School of Mechanical Engineering

  • Korea, Republic of

Research Output

Filter
Conference article

Active aeroelastic control of 2-D wing-flap systems in an incompressible flowfield

Librescu, L., Na, S., Marzocca, P., Chung, C. & Kwak, M. K., 2003, In : Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 1, p. 150-160 11 p.

Research output: Contribution to journalConference article

4 Citations (Scopus)

Aeroelastic response and active control of an airfoil in subsonic compressible flow

Na, S., Jeong, I. J., Librescu, L. & Marzocca, P., 2005, In : Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 4, p. 2406-2420 15 p.

Research output: Contribution to journalConference article

2 Citations (Scopus)

Aeroelastic response of flapped wing systems using robust estimation methodology

Na, S., Librescu, L., Marzocca, P., Kim, M. H. & Jeong, I. J., 2004, In : Collection of Technical Papers - AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference. 3, p. 1764-1775 12 p.

Research output: Contribution to journalConference article

4 Citations (Scopus)

Analytical models for predicting mechanical properties of self-expandable metal stents with cover membrane

Moon, T., Hong, D., Chun, H. J., Hyun, J. H. & Lee, K. B., 2001, In : Annual Reports of the Research Reactor Institute, Kyoto University. 1, p. 163-166 4 p.

Research output: Contribution to journalConference article

An effective method for measuring elastic modulus of large TFT-LCD panels

Kim, Y. J., Koo, J. C., Moon, S. I. & Kim, Y. J., 2004, In : Key Engineering Materials. 270-273, III, p. 1767-1772 6 p.

Research output: Contribution to journalConference article

Open Access

A numerical investigation of mixing characteristics of a direct-injection (DI) engine with liquefied petroleum gas

Lee, J. S., Seo, J., Kim, H. Y. & Park, S., 2013, In : SAE Technical Papers. 1

Research output: Contribution to journalConference article

1 Citation (Scopus)
Open Access

A reliable position estimation method of the service robot by map matching

Lee, D., Chung, W. & Kim, M., 2003, In : Proceedings - IEEE International Conference on Robotics and Automation. 2, p. 2830-2835 6 p.

Research output: Contribution to journalConference article

24 Citations (Scopus)
Open Access

CO2 absorption/regeneration performance enhancement by nanoabsorbents

Kang, Y. T. & Kim, S., 2018 Jan 1, In : International Heat Transfer Conference. 2018-August, p. 385-391 7 p.

Research output: Contribution to journalConference article

Comments on probabilistic fracture mechanics analysis of cracked components

Huh, N. S., Shim, D. J., Kim, Y. J., Lee, K. H. & Kim, Y. J., 2004, In : Key Engineering Materials. 270-273, III, p. 1755-1760 6 p.

Research output: Contribution to journalConference article

5 Citations (Scopus)

Condensation heat transfer and pressure drop characteristics of low GWP refrigerants in plate heat exchanger

Kwon, O. J., Jung, J. H. & Kang, Y. T., 2018 Jan 1, In : International Heat Transfer Conference. 2018-August, p. 5019-5024 6 p.

Research output: Contribution to journalConference article

Control of a mobile robot with passive multiple trailers

Park, M., Chung, W., Kim, M. & Song, J., 2004, In : Proceedings - IEEE International Conference on Robotics and Automation. 2004, 5, p. 4369-4374 6 p.

Research output: Contribution to journalConference article

41 Citations (Scopus)
5 Citations (Scopus)

Design of a 6 DOF haptic master for teleoperation of a mobile manipulator

Ryu, D., Cho, C., Kim, M. & Song, J. B., 2003, In : Proceedings - IEEE International Conference on Robotics and Automation. 3, p. 3243-3248 6 p.

Research output: Contribution to journalConference article

15 Citations (Scopus)

Design of a four-wheeled omnidirectional mobile robot with variable wheel arrangement mechanism

Byun, K. S., Kim, S. J. & Song, J. B., 2002, In : Proceedings - IEEE International Conference on Robotics and Automation. 1, p. 720-725 6 p.

Research output: Contribution to journalConference article

34 Citations (Scopus)

Design of continuous alternate wheels for omnidirectional mobile robots

Byun, K. S., Kim, S. J. & Song, J. B., 2001, In : Proceedings - IEEE International Conference on Robotics and Automation. 1, p. 767-772 6 p.

Research output: Contribution to journalConference article

13 Citations (Scopus)

Detecting tool wear in face milling with different workpiece materials

Cho, D. W., Choi, W. C. & Lee, H. Y., 2000, In : Key Engineering Materials. 183, p. I/-

Research output: Contribution to journalConference article

Development of a humanoid robot CENTAUR - design, human interface, planning and control of its upper-body

Kim, M., Kang, S., Lee, S., Chung, W., Cho, K. & Lee, C. W., 1999, In : Proceedings of the IEEE International Conference on Systems, Man and Cybernetics. 4, p. IV-948 - IV-953

Research output: Contribution to journalConference article

2 Citations (Scopus)

Development of mems-based intravascular micro active catheter system

Chang, J. K., Chung, S., Lee, S. K., Yang, S. Y., Moon, S. Y. & Han, D. C., 2000, In : ASAIO Journal. 46, 2, 1 p.

Research output: Contribution to journalConference article

Development of polymer micro check valve for cerebrospinal fluid shunt system

Chang, J. K., Chung, S., Kim, J., Kim, S. K. & Wang, K. C., 2000, In : ASAIO Journal. 46, 2, 1 p.

Research output: Contribution to journalConference article

Door opening control using the multi-fingered robotic hand for the indoor service robot

Rhee, C., Chung, W., Kim, M., Shim, Y. & Lee, H., 2004, In : Proceedings - IEEE International Conference on Robotics and Automation. 2004, 4, p. 4011-4016 6 p.

Research output: Contribution to journalConference article

39 Citations (Scopus)

Effect of bubbling on the primary silicon in hypereutectic Al-Si alloy

Choi, J. P., Lee, S. J., Yoon, E. P., Yoon, W. Y., Kim, M. H. & Kim, K. H., 2004, In : Materials Science Forum. 449-452, I, p. 153-156 4 p.

Research output: Contribution to journalConference article

3 Citations (Scopus)

Energy-based control of a passive haptic device

Cho, C., Song, J. B., Kim, M. & Hwang, C. S., 2004, In : Proceedings - IEEE International Conference on Robotics and Automation. 2004, 1, p. 292-297 6 p.

Research output: Contribution to journalConference article

8 Citations (Scopus)

Evaluation of carbon dioxide as R-22 substitute for residential air-conditioning

Brown, J. S., Kim, Y. & Domanski, P. A., 2002, In : ASHRAE Transactions. 108 PART 2, p. 954-963 10 p.

Research output: Contribution to journalConference article

19 Citations (Scopus)

Exact locating of sub-surface microelectronic structures using scanning thermal wave microscopy

Chung, J., Kim, K., Hwang, G., Kwon, O., Lee, J. S., Park, S. & Choi, Y. K., 2008, In : Proceedings of SPIE - The International Society for Optical Engineering. 7268, 72681V.

Research output: Contribution to journalConference article

Experimental study on diffusion absorption refrigeration cycle using low GWP refrigerants

Jung, H. S., Kim, G. & Kang, Y. T., 2018 Jan 1, In : Refrigeration Science and Technology. Part F147651, p. 48-55 8 p.

Research output: Contribution to journalConference article

Fatigue properties of surface-micromachined Al-3%Ti thin films

Park, J. H., Myung, M. S. & Kim, Y. J., 2007, In : Key Engineering Materials. 353-358, PART 1, p. 299-302 4 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)

Fatigue strength evaluation of load-carrying fillet weldments under out-of-plane bending load using structural stress method

Kim, M. H., Kang, S. W., Ha, C. I., Lee, J. M., Kim, J. H. & Na, S. S., 2007, In : Key Engineering Materials. 353-358, PART 3, p. 2069-2072 4 p.

Research output: Contribution to journalConference article

Fuel effect on particle emissions of a direct injection engine

Kim, Y., Kim, Y., Kang, J., Jun, S., Rew, S., Lee, D. & Park, S., 2013, In : SAE Technical Papers. 2

Research output: Contribution to journalConference article

9 Citations (Scopus)

Heterogeneous crystallization of amorphous silicon expedited by external force fields: A molecular dynamics study

Park, S. H., Kim, H. J., Lee, D. B., Lee, J. S., Choi, Y. K. & Kwon, O. M., 2004 Mar, In : Superlattices and Microstructures. 35, 3-6, p. 205-215 11 p.

Research output: Contribution to journalConference article

6 Citations (Scopus)

Implementation of multi-functional service robots using tripodal schematic control architecture

Kim, G., Chung, W., Kim, M. & Lee, C., 2004, In : Proceedings - IEEE International Conference on Robotics and Automation. 2004, 4, p. 4005-4010 6 p.

Research output: Contribution to journalConference article

17 Citations (Scopus)

Independent assessment of the major nuclear transient without excessive conservatism

Lee, I. S., Cho, M. K., Baek, K. L. & Kim, Y. C., 2019 Jan 1, In : Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering. 162.

Research output: Contribution to journalConference article

Open Access

Integrated localization of the service robot PSR

Lee, D., Chung, W. & Kim, M., 2004, In : Proceedings - IEEE International Conference on Robotics and Automation. 2004, 4, p. 4017-4022 6 p.

Research output: Contribution to journalConference article

3 Citations (Scopus)

Integrated navigation system for indoor service robots in large-scale environments

Chung, W., Kim, G., Kim, M. & Lee, C., 2004, In : Proceedings - IEEE International Conference on Robotics and Automation. 2004, 5, p. 5099-5104 6 p.

Research output: Contribution to journalConference article

14 Citations (Scopus)

Kinematic synthesis of a medical bed for decubitus ulcer patients

Shim, J. K., Shim, C. S. & Kwon, J. W., 2003, In : American Society of Mechanical Engineers, Bioengineering Division (Publication) BED. 55, p. 159-160 2 p.

Research output: Contribution to journalConference article

2 Citations (Scopus)

Laser based hybrid inkjet printing of nanoink for flexible electronics

Ko, S. H., Chung, J., Choi, Y., Grigoropoulos, C. P., Bieri, N. R., Choi, T. Y., Dockendorf, C. & Poulikakos, D., 2005, In : Proceedings of SPIE - The International Society for Optical Engineering. 5713, p. 97-104 8 p., 17.

Research output: Contribution to journalConference article

10 Citations (Scopus)

Microstructure characterizations of hypereutectic Al-Si alloys with different undercooling levels

Kang, H. S., Yoon, W. Y., Kim, K. H., Kim, M. H. & Yoon, E. P., 2004, In : Materials Science Forum. 449-452, I, p. 169-172 4 p.

Research output: Contribution to journalConference article

2 Citations (Scopus)

Nano-biomimetic cutaneous sensor

Han, C. S., Na, S. & Chun, K. Y., 2018, In : World Congress on Recent Advances in Nanotechnology. 144.

Research output: Contribution to journalConference article

Open Access

New approach of radial expansile force measurement of self-expandable esophageal metal stents

Moon, T., Chun, H. J., Jeen, Y. T., Hyun, J. H., Hong, D. & Lee, K. B., 2000, In : ASAIO Journal. 46, 2, 1 p.

Research output: Contribution to journalConference article

1 Citation (Scopus)
Open Access

Numerical Simulation of Thermal Ageing Effect on Fracture Behavior for CF8A Cast Stainless Steels under Very Low Cyclic Loading Conditions

Youn, G. G., Nam, H. S., Kim, Y-J. & Kim, J. W., 2018 Jan 1, In : Procedia Structural Integrity. 13, p. 1297-1304 8 p.

Research output: Contribution to journalConference article

Open Access

Numerical Study on the Performance of Vapor Compression Liquid Chillers using R32 and R410A.

Lee, J. H., Kang, H., Jung, J., Lim, J., Cho, W. & Kim, Y. C., 2018 Jan 1, In : Refrigeration Science and Technology. Part F147651, p. 144-151 8 p.

Research output: Contribution to journalConference article

Performance characteristics of a polymer electrolyte fuel cell with the anodic supply mode

Lee, Y., Jang, Y. H., Jung, T., Chung, J. T. & Kim, Y., 2006, In : ECS Transactions. 3, 1, p. 871-878 8 p.

Research output: Contribution to journalConference article

7 Citations (Scopus)

Performance characteristics of pulsating heat pipe with various non-uniform heating conditions

Cho, W., Jang, D. S., Lim, J., Song, K. & Kim, Y. C., 2018 Jan 1, In : International Heat Transfer Conference. 2018-August, p. 4789-4794 6 p.

Research output: Contribution to journalConference article