School of Mechanical Engineering

  • Korea, Republic of

Research Output 1994 2020

2020

Clean and less defective transfer of monolayer graphene by floatation in hot water

Kim, J. W., Woo, J. Y., Jo, S., Oh, J. H., Hong, W., Lee, B. C., Jung, H. J., Kim, J. H., Roh, S. C. & Han, C. S., 2020 Apr 1, In : Applied Surface Science. 508, 145057.

Research output: Contribution to journalArticle

Graphite
Graphene
Monolayers
graphene
Water

Combustion-driven synthesis route for tunable TiO2/RuO2 hybrid composites as high-performance electrode materials for supercapacitors

Park, S., Shin, D., Yeo, T., Seo, B., Hwang, H., Lee, J. & Choi, W., 2020 Mar 15, In : Chemical Engineering Journal. 384, 123269.

Research output: Contribution to journalArticle

Combustion synthesis
electrode
Capacitance
combustion
Metals

Design optimization of bare tube heat exchanger for the application to mobile air conditioning systems

Lim, H., Han, U. & Lee, H., 2020 Jan 25, In : Applied Thermal Engineering. 165, 114609.

Research output: Contribution to journalArticle

Tubes (components)
Air conditioning
Heat exchangers
Heat transfer
Pressure drop

Direct Measurement of Ion Diffusivity in Oxide Thin Film by Using Isotope Tracers and Secondary Ion Mass Spectrometry

Bae, K., Jang, D. Y., Park, J. S., Son, J. W., Prinz, F. B. & Shim, J. H., 2020 Mar 1, In : International Journal of Precision Engineering and Manufacturing - Green Technology. 7, 2, p. 405-410 6 p.

Research output: Contribution to journalArticle

Radioactive tracers
Secondary ion mass spectrometry
Isotopes
Yttria stabilized zirconia
Oxide films
Thermal comfort
Fans
Energy efficiency
Compressors
Pumps

Efficient heat spreader using supersonically sprayed graphene and silver nanowire

Kim, T. G., Park, C. W., Woo, D. Y., Choi, J. & Yoon, S. S., 2020 Jan 25, In : Applied Thermal Engineering. 165, 114572.

Research output: Contribution to journalArticle

Spreaders
Graphene
Nanowires
Silver
Oxide films

Estimation of flow stress and grain size uniformity of nickel alloy steel for the heavy plate rolling process

Lim, H. S., Shin, J. H. & Kang, Y. T., 2020 Mar 5, In : Journal of Alloys and Compounds. 816, 152638.

Research output: Contribution to journalArticle

Nickel alloys
Alloy steel
Plastic flow
Neural networks
Hot rolling

Evaluation of regulated, particulate, and BTEX emissions inventories from a gasoline direct injection passenger car with various ethanol blended fuels under urban and rural driving cycles in Korea

Myung, C. L., Choi, K., Cho, J., Kim, K., Baek, S., Lim, Y. & Park, S., 2020 Feb 15, In : Fuel. 262, 116406.

Research output: Contribution to journalArticle

Ethanol fuels
Direct injection
Passenger cars
Gasoline
Ethanol
1 Citation (Scopus)

Fracture assessments with elastic follow-up for combined primary and secondary loadings: Part 2: Numerical validation

Lee, H. J., Kim, Y. J., Ainsworth, R. A. & Oh, C. Y., 2020 Feb 1, In : Engineering Fracture Mechanics. 224, 106796.

Research output: Contribution to journalArticle

Cracks
Materials properties
Pipe
Hot Temperature

In vitro evaluation of Pt-coated electrospun nanofibers for endovascular coil embolization

Kim, M. W., An, S., Seok, H., Jung, H., Park, D. H., Yarin, A. L. & Yoon, S. S., 2020 Jan 1, In : Acta Biomaterialia. 101, p. 285-292 8 p.

Research output: Contribution to journalArticle

Open Access
Nanofibers
Platinum
Costs and Cost Analysis
Blood
Catheters

Reinforcement learning based on movement primitives for contact tasks

Kim, Y. L., Ahn, K. H. & Song, J. B., 2020 Apr, In : Robotics and Computer-Integrated Manufacturing. 62, 101863.

Research output: Contribution to journalArticle

Reinforcement learning
Reinforcement Learning
Trajectories
Contact
Neural Networks

Scale-Adaptive Simulation of the Unsteady Turbulent Flow in a High-Speed Centrifugal Compressor with a Wedge-Type Vaned Diffuser

Zamiri, A., Choi, M. & Chung, J. T., 2020 Jan 1, In : Flow, Turbulence and Combustion. 104, 1, p. 45-69 25 p.

Research output: Contribution to journalArticle

centrifugal compressors
Centrifugal compressors
diffusers
turbulent flow
wedges

Study on the Design of a New Heatsink Cooling System for Thermoelectric Dehumidifier

Im, D. H., Kwon, H. C., Kim, K. J. & Kim, K. H., 2020 Jan 1, In : International Journal of Precision Engineering and Manufacturing. 21, 1, p. 75-80 6 p.

Research output: Contribution to journalArticle

Cooling systems
Air
Electric potential
Heat losses
Fans

Supersonic Cold Spraying for Energy and Environmental Applications: One-Step Scalable Coating Technology for Advanced Micro- and Nanotextured Materials

An, S., Joshi, B., Yarin, A. L., Swihart, M. T. & Yoon, S. S., 2020 Jan 1, In : Advanced Materials. 32, 2, 1905028.

Research output: Contribution to journalReview article

Spraying
Coatings
Polymers
Adhesion
Touch screens
2019
7 Citations (Scopus)

4D printing reconfigurable, deployable and mechanically tunable metamaterials

Yang, C., Boorugu, M., Dopp, A., Ren, J., Martin, R., Han, D., Choi, W. & Lee, H., 2019 Jul 1, In : Materials Horizons. 6, 6, p. 1244-1250 7 p.

Research output: Contribution to journalArticle

Metamaterials
Printing
Shape memory effect
Polymers
Stiffness
liquefied petroleum gas
Liquefied petroleum gas
Direct injection
Passenger cars
automobile
2 Citations (Scopus)

A digital approach to dynamic jaw tracking using a target tracking system and a structured-light three-dimensional scanner

Kwon, J. H., Im, S., Chang, M., Kim, J. E. & Shim, J. S., 2019 Jan 1, In : Journal of Prosthodontic Research. 63, 1, p. 115-119 5 p.

Research output: Contribution to journalArticle

Cone-Beam Computed Tomography
Jaw
Mandible
Temporomandibular Joint
Light

Aerodynamic Analyses on the Steady and Unsteady Loading-Noise Sources of Drone Propellers

Kim, D. H., Park, C. H. & Moon, Y. J., 2019 Sep 1, In : International Journal of Aeronautical and Space Sciences. 20, 3, p. 611-619 9 p.

Research output: Contribution to journalArticle

Propellers
Aerodynamics
Mach number
NASA
Mathematical models

A facile and fast transfer of ultrathin graphene oxide film on various substrates

Jeon, E. S., Oh, J. H., Seo, S., Lee, S. E., Jo, S. & Han, C. S., 2019 Aug 22, In : Journal of Physics D: Applied Physics. 52, 45, 455301.

Research output: Contribution to journalArticle

Graphite
Graphene
Oxide films
oxide films
graphene

A heuristic for task allocation and routing of heterogeneous robots while minimizing maximum travel cost

Bae, J., Lee, J. & Chung, W., 2019 May, 2019 International Conference on Robotics and Automation, ICRA 2019. Institute of Electrical and Electronics Engineers Inc., p. 4531-4537 7 p. 8794257. (Proceedings - IEEE International Conference on Robotics and Automation; vol. 2019-May).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Robots
Traveling salesman problem
Costs
Motion planning

An assistive control strategy using arm swing information for 1DoF hip exoskeleton for hemiplegic gait rehabilitation

Seo, W., Kwon, J. H., Ko, Y. & Hong, D., 2019 Apr 1, In : Journal of the Korean Society for Precision Engineering. 36, 4, p. 419-424 6 p.

Research output: Contribution to journalArticle

Patient rehabilitation
Exoskeleton (Robotics)

A new outer-rotor hybrid-excited flux-switching machine employing the HTS homopolar topology

Kim, J. M., Jang, J. Y., Chung, J. & Hwang, Y. J., 2019 Jan 1, In : Energies. 12, 14, 2654.

Research output: Contribution to journalArticle

Open Access
Rotor
Rotors
Permanent Magnet
Topology
Fluxes
1 Citation (Scopus)

A novel reactive-type joint torque sensor with high torsional stiffness for robot applications

Min, J. K., Ahn, K. H., Park, H. C. & Song, J-B., 2019 Nov 1, In : Mechatronics. 63, 102265.

Research output: Contribution to journalArticle

Robot applications
Torque
Stiffness
Sensors
Robots

A numerical model to simulate ductile tearing-creep crack growth interaction

Oh, Y. R., Kim, S. J., Kim, Y-J., Ainsworth, R. A. & Nikbin, K., 2019 Aug 1, In : International Journal of Pressure Vessels and Piping. 175, 103920.

Research output: Contribution to journalArticle

Numerical models
Crack propagation
Creep
Stainless Steel
Plasticity
1 Citation (Scopus)

A pilot study of endoscopic submucosal dissection using an endoscopic assistive robot in a porcine stomach model

Kim, B. G., Choi, H. S., Park, S. H., Hong, J. H., Lee, J. M., Kim, S. H., Chun, H-J., Hong, D. & Keum, B., 2019 Jan 1, In : Gut and Liver. 13, 4, p. 402-408 7 p.

Research output: Contribution to journalArticle

Stomach
Swine
Robotics
Safety
Incidence

A study on optimal cutting condition of EPS foam cutting based on collimated CO2 laser beam

Kim, H., Sim, J., Jeong, S. & Hong, D., 2019 Jan 1, In : Journal of the Korean Society for Precision Engineering. 36, 9, p. 859-865 7 p.

Research output: Contribution to journalArticle

Laser beams
Foams
Lasers
Rapid prototyping
Lenses
3 Citations (Scopus)

Atomic Layer Deposition for Surface Engineering of Solid Oxide Fuel Cell Electrodes

Shim, J. H., Han, G. D., Choi, H. J., Kim, Y., Xu, S., An, J., Kim, Y. B., Graf, T., Schladt, T. D., Gür, T. M. & Prinz, F. B., 2019 Jul 1, In : International Journal of Precision Engineering and Manufacturing - Green Technology. 6, 3, p. 629-646 18 p.

Research output: Contribution to journalReview article

Atomic layer deposition
Solid oxide fuel cells (SOFC)
Fuel cells
Electrodes
Engineers

Automatic Identification of Excavator Activities Using Joystick Signals

Bae, J., Kim, K. & Hong, D., 2019 Dec 1, In : International Journal of Precision Engineering and Manufacturing. 20, 12, p. 2101-2107 7 p.

Research output: Contribution to journalArticle

Excavators
Construction equipment
Earth (planet)
Trenching
Resource allocation
1 Citation (Scopus)

Blood–Brain Barrier Dysfunction in a 3D In Vitro Model of Alzheimer's Disease

Shin, Y., Choi, S. H., Kim, E., Bylykbashi, E., Kim, J. A., Chung, S., Kim, D. Y., Kamm, R. D. & Tanzi, R. E., 2019 Jan 1, In : Advanced Science. 1900962.

Research output: Contribution to journalArticle

Open Access
blood-brain barrier
Alzheimer Disease
Brain
Claudin-5
Claudin-1

Bubble behaviors and CO2 absorption characteristics in nanoabsorbents

Li, L. & Kang, Y. T., 2019 Oct 1, In : Journal of CO2 Utilization. 33, p. 488-499 12 p.

Research output: Contribution to journalArticle

Coalescence
bubble
Methanol
coalescence
Nanoparticles

Capsule-based self-healing approaches for corrosion protection

Yarin, A., Lee, M. W., An, S. & Yoon, S. G., 2019 Jan 1, Advanced Structured Materials. Springer Verlag, p. 231-244 14 p. (Advanced Structured Materials; vol. 105).

Research output: Chapter in Book/Report/Conference proceedingChapter

Corrosion protection
Stress corrosion cracking
Capsules
1 Citation (Scopus)
Cartilage
Gait analysis
Finite element method
Pressure distribution
Muscle

Characterization of self-healing phenomena on micro- and nanoscale level

Yarin, A., Lee, M. W., An, S. & Yoon, S. G., 2019 Jan 1, Advanced Structured Materials. Springer Verlag, p. 121-134 14 p. (Advanced Structured Materials; vol. 105).

Research output: Chapter in Book/Report/Conference proceedingChapter

Nanofibers
1 Citation (Scopus)

Clonorchis sinensis excretory-secretory products increase malignant characteristics of cholangiocarcinoma cells in three-dimensional co-culture with biliary ductal plates

Wonid, J., Cho, Y., Lee, D., Jeon, B. Y., Ju, J. W., Chung, S. & Pak, J. H., 2019 May 1, In : PLoS Pathogens. 15, 5, e1007818.

Research output: Contribution to journalArticle

Open Access
Clonorchis sinensis
Cholangiocarcinoma
Coculture Techniques
Cadherins
Fasciola hepatica
absorbents
regeneration
mass transfer
Mass transfer
heat transfer

Comparison of allowable bending moments for circumferentially flawed pipes in ASME boiler and pressure vessel code section XI nonmandatory appendices C and H

Kim, H. T., Kim, J. S., Seo, J. M., Kim, Y. J., Lee, K. H. & Huh, N. S., 2019 Jan 1, Codes and Standards. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pressure vessel codes
Bending moments
Boilers
Pipe
Nuclear power plants

Comparison of PSD analysis methods in frequency domain fatigue analysis

Jang, J., Cho, J. M., Lee, K. H., Lee, W. W. & Choi, W. C., 2019 Jan 1, In : Journal of the Korean Society for Precision Engineering. 36, 8, p. 737-743 7 p.

Research output: Contribution to journalArticle

Fatigue of materials
Aircraft
Propellers
Acoustic noise
Rotors
Acoustic waves
Electric propulsion

Concluding remarks and future perspectives

Yarin, A., Lee, M. W., An, S. & Yoon, S. G., 2019 Jan 1, Advanced Structured Materials. Springer Verlag, p. 253-255 3 p. (Advanced Structured Materials; vol. 105).

Research output: Chapter in Book/Report/Conference proceedingChapter

Nanofibers
Capsules
Curing
Resins
Delamination

Control of Volume-Responsive Properties of Hydrogels through Molybdenum Disulfide Nanosheet Incorporation

Kim, H. S., An, J. & Lee, B. Y., 2019 Jan 1, In : Advanced Materials Technologies. 1900021.

Research output: Contribution to journalArticle

Hydrogels
Nanosheets
Hydrogel
Molybdenum
Phenols

Crack growth rate testing and large plate demonstration under chloride-induced stress corrosion cracking conditions in stainless steel canisters for storage of spent nuclear fuel

Lam, P. S., Duncan, A. J., Ward, L. N., Sindelar, R. L., Kim, Y. J., Jeong, J. Y., Lee, H. J. & Lee, M. W., 2019 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Salt deposits
Spent fuels
Nuclear fuels
Stress corrosion cracking
Bolts

Deburring of offset hole intersection with abrasive flow machining

Kim, K. J., Kim, Y. G. & Kim, K. H., 2019 Jan 1, In : Transactions of the Korean Society of Mechanical Engineers, A. 43, 7, p. 507-511 5 p.

Research output: Contribution to journalArticle

Deburring
Abrasives
Machining
Value engineering
Milling (machining)

Developing scratch-resistant clear coating for automotive by using molecular necklace cross-linker

Moon, S. W., Lee, J., Seo, J., Seo, J. H. & Choi, B. H., 2019 Jan 1.

Research output: Contribution to conferencePaper

Paint
Automobiles
Coatings
1 Citation (Scopus)

Development and design optimization of novel polymer heat exchanger using the multi-objective genetic algorithm

Han, U., Kang, H., Lim, H., Han, J. & Lee, H., 2019 Dec 1, In : International Journal of Heat and Mass Transfer. 144, 118589.

Research output: Contribution to journalArticle

design optimization
heat exchangers
genetic algorithms
Heat exchangers
Polymers
1 Citation (Scopus)

Development of an apparatus for chloride induced stress corrosion cracking test using immersion method with constant displacement condition

Jeong, J. Y., Lee, M. W., Kim, Y. J., Sindelar, R. & Duncan, A., 2019 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Stress corrosion cracking
Bolt tightening
Experiments
Spent fuels
Nuclear fuels
Stress corrosion cracking
Austenitic stainless steel
Fuel storage
Spent fuels
Nuclear fuels

Development of PS synchronize wale for construction of earth retaining temporary structure

Kim, K., Jeong, M. & Hong, D., 2019 Jan 1, In : Journal of the Korean Society for Precision Engineering. 36, 10, p. 947-952 6 p.

Research output: Contribution to journalArticle

Earth (planet)
Excavation
Wire rope
Struts
Bending moments
surface cracks
Surface Crack
Crack Growth
Polyethylene
High density polyethylenes
4 Citations (Scopus)

Double amplified colorimetric detection of DNA using gold nanoparticles, enzymes and a catalytic hairpin assembly

Park, C., Park, H., Lee, H. J., Lee, H. S., Park, K. H., Choi, C. H. & Na, S. S., 2019 Jan 1, In : Microchimica Acta. 186, 1, 34.

Research output: Contribution to journalArticle

Gold
Nanoparticles
DNA
Enzymes
Amplification