School of Mechanical Engineering

  • Korea, Republic of

Research Output

Filter
Conference article
Conference article
Open Access
Open Access

An upwind interpolation scheme for cavitating flows on nonuniform meshes

Yoon, S. S. & Srinivasan, B., 2001 Dec 1, In : Advances in Fluid Mechanics. 29, p. 241-250 10 p.

Research output: Contribution to journalConference article

Open Access

CO2 absorption/regeneration performance enhancement by nanoabsorbents

Kang, Y. T. & Kim, S., 2018 Jan 1, In : International Heat Transfer Conference. 2018-August, p. 385-391 7 p.

Research output: Contribution to journalConference article

Comments on probabilistic fracture mechanics analysis of cracked components

Huh, N. S., Shim, D. J., Kim, Y. J., Lee, K. H. & Kim, Y. J., 2004 Nov 25, In : Key Engineering Materials. 270-273, III, p. 1755-1760 6 p.

Research output: Contribution to journalConference article

Condensation heat transfer and pressure drop characteristics of low GWP refrigerants in plate heat exchanger

Kwon, O. J., Jung, J. H. & Kang, Y. T., 2018 Jan 1, In : International Heat Transfer Conference. 2018-August, p. 5019-5024 6 p.

Research output: Contribution to journalConference article

Design of continuous alternate wheels for omnidirectional mobile robots

Byun, K. S., Kim, S. J. & Song, J. B., 2001 Jan 1, In : Proceedings - IEEE International Conference on Robotics and Automation. 1, p. 767-772 6 p.

Research output: Contribution to journalConference article

13 Citations (Scopus)

Design of the chained form manipulator

Chung, W. & Nakamura, Y., 1997 Jan 1, In : Proceedings - IEEE International Conference on Robotics and Automation. 1, p. 455-461 7 p.

Research output: Contribution to journalConference article

10 Citations (Scopus)

Development of a fully coupled injection/atomization code

Yoon, S. S., Pham, T. L. & Heister, S. D., 2001 Dec 1, In : Advances in Fluid Mechanics. 29, p. 265-273 9 p.

Research output: Contribution to journalConference article

Development of a humanoid robot CENTAUR - design, human interface, planning and control of its upper-body

Kim, M., Kang, S., Lee, S., Chung, W., Cho, K. & Lee, C. W., 1999 Dec 1, In : Proceedings of the IEEE International Conference on Systems, Man and Cybernetics. 4, p. IV-948 - IV-953

Research output: Contribution to journalConference article

2 Citations (Scopus)

Direct attachment of carbon nanotube on scanning probe tip using dielectrophoresis

Han, C. S., Lee, H. W., Ryu, S. H., Kim, S. H. & Kwak, Y. K., 2004 Jun 1, In : Proceedings of SPIE - The International Society for Optical Engineering. 5275, p. 239-246 8 p.

Research output: Contribution to journalConference article

5 Citations (Scopus)

Direct fabrication and patterning of transparent conductive carbon nanotube film using inkjet printing

Song, J. W., Yoon, Y. H., Kim, J., Han, C. S., Choi, B. S. & Kim, J. H., 2007 Jan 1, In : Digest of Technical Papers - SID International Symposium. 38, 1, p. 1613-1616 4 p.

Research output: Contribution to journalConference article

2 Citations (Scopus)

Disposable laser-diffraction ektacytometry to measure red blood cell deformability

Shin, S., Ku, Y., Park, M., Zhang, L., Jang, J. & Suh, J., 2005 Jul 21, In : Progress in Biomedical Optics and Imaging - Proceedings of SPIE. 5630 I, p. 168-176 9 p., 30.

Research output: Contribution to journalConference article

Door opening control using the multi-fingered robotic hand for the indoor service robot

Rhee, C., Chung, W., Kim, M., Shim, Y. & Lee, H., 2004 Jul 5, In : Proceedings - IEEE International Conference on Robotics and Automation. 2004, 4, p. 4011-4016 6 p.

Research output: Contribution to journalConference article

38 Citations (Scopus)
10 Citations (Scopus)

Effect of bubbling on the primary silicon in hypereutectic Al-Si alloy

Choi, J. P., Lee, S. J., Yoon, E. P., Yoon, W. Y., Kim, M. H. & Kim, K. H., 2004 Jan 1, In : Materials Science Forum. 449-452, I, p. 153-156 4 p.

Research output: Contribution to journalConference article

3 Citations (Scopus)

Experimental study on diffusion absorption refrigeration cycle using low GWP refrigerants

Jung, H. S., Kim, G. & Kang, Y. T., 2018 Jan 1, In : Refrigeration Science and Technology. Part F147651, p. 48-55 8 p.

Research output: Contribution to journalConference article

Fatigue strength evaluation of load-carrying fillet weldments under out-of-plane bending load using structural stress method

Kim, M. H., Kang, S. W., Ha, C. I., Lee, J. M., Kim, J. H. & Na, S. S., 2007 Jan 1, In : Key Engineering Materials. 353-358, PART 3, p. 2069-2072 4 p.

Research output: Contribution to journalConference article

Heterogeneous crystallization of amorphous silicon expedited by external force fields: A molecular dynamics study

Park, S. H., Kim, H. J., Lee, D. B., Lee, J. S., Choi, Y. K. & Kwon, O. M., 2004 Mar 1, In : Superlattices and Microstructures. 35, 3-6, p. 205-215 11 p.

Research output: Contribution to journalConference article

6 Citations (Scopus)

Human and robot integrated teleoperation

Lee, S., Choi, D. S., Kim, M., Lee, C. W. & Song, J. B., 1998 Dec 1, In : Proceedings of the IEEE International Conference on Systems, Man and Cybernetics. 2, p. 1213-1218 6 p.

Research output: Contribution to journalConference article

5 Citations (Scopus)

Implementation of multi-functional service robots using tripodal schematic control architecture

Kim, G., Chung, W., Kim, M. & Lee, C., 2004 Jul 5, In : Proceedings - IEEE International Conference on Robotics and Automation. 2004, 4, p. 4005-4010 6 p.

Research output: Contribution to journalConference article

17 Citations (Scopus)

Independent assessment of the major nuclear transient without excessive conservatism

Lee, I. S., Cho, M. K., Baek, K. L. & Kim, Y. C., 2019 Jan 1, In : Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering. 162.

Research output: Contribution to journalConference article

Open Access

Laser curing of gold nanoparticle inks

Chung, J., Ko, S., Bieri, N. R., Grigoropoulos, C. P. & Poulikakos, D., 2003 Jan 1, In : American Society of Mechanical Engineers, Heat Transfer Division, (Publication) HTD. 374, 3, p. 131-140 10 p.

Research output: Contribution to journalConference article

2 Citations (Scopus)
Open Access

Numerical Simulation of Thermal Ageing Effect on Fracture Behavior for CF8A Cast Stainless Steels under Very Low Cyclic Loading Conditions

Youn, G. G., Nam, H. S., Kim, Y-J. & Kim, J. W., 2018 Jan 1, In : Procedia Structural Integrity. 13, p. 1297-1304 8 p.

Research output: Contribution to journalConference article

Open Access

Numerical Study on the Performance of Vapor Compression Liquid Chillers using R32 and R410A.

Lee, J. H., Kang, H., Jung, J., Lim, J., Cho, W. & Kim, Y. C., 2018 Jan 1, In : Refrigeration Science and Technology. Part F147651, p. 144-151 8 p.

Research output: Contribution to journalConference article

Performance characteristics of a polymer electrolyte fuel cell with the anodic supply mode

Lee, Y., Jang, Y. H., Jung, T., Chung, J. T. & Kim, Y., 2006 Dec 1, In : ECS Transactions. 3, 1, p. 871-878 8 p.

Research output: Contribution to journalConference article

7 Citations (Scopus)

Performance characteristics of pulsating heat pipe with various non-uniform heating conditions

Cho, W., Jang, D. S., Lim, J., Song, K. & Kim, Y. C., 2018 Jan 1, In : International Heat Transfer Conference. 2018-August, p. 4789-4794 6 p.

Research output: Contribution to journalConference article

Safety evaluation of socket weld integrity in nuclear piping

Choi, Y. H., Choi, S. Y., Kim, Y. J., Kim, Y. J. & Kim, H. J., 2004 Nov 25, In : Key Engineering Materials. 270-273, III, p. 1725-1730 6 p.

Research output: Contribution to journalConference article

7 Citations (Scopus)

Simplified impact analysis based on equivalent static analysis for impact design of TFT-LCD panels

Kim, Y. J., Koo, J. C., Moon, S. I. & Kim, Y. J., 2004 Nov 25, In : Key Engineering Materials. 270-273, I, p. 114-119 6 p.

Research output: Contribution to journalConference article

2 Citations (Scopus)

Strategies for particle emissions reduction from GDI engines

Kim, Y., Kim, Y., Jun, S., Lee, K. H., Rew, S., Lee, D. & Park, S., 2013 Jan 1, In : SAE Technical Papers. 2

Research output: Contribution to journalConference article

10 Citations (Scopus)

Tests and analyses for fully plastic fracture mechanics of plane strain mode I crack growth

McClintock, F. A., Kim, Y. J. & Parks, D. M., 1995 Dec 1, In : ASTM Special Technical Publication. 1256, p. 199-222 24 p.

Research output: Contribution to journalConference article

6 Citations (Scopus)

Thermal management of lithium-ion battery using heat pipes

Yoon, J. W., Jang, D. S., Yun, S., Shin, H. H. & Kim, Y., 2019 Jan 1, In : Proceedings of the World Congress on Mechanical, Chemical, and Material Engineering. 173.

Research output: Contribution to journalConference article

Transient analysis and design model of a LiBr-H2O absorber with rotating drums

Kang, Y. T. & Christensen, R. N., 1995 Jan 1, In : ASHRAE Transactions. 1, p. 1163-1174 12 p.

Research output: Contribution to journalConference article

5 Citations (Scopus)

Tunable AC thermal anemometry

Chung, W. S., Kwon, O., Choi, D. S., Park, S., Choi, Y. K. & Lee, J. S., 2004 Mar 1, In : Superlattices and Microstructures. 35, 3-6, p. 325-338 14 p.

Research output: Contribution to journalConference article

6 Citations (Scopus)

Two-phase flow of HFC-134a and CFC-12 through short-tube orifices

Kim, Y., O'Neal, D. L. & Yuan, X., 1994 Dec 1, In : ASHRAE Transactions. 100, 2, p. 582-591 10 p.

Research output: Contribution to journalConference article

20 Citations (Scopus)

Two-phase flow of R-22 through short-tube orifices

Kim, Y. & O'Neal, D. L., 1994 Dec 1, In : ASHRAE Transactions. 100, 1, p. 323-334 12 p.

Research output: Contribution to journalConference article

41 Citations (Scopus)