• 752 Citations
  • 15 h-Index
19982020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

  • 752 Citations
  • 15 h-Index
  • 59 Article
  • 16 Conference contribution
  • 4 Paper
  • 3 Conference article
2020
1 Citation (Scopus)

Numerical Study on the Effects of Tumble and Swirl on Combustion and Emission Characteristics of an LPG Direct Injection Engine

Kim, H., Lee, S. Y., Kim, H. J. & Chung, J. T., 2020 Jun 1, In : International Journal of Automotive Technology. 21, 3, p. 623-632 10 p.

Research output: Contribution to journalArticle

Scale-Adaptive Simulation of the Unsteady Turbulent Flow in a High-Speed Centrifugal Compressor with a Wedge-Type Vaned Diffuser

Zamiri, A., Choi, M. & Chung, J. T., 2020 Jan 1, In : Flow, Turbulence and Combustion. 104, 1, p. 45-69 25 p.

Research output: Contribution to journalArticle

2019

Influence of spear needle eccentricity on jet quality in micro Pelton turbine for power generation

Jung, I. H., Kim, Y. S., Shin, D. H., Chung, J. T. & Shin, Y., 2019 May 15, In : Energy. 175, p. 58-65 8 p.

Research output: Contribution to journalArticle

Influences of the flow cut and axial lift of the impeller on the aerodynamic performance of a transonic centrifugal compressor

Park, K. S., Jung, I. H., You, S. J., Lee, S. Y., Zamiri, A. & Chung, J. T., 2019 Nov 27, In : Energies. 12, 23, 4503.

Research output: Contribution to journalArticle

Open Access

Numerical analysis of the aerodynamic performance & heat transfer of a transonic turbine with a partial squealer tip

Kim, J. H., Lee, S. Y. & Chung, J. T., 2019 Apr 1, In : Applied Thermal Engineering. 152, p. 878-889 12 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Optimal design of generators for H2O/LiBr absorption chiller with multi-heat sources

Lee, S. K., Lee, J. W., Lee, H., Chung, J. T. & Kang, Y. T., 2019 Jan 15, In : Energy. 167, p. 47-59 13 p.

Research output: Contribution to journalArticle

6 Citations (Scopus)
2018

Effects of injection strategies on the flow and fuel behavior characteristics in port dual injection engine

Lee, S. Y., Lee, H. J., Kang, Y. T. & Chung, J. T., 2018 Dec 15, In : Energy. 165, p. 666-676 11 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Numerical evaluation of a compact generator design for steam driven H2O/LiBr absorption chiller application

Lee, S. Y., Lee, S. K., Chung, J. T. & Kang, Y. T., 2018 Jun 1, In : Energy. 152, p. 512-520 9 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Numerical evaluation of turbulent flow structures in a stirred tank with a Rushton turbine based on scale-adaptive simulation

Zamiri, A. & Chung, J. T., 2018 Jul 15, In : Computers and Fluids. 170, p. 236-248 13 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Numerical Study on Fluid Flow and Heat Transfer Characteristics of a Ventilated Brake Disc Connected to a Wheel

Lee, B. J., Chung, J. T., Jung, Y., Kim, H., Lee, S. & Kim, H. Y., 2018 Oct 5, In : SAE Technical Papers. 2018-October, October

Research output: Contribution to journalConference article

Scale adaptive simulation of transient behavior in a transonic centrifugal compressor with a vaned diffuser

Zamiri, A. & Chung, J. T., 2018 Jan 1, Turbomachinery. American Society of Mechanical Engineers (ASME), Vol. 2C-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Theoretical analysis of loss coefficients affecting pelton turbine performance

Jung, I. H., Park, J. H., Kim, Y. S., Shin, Y. & Chung, J. T., 2018 May 1, In : Transactions of the Korean Society of Mechanical Engineers, B. 42, 5, p. 325-331 7 p.

Research output: Contribution to journalArticle

2017

Ability of URANS approach in prediction of unsteady turbulent flows in an unbaffled stirred tank

Zamiri, A. & Chung, J. T., 2017 Nov 1, In : International Journal of Mechanical Sciences. 133, p. 178-187 10 p.

Research output: Contribution to journalArticle

5 Citations (Scopus)

High efficiency H2O/LiBr double effect absorption cycles with multi-heat sources for tri-generation application

Yang, M., Lee, S. Y., Chung, J. T. & Kang, Y. T., 2017 Feb 1, In : Applied Energy. 187, p. 243-254 12 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Hydrodynamic design and performance testing of pelton-type energy recovery turbine for pressure-retarded osmosis systems

Park, J. H., Kim, Y. S., Jung, I. H., Shin, Y. & Chung, J. T., 2017 Dec 1, In : Desalination and Water Treatment. 99, p. 132-139 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Influence of the inclined leading edge diffuser vanes on the aerodynamic performance of a transonic centrifugal compressor

Zamiri, A., Lee, B. J. & Chung, J. T., 2017 Nov 1, In : Journal of Mechanical Science and Technology. 31, 11, p. 5557-5568 12 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Modelling and optimization for a high temperature generator of absorption chiller

Lee, S. K., Chung, J. T. & Kang, Y. T., 2017 Jan 1, Proceedings of the 3nd World Congress on Mechanical, Chemical, and Material Engineering, MCM 2017. Avestia Publishing

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical analysis of a non-Newtonian fluid in agitated vessel with PBT-Rushton combined impeller

Mohd Ali, U. I., Zamiri, A., Lee, S. Y. & Chung, J. T., 2017 Jan 1, In : International Conference on Fluid Flow, Heat and Mass Transfer.

Research output: Contribution to journalConference article

Numerical evaluation of transient flow characteristics in a transonic centrifugal compressor with vaned diffuser

Zamiri, A., Lee, B. J. & Chung, J. T., 2017 Nov 1, In : Aerospace Science and Technology. 70, p. 244-256 13 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Numerical investigation of the inclined leading edge diffuser vane effects on the flow unsteadiness and noise characteristics in a transonic centrifugal compressor

Zamiri, A., Lee, B. J. & Chung, J. T., 2017, Turbomachinery. American Society of Mechanical Engineers (ASME), Vol. 2C-2017.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical studies on thermal hydraulic performance of zigzag-type printed circuit heat exchanger with inserted straight channels

Lee, S. Y., Park, B. G. & Chung, J. T., 2017 Aug 1, In : Applied Thermal Engineering. 123, p. 1434-1443 10 p.

Research output: Contribution to journalArticle

11 Citations (Scopus)

Theoretical method of selecting number of buckets for the design and verification of a Pelton turbine

Kim, J. W., Jo, I. C., Park, J. H., Shin, Y. & Chung, J. T., 2017 Sep 3, In : Journal of Hydraulic Research. 55, 5, p. 695-705 11 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)
2016

Development of high efficiency double-effect absorption cycles using multi-heat sources

Yang, M., Jung, C. W., Kim, G. S., Chung, J. T. & Kang, Y. T., 2016, ACRA 2016 - 8th Asian Conference on Refrigeration and Air-Conditioning. Asian Conference on Refrigeration and Air Conditioning (ACRA)

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effects of inlet velocity profile on flow and heat transfer in the entrance region of a ribbed channel

Kim, D. H., Lee, B. J., Park, J. S., Kwak, J. S. & Chung, J. T., 2016 Jan 1, In : International Journal of Heat and Mass Transfer. 92, p. 838-849 12 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Heat transfer and secondary flow with a multicavity gas turbine blade tip

Park, J. S., Lee, S. H., Lee, W. S., Chung, J. T. & Kwak, J. S., 2016, In : Journal of Thermophysics and Heat Transfer. 30, 1, p. 120-129 10 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Jet quality characteristics according to nozzle shape of energy-recovery Pelton turbines in pressure-retarded osmosis

Jo, I. C., Park, J. H., Kim, J. W., Shin, Y. & Chung, J. T., 2016 Mar 1, (Accepted/In press) In : Desalination and Water Treatment. p. 1-10 10 p.

Research output: Contribution to journalArticle

7 Citations (Scopus)

Nu and Sh correlations for LiCl solution and moist air in plate type dehumidifier

Lee, J. H., Jung, C. W., Chang, Y. S., Chung, J. T. & Kang, Y. T., 2016 Sep 1, In : International Journal of Heat and Mass Transfer. 100, p. 433-444 12 p.

Research output: Contribution to journalArticle

15 Citations (Scopus)

Numerical evaluation of the unsteady flow in a centrifugal compressor with Vaned diffuser via Urans approach

Zamiri, A., Lee, B. J. & Chung, J. T., 2016, Turbomachinery. American Society of Mechanical Engineers (ASME), Vol. 2D-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2015
1 Citation (Scopus)

Theoretical analysis of bump-floating-ring seals

Lee, Y. B., Kim, K. W., Kim, C. H. & Chung, J. T., 2015, 2015 IFToMM World Congress Proceedings, IFToMM 2015. National Taiwan University

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

CO2 hydrate formation at atmospheric pressure using high efficiency absorbent and surfactants

Choi, J. W., Chung, J. T. & Kang, Y. T., 2014 Jan 1, In : Energy. 78, p. 869-876 8 p.

Research output: Contribution to journalArticle

39 Citations (Scopus)

Effect of triangular grooved tip on blade tip region heat transfer

Lee, W. S., Kim, D. H., Park, J. S., Kwak, J. S. & Chung, J. T., 2014, In : Journal of Thermophysics and Heat Transfer. 28, 2, p. 226-235 10 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Leakage performance and rotordynamic characteristics of bump floating ring seals for turbopump

Lee, Y. B., Kim, K. W., Ryu, S. J. & Chung, J. T., 2014, Proceedings of the ASME Turbo Expo. American Society of Mechanical Engineers (ASME), Vol. 7B.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
17 Citations (Scopus)
2013

Effect of inlet velocity profile on heat transfer in a rotating channel

Choi, E. Y., Park, J. S., Kim, D. H., Chung, J. T. & Kwak, J. S., 2013, In : Journal of Thermophysics and Heat Transfer. 27, 1, p. 61-69 9 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Effects of combustion parameters on reforming performance of a steam-methane reformer

Lee, J. S., Seo, J., Kim, H. Y., Chung, J. T. & Yoon, S. S., 2013, In : Fuel. 111, p. 461-471 11 p.

Research output: Contribution to journalArticle

16 Citations (Scopus)

Heat transfer augmentation using a rib-dimple compound cooling technique

Choi, E. Y., Choi, Y. D., Lee, W. S., Chung, J. T. & Kwak, J. S., 2013, In : Applied Thermal Engineering. 51, 1-2, p. 435-441 7 p.

Research output: Contribution to journalArticle

61 Citations (Scopus)

Measurement of blade tip heat transfer and leakage flow in a turbine cascade with a multi-cavity squealer tip

Park, J. S., Lee, S. H., Kwak, J. S., Lee, W. S. & Chung, J. T., 2013.

Research output: Contribution to conferencePaper

8 Citations (Scopus)

Numerical study of aerodynamics of turbine rotor with leading edge modification near hub

Kim, D. H., Lee, W. S. & Chung, J. T., 2013 Aug, In : Transactions of the Korean Society of Mechanical Engineers, A. 37, 8, p. 1007-1013 7 p.

Research output: Contribution to journalArticle

2012

Design and performance study of the ground-coupled heat pump system with an operating parameter

Chung, J. T. & Choi, J. M., 2012 Jun, In : Renewable Energy. 42, p. 118-124 7 p.

Research output: Contribution to journalArticle

29 Citations (Scopus)

Effects of blade-end open ratio on aerodynamic performance of multi-blade fan

Lee, H. H., Choi, H. C., Jung, J. G., Lee, Y. P., Shin, Y. & Chung, J. T., 2012, ASME 2012 Fluids Engineering Division Summer Meeting Collocated with the ASME 2012 Heat Transfer Summer Conf. and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels, and M, FEDSM 2012. PARTS A AND B ed. p. 497-504 8 p. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM; vol. 1, no. PARTS A AND B).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Study on the reduction of flow-induced noise through the suppression of vortex shedding at rotating disk edge

Oh, I. R., Kim, M. K., Jo, Y. W., Kim, D. H., Choi, Y. D., Moon, Y. J. & Chung, J. T., 2012, In : Journal of Mechanical Science and Technology. 26, 12, p. 3833-3841 9 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)
2011

Aerodynamic design and numerical study of a propane-refrigerant centrifugal compressor for LNG plant

Park, J. H., Lee, W. S., Shin, Y. H., Kim, K. H., Lee, Y. P. & Chung, J. T., 2011 Aug, In : Transactions of the Korean Society of Mechanical Engineers, B. 35, 8, p. 781-787 7 p.

Research output: Contribution to journalArticle

Dynamic characteristics of the combined smart bearing

Lee, Y. B., Lee, K. M., Chung, J. T., Kim, S. J. & Jeong, S. N., 2011, ASME/STLE 2011 International Joint Tribology Conference, IJTC 2011. p. 337-339 3 p. (American Society of Mechanical Engineers, Tribology Division, TRIB).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Investigation of the cause of a malfunction in a display package and its solution

Kim, J. C., Lee, D. J., Hwang, S. W., Ju, B. K., Yun, S. K., Park, H. W. & Chung, J. T., 2011, In : IEEE Transactions on Components, Packaging and Manufacturing Technology. 1, 1, p. 119-124 6 p., 5682370.

Research output: Contribution to journalArticle