construction site

Ahn, H., Lee, D., Lee, S., Kim, T., Cho, H. H. & Kang, K. I., 2018 Jan 1.

Research output: Contribution to conferencePaper

PIECE 3D: Portable interactive education for construction engineering in 3D

Kang, S., Cho, H. H., Kang, K. I., Kang, M. & Hass, C. T., 2018 Jan 1.

Research output: Contribution to conferencePaper

Research trend analysis for construction automation

Pyo, K., Lee, D., Lee, D., Lim, H., Cho, H. H. & Kang, K. I., 2018 Jan 1.

Research output: Contribution to conferencePaper

2017

Development of controlled low strength material (CLSM) using self-cementitious flyash

Lim, S., Choo, H., Lee, W. & Lee, C., 2017 Jan 1, p. 2579-2582. 4 p.

Research output: Contribution to conferencePaper

Investigation of ground cavity using ground penetrating radar

Hong, W. T., Kang, S., Han, W. J. & Lee, J-S., 2017 Jan 1, p. 935-938. 4 p.

Research output: Contribution to conferencePaper

1 Citation (Scopus)
2013

Productivity analysis of the table formwork method for making a cost-efficient equipment input plan

Kwon, J. B., Lim, H. S., Kim, T. H., Cha, M. S., Cho, H. H. & Kang, K. I., 2013, p. 608-617. 10 p.

Research output: Contribution to conferencePaper

Open Access
2 Citations (Scopus)

Sizing optimization of sandwich panels having prismatic core using water cycle algorithm

Sadollah, A., Kim, J. H., Eskandar, H. & Yoo, D. G., 2013, p. 325-328. 4 p.

Research output: Contribution to conferencePaper

6 Citations (Scopus)
2012

Parametric modelling based approach for efficient quantity takeoff of NATM-Tunnels

Cho, D., Cho, N. S., Cho, H. & Kang, K. I., 2012.

Research output: Contribution to conferencePaper

2011

Analysis for nonlinear finite strain consolidation of soft clay equipped with vertical drains

Choi, H., Ahn, Y., Kwak, T. & Lim, J., 2011.

Research output: Contribution to conferencePaper

Behavior of hybrid system of soil-nailing and compression anchor

Seo, H. J., Kim, H. R., Jeong, N. S., Shin, Y. J. & Lee, I. M., 2011.

Research output: Contribution to conferencePaper

2 Citations (Scopus)

Comparison of four composite landfill liner systems considering leakage rate and mass flux

Nguyen, T. B., Stark, T. D. & Choi, H., 2011.

Research output: Contribution to conferencePaper

6 Citations (Scopus)

Elastic moduli and porosity profiles in soft soils by using elastic and electromagnetic waves

Lee, J. S., Yoon, H. K., Kim, Y. H. & Cho, S. H., 2011.

Research output: Contribution to conferencePaper

Estimation of K 0 in sand using DMT results

Lee, M. J., Choi, S. K., Kim, M. & Lee, W., 2011.

Research output: Contribution to conferencePaper

Form work management based on ubiquitous computing for high-rise building construction

Kim, T., Cho, H. & Kang, K. I., 2011, p. 1334-1335. 2 p.

Research output: Contribution to conferencePaper

Layering characteristic of salt-cemented granular media

Truong, Q. H., Byun, Y. H., Eom, Y. H., Tran, M. K. & Lee, J. S., 2011.

Research output: Contribution to conferencePaper

2008

A simplified formulation for the aerodynamic instabilityt of bridge decks

Cho, Y., Cho, J. Y. & Lee, H. E., 2008.

Research output: Contribution to conferencePaper

Shear design of corrugated steel webs

Yi, J., Moon, J., Choi, B. H. & Lee, H. E., 2008.

Research output: Contribution to conferencePaper

The geumga grand bridge design using the creative problem solving technique

Oh, M. S., Jeon, B. G., Chung, H. Y. & Lee, H. E., 2008.

Research output: Contribution to conferencePaper

2006

Decomposition of applied eccentric load for thin-walled multicell box girder analysis

Kim, S., Park, N. H. & Kang, Y. J., 2006, p. 1019-1026. 8 p.

Research output: Contribution to conferencePaper

Large displacement behavior of horizontally curved beams

Han, K. H., Yoon, K. Y. & Kang, Y. J., 2006, p. 299-306. 8 p.

Research output: Contribution to conferencePaper

Lateral buckling formula of stepped beams with continuous bracing

Park, J. S., Stallings, J. M. & Kang, Y. J., 2006, p. 315-322. 8 p.

Research output: Contribution to conferencePaper

2005

Computational and experimental investigation of wind load on bridge with split decks on single pylon

Lee, S., Park, C. W., Kim, C. H., Kim, Y. M., Lee, H. E., Cho, Y. R. & Cho, J. Y., 2005.

Research output: Contribution to conferencePaper

2004

A disposable BOD microsensor using a polymer substrate

Anjum, M., Shekhar, H., Hyun, S. H., Hong, S. & Cho, H. J., 2004, p. 1202-1205. 4 p.

Research output: Contribution to conferencePaper

5 Citations (Scopus)
2002

Developing an AB-initio human-machine interface for an ultrahigh temperature mems sensor made from a novel polymer derived ceramic

Kong, J., Maute, K., Frangopol, D., Liew, L. A., Saravanan, R. A., Bright, V. M. & Raj, R., 2002.

Research output: Contribution to conferencePaper

1999

3-D numerical analysis for the prediction of discontinuity zone ahead of tunnel face

Lee, I. M. & Kim, D. H., 1999 Jan 1, p. 199-201. 3 p.

Research output: Contribution to conferencePaper

1998

Effects of cross beams on free vibration of horizontally curved I-girder bridges

Yoon, K. Y. & Kang, Y. J., 1998, p. 165-174. 10 p.

Research output: Contribution to conferencePaper

3 Citations (Scopus)