School of Mechanical Engineering

  • Korea, Republic of

Research Output

Filter
Conference article
2019
Open Access

Independent assessment of the major nuclear transient without excessive conservatism

Lee, I. S., Cho, M. K., Baek, K. L. & Kim, Y. C., 2019 Jan 1, In : Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering. 162.

Research output: Contribution to journalConference article

Open Access

Thermal management of lithium-ion battery using heat pipes

Yoon, J. W., Jang, D. S., Yun, S., Shin, H. H. & Kim, Y., 2019 Jan 1, In : Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering. 173.

Research output: Contribution to journalConference article

2018
Open Access
Open Access

CO2 absorption/regeneration performance enhancement by nanoabsorbents

Kang, Y. T. & Kim, S., 2018 Jan 1, In : International Heat Transfer Conference. 2018-August, p. 385-391 7 p.

Research output: Contribution to journalConference article

Condensation heat transfer and pressure drop characteristics of low GWP refrigerants in plate heat exchanger

Kwon, O. J., Jung, J. H. & Kang, Y. T., 2018 Jan 1, In : International Heat Transfer Conference. 2018-August, p. 5019-5024 6 p.

Research output: Contribution to journalConference article

Experimental study on diffusion absorption refrigeration cycle using low GWP refrigerants

Jung, H. S., Kim, G. & Kang, Y. T., 2018 Jan 1, In : Refrigeration Science and Technology. Part F147651, p. 48-55 8 p.

Research output: Contribution to journalConference article

Nano-biomimetic cutaneous sensor

Han, C. S., Na, S. & Chun, K. Y., 2018, In : World Congress on Recent Advances in Nanotechnology. 144.

Research output: Contribution to journalConference article

Open Access
Open Access

Numerical Simulation of Thermal Ageing Effect on Fracture Behavior for CF8A Cast Stainless Steels under Very Low Cyclic Loading Conditions

Youn, G. G., Nam, H. S., Kim, Y-J. & Kim, J. W., 2018 Jan 1, In : Procedia Structural Integrity. 13, p. 1297-1304 8 p.

Research output: Contribution to journalConference article

Open Access

Numerical Study on the Performance of Vapor Compression Liquid Chillers using R32 and R410A.

Lee, J. H., Kang, H., Jung, J., Lim, J., Cho, W. & Kim, Y. C., 2018 Jan 1, In : Refrigeration Science and Technology. Part F147651, p. 144-151 8 p.

Research output: Contribution to journalConference article

Performance characteristics of pulsating heat pipe with various non-uniform heating conditions

Cho, W., Jang, D. S., Lim, J., Song, K. & Kim, Y. C., 2018 Jan 1, In : International Heat Transfer Conference. 2018-August, p. 4789-4794 6 p.

Research output: Contribution to journalConference article

2014

Experimental investigation of desiccant wheel assisted MAC system

Lin, X., Lee, H., Hwang, Y., Radermacher, R., Kwon, J. & Kwon, C., 2014, In : SAE Technical Papers. 1

Research output: Contribution to journalConference article

1 Citation (Scopus)
2013

A numerical investigation of mixing characteristics of a direct-injection (DI) engine with liquefied petroleum gas

Lee, J. S., Seo, J., Kim, H. Y. & Park, S., 2013, In : SAE Technical Papers. 1

Research output: Contribution to journalConference article

1 Citation (Scopus)

Fuel effect on particle emissions of a direct injection engine

Kim, Y., Kim, Y., Kang, J., Jun, S., Rew, S., Lee, D. & Park, S., 2013, In : SAE Technical Papers. 2

Research output: Contribution to journalConference article

9 Citations (Scopus)

Strategies for particle emissions reduction from GDI engines

Kim, Y., Kim, Y., Jun, S., Lee, K. H., Rew, S., Lee, D. & Park, S., 2013, In : SAE Technical Papers. 2

Research output: Contribution to journalConference article

10 Citations (Scopus)
2010

High-efficiency exciton dissociation at poly(3-hexylthiophene)/single-walled carbon nanotube interfaces in planar nano-heterojunction photovoltaics

Ham, M. H., Paulus, G. L. C., Lee, C. Y., Song, C., Kalantar-Zadeh, K., Choi, W., Han, J. H. & Strano, M. S., 2010, In : ACS National Meeting Book of Abstracts.

Research output: Contribution to journalConference article

2008
5 Citations (Scopus)

Exact locating of sub-surface microelectronic structures using scanning thermal wave microscopy

Chung, J., Kim, K., Hwang, G., Kwon, O., Lee, J. S., Park, S. & Choi, Y. K., 2008, In : Proceedings of SPIE - The International Society for Optical Engineering. 7268, 72681V.

Research output: Contribution to journalConference article

2007

Direct fabrication and patterning of transparent conductive carbon nanotube film using inkjet printing

Song, J. W., Yoon, Y. H., Kim, J., Han, C. S., Choi, B. S. & Kim, J. H., 2007, In : Digest of Technical Papers - SID International Symposium. 38, 1, p. 1613-1616 4 p.

Research output: Contribution to journalConference article

2 Citations (Scopus)

Fatigue properties of surface-micromachined Al-3%Ti thin films

Park, J. H., Myung, M. S. & Kim, Y. J., 2007, In : Key Engineering Materials. 353-358, PART 1, p. 299-302 4 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Fatigue strength evaluation of load-carrying fillet weldments under out-of-plane bending load using structural stress method

Kim, M. H., Kang, S. W., Ha, C. I., Lee, J. M., Kim, J. H. & Na, S. S., 2007, In : Key Engineering Materials. 353-358, PART 3, p. 2069-2072 4 p.

Research output: Contribution to journalConference article

2006

Performance characteristics of a polymer electrolyte fuel cell with the anodic supply mode

Lee, Y., Jang, Y. H., Jung, T., Chung, J. T. & Kim, Y., 2006, In : ECS Transactions. 3, 1, p. 871-878 8 p.

Research output: Contribution to journalConference article

7 Citations (Scopus)

Proton transport membranes for fuel cells: Polymeric versus dense ceramic

Shim, J. H., Cha, S. W., O'Hayre, R., Gür, T. M. & Prinz, F. B., 2006, In : ECS Transactions. 3, 1, p. 1059-1068 10 p.

Research output: Contribution to journalConference article

2 Citations (Scopus)
2005

Aeroelastic response and active control of an airfoil in subsonic compressible flow

Na, S., Jeong, I. J., Librescu, L. & Marzocca, P., 2005, In : Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 4, p. 2406-2420 15 p.

Research output: Contribution to journalConference article

2 Citations (Scopus)

Disposable biosensor for measuring red blood cell deformability using laser-diffraction technique

Shin, S., Ku, Y., Park, M. & Suh, J., 2005, In : Progress in Biomedical Optics and Imaging - Proceedings of SPIE. 5651, p. 68-77 10 p., 12.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Disposable laser-diffraction ektacytometry to measure red blood cell deformability

Shin, S., Ku, Y., Park, M., Zhang, L., Jang, J. & Suh, J., 2005, In : Progress in Biomedical Optics and Imaging - Proceedings of SPIE. 5630 I, p. 168-176 9 p., 30.

Research output: Contribution to journalConference article

Hemodynamic investigation on blood flow in a rugged microchannel

Park, C. W., Kim, G. M., Shin, S. H., Lee, S. J., Ku, Y. H. & Jang, J. H., 2005, In : Proceedings of SPIE - The International Society for Optical Engineering. 6050, 60500Y.

Research output: Contribution to journalConference article

Laser based hybrid inkjet printing of nanoink for flexible electronics

Ko, S. H., Chung, J., Choi, Y., Grigoropoulos, C. P., Bieri, N. R., Choi, T. Y., Dockendorf, C. & Poulikakos, D., 2005, In : Proceedings of SPIE - The International Society for Optical Engineering. 5713, p. 97-104 8 p., 17.

Research output: Contribution to journalConference article

10 Citations (Scopus)
1 Citation (Scopus)

The effect of frequency of electromagnetic vibration on the primary silicon size in hypereutectic Al-Si alloy

Yoon, E. P., Choi, J. P., Park, J. P., Kim, K. B., Yoon, W. Y., Kim, M. H., Kim, K. H. & Nam, T. W., 2005, In : Materials Science Forum. 475-479, I, p. 413-416 4 p.

Research output: Contribution to journalConference article

2004

Aeroelastic response of flapped wing systems using robust estimation methodology

Na, S., Librescu, L., Marzocca, P., Kim, M. H. & Jeong, I. J., 2004, In : Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 3, p. 1764-1775 12 p.

Research output: Contribution to journalConference article

4 Citations (Scopus)

An effective method for measuring elastic modulus of large TFT-LCD panels

Kim, Y. J., Koo, J. C., Moon, S. I. & Kim, Y. J., 2004, In : Key Engineering Materials. 270-273, III, p. 1767-1772 6 p.

Research output: Contribution to journalConference article

A robust method for Ramberg-Osgood fit relevant to elastic-plastic J estimates

Huh, N. S., Kim, Y. J., Kim, Y. J., Choi, Y. H. & Yang, J. S., 2004, In : Key Engineering Materials. 261-263, I, p. 195-200 6 p.

Research output: Contribution to journalConference article

Comments on probabilistic fracture mechanics analysis of cracked components

Huh, N. S., Shim, D. J., Kim, Y. J., Lee, K. H. & Kim, Y. J., 2004, In : Key Engineering Materials. 270-273, III, p. 1755-1760 6 p.

Research output: Contribution to journalConference article

Control of a mobile robot with passive multiple trailers

Park, M., Chung, W., Kim, M. & Song, J., 2004, In : Proceedings - IEEE International Conference on Robotics and Automation. 2004, 5, p. 4369-4374 6 p.

Research output: Contribution to journalConference article

41 Citations (Scopus)

Direct attachment of carbon nanotube on scanning probe tip using dielectrophoresis

Han, C. S., Lee, H. W., Ryu, S. H., Kim, S. H. & Kwak, Y. K., 2004, In : Proceedings of SPIE - The International Society for Optical Engineering. 5275, p. 239-246 8 p.

Research output: Contribution to journalConference article

5 Citations (Scopus)

Door opening control using the multi-fingered robotic hand for the indoor service robot

Rhee, C., Chung, W., Kim, M., Shim, Y. & Lee, H., 2004, In : Proceedings - IEEE International Conference on Robotics and Automation. 2004, 4, p. 4011-4016 6 p.

Research output: Contribution to journalConference article

38 Citations (Scopus)

Effect of bubbling on the primary silicon in hypereutectic Al-Si alloy

Choi, J. P., Lee, S. J., Yoon, E. P., Yoon, W. Y., Kim, M. H. & Kim, K. H., 2004, In : Materials Science Forum. 449-452, I, p. 153-156 4 p.

Research output: Contribution to journalConference article

3 Citations (Scopus)

Energy-based control of a passive haptic device

Cho, C., Song, J. B., Kim, M. & Hwang, C. S., 2004, In : Proceedings - IEEE International Conference on Robotics and Automation. 2004, 1, p. 292-297 6 p.

Research output: Contribution to journalConference article

8 Citations (Scopus)

Heterogeneous crystallization of amorphous silicon expedited by external force fields: A molecular dynamics study

Park, S. H., Kim, H. J., Lee, D. B., Lee, J. S., Choi, Y. K. & Kwon, O. M., 2004 Mar, In : Superlattices and Microstructures. 35, 3-6, p. 205-215 11 p.

Research output: Contribution to journalConference article

6 Citations (Scopus)

Implementation of multi-functional service robots using tripodal schematic control architecture

Kim, G., Chung, W., Kim, M. & Lee, C., 2004, In : Proceedings - IEEE International Conference on Robotics and Automation. 2004, 4, p. 4005-4010 6 p.

Research output: Contribution to journalConference article

17 Citations (Scopus)

In-plane single-crystal-silicon microneedles for minimally invasive microfluid systems

Paik, S. J., Byun, S., Lim, J. M., Park, Y., Lee, A., Chung, S., Chang, J., Chun, K. & Cho, D., 2004 Sep 1, In : Sensors and Actuators, A: Physical. 114, 2-3, p. 276-284 9 p.

Research output: Contribution to journalConference article

86 Citations (Scopus)

Integrated localization of the service robot PSR

Lee, D., Chung, W. & Kim, M., 2004, In : Proceedings - IEEE International Conference on Robotics and Automation. 2004, 4, p. 4017-4022 6 p.

Research output: Contribution to journalConference article

3 Citations (Scopus)

Integrated navigation system for indoor service robots in large-scale environments

Chung, W., Kim, G., Kim, M. & Lee, C., 2004, In : Proceedings - IEEE International Conference on Robotics and Automation. 2004, 5, p. 5099-5104 6 p.

Research output: Contribution to journalConference article

14 Citations (Scopus)

Manufacturing of nanoscale thickness gold lines by laser curing of a discretely deposited nanoparticle suspension

Bieri, N. R., Chung, J., Poulikakos, D. & Grigoropoulos, C. P., 2004 Mar, In : Superlattices and Microstructures. 35, 3-6, p. 437-444 8 p.

Research output: Contribution to journalConference article

79 Citations (Scopus)