• 3536 Citations
  • 30 h-Index
19952020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

2020

Ductile tearing simulation of STS410 pipe fracture test under load-controlled large-amplitude cyclic loading: Part I—Effect of load ratio

Hwang, J. H., Youn, G. G., Kim, H. T., Kim, Y. J. & Miura, N., 2020 Mar 1, In : Engineering Fracture Mechanics. 226, 106869.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Fracture assessments with elastic follow-up for combined primary and secondary loadings: Part 2: Numerical validation

Lee, H. J., Kim, Y. J., Ainsworth, R. A. & Oh, C. Y., 2020 Feb 1, In : Engineering Fracture Mechanics. 224, 106796.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Fracture assessments with elastic follow-up for combined primary and secondary loadings part 1: Predictive models

Ainsworth, R. A. & Kim, Y. J., 2020 Feb 15, In : Engineering Fracture Mechanics. 225, 106788.

Research output: Contribution to journalArticle

2019

A numerical model to simulate ductile tearing-creep crack growth interaction

Oh, Y. R., Kim, S. J., Kim, Y-J., Ainsworth, R. A. & Nikbin, K., 2019 Aug 1, In : International Journal of Pressure Vessels and Piping. 175, 103920.

Research output: Contribution to journalArticle

Comparison of allowable bending moments for circumferentially flawed pipes in ASME boiler and pressure vessel code section XI nonmandatory appendices C and H

Kim, H. T., Kim, J. S., Seo, J. M., Kim, Y. J., Lee, K. H. & Huh, N. S., 2019 Jan 1, Codes and Standards. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crack growth rate testing and large plate demonstration under chloride-induced stress corrosion cracking conditions in stainless steel canisters for storage of spent nuclear fuel

Lam, P. S., Duncan, A. J., Ward, L. N., Sindelar, R. L., Kim, Y. J., Jeong, J. Y., Lee, H. J. & Lee, M. W., 2019 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Determination of viscoelastic properties of thin pressure sensitive adhesive using dynamic mechanical analysis

Jung, H., Song, H., Lee, M., Kim, Y-J., Youn, S., Lee, K., Shin, J. & Kim, M., 2019 Jan 1, In : Mechanics of Time-Dependent Materials.

Research output: Contribution to journalArticle

Development of an apparatus for chloride induced stress corrosion cracking test using immersion method with constant displacement condition

Jeong, J. Y., Lee, M. W., Kim, Y. J., Sindelar, R. & Duncan, A., 2019 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of neutron irradiation embrittlement on cyclic hardening behavior of core shroud assembly in pressurized water reactor under beyond-design basis earthquake

Kim, J. S., Seo, J. M., Kim, Y. J., Choi, Y. I., Oh, C. S. & Kim, Y. B., 2019 Dec 12, 9th International Conference on Structural Analysis of Advanced Materials, ICSAAM 2019. D'Amore, A. (ed.). American Institute of Physics Inc., 020033. (AIP Conference Proceedings; vol. 2196).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of thermal aging on the deformation and failure behaviors of cast austenitic stainless steels under excessive cyclic loads

Kim, J. W., Kim, S. E. & Kim, Y. J., 2019 Jan 1, Design and Analysis. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering j estimates for spent fuel canisters under combined mechanical and welding residual stresses

Lee, H. J., Kim, Y. J., Lam, P. S. & Sindelar, R. L., 2019 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluations of ductile and cleavage fracture using coupled GTN and Beremin model in API X70 pipelines steel

Jang, Y. Y., Moon, J. H., Huh, N. S., Kim, K. S., Cho, W. Y., Lee, M. W. & Kim, Y. J., 2019 Jan 1, Materials Technology. American Society of Mechanical Engineers (ASME), V004T03A037. (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Instability moment predictions for complex through-wall cracked pipes of low alloy steel

Kim, Y., Oh, Y. J., Kim, Y-J., Kim, J. W. & Park, H. B., 2019 Jan 1, In : International Journal of Pressure Vessels and Piping. 103941.

Research output: Contribution to journalArticle

J–R fracture toughness of cold-worked TP316L stainless steel under seismic loading conditions

Kim, J. W., Choi, M. R. & Kim, Y-J., 2019 Mar 1, In : International Journal of Pressure Vessels and Piping. 171, p. 137-144 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Numerical prediction of notch bluntness effect on fracture resistance of SM490A carbon steel

Youn, G. G., Kim, J. S., Kim, Y. J. & Kamaya, M., 2019 Jan 1, (Accepted/In press) In : Fatigue and Fracture of Engineering Materials and Structures.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Numerical validation of burst pressure estimation equations for steam generator tubes with multiple axial surface cracks

Kim, J. S., Lee, M. W., Kim, Y-J. & Kim, J. W., 2019 Apr 1, In : Nuclear Engineering and Technology. 51, 2, p. 579-587 9 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Plastic Collapse Stresses Based on Flaw Combination Rules for Pipes Containing Two Circumferential Similar Flaws

Hasegawa, K., Li, Y., Kim, Y-J., Lacroix, V. & Strnadel, B., 2019 Jun 1, In : Journal of Pressure Vessel Technology, Transactions of the ASME. 141, 3, 031201.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Pwscc initiation of alloy 600: effect of long-term thermal aging and triaxial stress

Yoo, S. C., Choi, K. J., Kim, S., Kim, J. S., Choi, B-H., Kim, Y-J., Kim, J. S. & Kim, J. H., 2019 Jan 1, Minerals, Metals and Materials Series. Springer International Publishing, p. 281-292 12 p. (Minerals, Metals and Materials Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

SOPHIA: Development of Lagrangian-based CFD code for nuclear thermal-hydraulics and safety applications

Jo, Y. B., Park, S. H., Choi, H. Y., Jung, H. W., Kim, Y-J. & Kim, E. S., 2019 Feb 1, In : Annals of Nuclear Energy. 124, p. 132-149 18 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

The mesh density effect on stress intensity factor calculation using ABAQUS XFEM

Kim, J. S., Lee, H. J., Kim, Y. J. & Kim, Y. B., 2019 Oct 1, In : Journal of Mechanical Science and Technology. 33, 10, p. 4909-4916 8 p.

Research output: Contribution to journalArticle

2018

Applicability of nonlinear kinematic hardening models to low cycle fatigue simulation of C(T) specimen

Kim, H. T., Youn, G. G., Lee, J. M., Kim, Y-J. & Kim, J. W., 2018 Jan 1, Design and Analysis. American Society of Mechanical Engineers (ASME), Vol. 3A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of energy-based damage model to simulate ductile fracture under cyclic loading and validation against piping system test data

Youn, G. G., Nam, H. S., Kim, H. T., Lee, J. M. & Kim, Y-J., 2018 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of the GTN model to ductile crack growth simulation in through-wall cracked pipes

Oh, Y. R., Nam, H. S., Kim, Y-J. & Miura, N., 2018 Jan 1, In : International Journal of Pressure Vessels and Piping. 159, p. 35-44 10 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Comparison between strain-based and energy-based creep failure simulation

Kim, S. J., Oh, Y. R. & Kim, Y-J., 2018 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Comparison of numerical predictions with experimental burst pressures of tubes with multiple surface cracks

Lee, M. W., Kim, J. S., Jeon, J. Y., Kim, Y-J., Kim, J. W. & Kim, J. S., 2018 Jan 1, (Accepted/In press) In : Engineering Fracture Mechanics.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Comparison of various cyclic hardening models for notched C(T) specimen simulation under cyclic loading

Lee, J. M., Kim, H. T., Kim, Y-J. & Kim, J. W., 2018 Jan 1, Design and Analysis. American Society of Mechanical Engineers (ASME), Vol. 3A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Determination of Combined Hardening Parameters to Simulate Deformation Behavior of C(T) Specimen under Cyclic Loading

Ryu, H. W., Kim, H. T., Kim, Y-J. & Kim, J. W., 2018 Jan 1, In : Procedia Structural Integrity. 13, p. 1932-1939 8 p.

Research output: Contribution to journalConference article

Open Access
1 Citation (Scopus)

Development of burst pressure estimation equations for steam generator tubes with multiple axial surface crack

Kim, J. S., Lee, M. W., Kim, J. W. & Kim, Y-J., 2018 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ductile tearing simulation of circumferential cracked pipe under cyclic loading using damage criteria determined by monotonic pipe test data

Hwang, J. H., Miura, N., Youn, G. G. & Kim, Y-J., 2018 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of mesh density in the abaqus XFEM method on stress intensity factors

Kim, J. S., Lee, H. J., Kim, Y-J., Je, J. H. & Kim, Y. B., 2018 Oct 1, In : Transactions of the Korean Society of Mechanical Engineers, A. 42, 10, p. 881-889 9 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Engineering J estimation equations for spent fuel canisters under combined mechanical and welding residual stresses

Lee, H. J., Jeong, J. Y., Kim, Y-J. & Lam, P. S., 2018 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6B-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluation of deformation and fracture behaviors of nuclear components using a simulated specimen under excessive seismic loads

Kim, J. W., Song, I. H., Kweon, H. D., Kim, J. S. & Kim, Y-J., 2018 Jan 1, Design and Analysis. American Society of Mechanical Engineers (ASME), Vol. 3A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Fatigue life evaluation using improved equivalent structural stress incorporating bending residual stress effect

Hwang, J. H., Lee, H. S., Kim, Y-J. & Chung, Y. I., 2018 Nov 1, In : Transactions of the Korean Society of Mechanical Engineers, A. 42, 11, p. 985-992 8 p.

Research output: Contribution to journalArticle

Fatigue service life evaluation of spot-welding specimen with liquid metal embrittlement defects using equivalent structural stress

Song, H. K., Kim, S. J., Lee, H. J., Kim, Y-J., Choi, D. Y. & Uhm, S. H., 2018 Nov 1, In : Transactions of the Korean Society of Mechanical Engineers, A. 42, 11, p. 993-999 7 p.

Research output: Contribution to journalArticle

Fe welding residual stress analysis and validation for spent nuclear fuel canisters

Gim, J. M., Kim, J. S., Kim, Y-J. & Lam, P. S., 2018 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6B-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Heat treatment effects on mechanical properties of Ni–Co alloy thin films

Kim, S. J., Jung, H. W., Lee, M. W., Kim, Y-J., Huh, Y. H. & Park, J. H., 2018 Feb 22, (Accepted/In press) In : Mechanics of Advanced Materials and Structures. p. 1-7 7 p.

Research output: Contribution to journalArticle

Investigation into thermal stress characteristics of pipe-in-pipe under high temperature condition

Jeong, S. H., Won, M. G., Huh, N. S., Kim, Y-J., Oh, Y. J. & Choi, J. B., 2018 Jan 1, Design and Analysis. American Society of Mechanical Engineers (ASME), Vol. 3A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

J-R curve prediction of pre-strained stainless steel 316 material using Fe damage analysis method

Seo, J. M., Kim, J. S. & Kim, Y-J., 2018 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Notch bluntness effects on fracture toughness of a modified S690 steel at 150 °C

Kim, J. S., Larrosa, N. O., Horn, A. J., Kim, Y. J. & Ainsworth, R. A., 2018 Feb 1, In : Engineering Fracture Mechanics. 188, p. 250-267 18 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)
Open Access

Numerical ductile fracture prediction of circumferential through-wall cracked pipes under very low cycle fatigue loading condition

Nam, H. S., Lee, J. M., Kim, Y-J. & Kim, J. W., 2018 Jan 1, (Accepted/In press) In : Engineering Fracture Mechanics.

Research output: Contribution to journalArticle

9 Citations (Scopus)
2 Citations (Scopus)

Numerical Simulation of Thermal Ageing Effect on Fracture Behavior for CF8A Cast Stainless Steels under Very Low Cyclic Loading Conditions

Youn, G. G., Nam, H. S., Kim, Y-J. & Kim, J. W., 2018 Jan 1, In : Procedia Structural Integrity. 13, p. 1297-1304 8 p.

Research output: Contribution to journalConference article

Open Access

Numerical study on longitudinal distance effect on failure stress of non-aligned twin cracked pipe

Nguyen, T. L., Lee, M. W., Hasegawa, K. & Kim, Y-J., 2018 Jan 1, Codes and Standards. American Society of Mechanical Engineers (ASME), Vol. 1A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plastic collapse stresses for pipes with circumferential twin flaws using combination rules

Hasegawa, K., Li, Y., Kim, Y-J., Lacroix, V. & Strnadel, B., 2018 Jan 1, Codes and Standards. American Society of Mechanical Engineers (ASME), Vol. 1A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Progress report on stress intensity factor and J-integral estimation for nuclear fuel canisters under mechanical loading

Kim, J. S., Kim, Y. J., Gim, J. M. & Lam, P. S., 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Proposal of new combination criterion for pipe with circumferential multiple cracks based on ductile failure simulation

Lee, M. W., Hasegawa, K. & Kim, Y-J., 2018 Jan 1, Codes and Standards. American Society of Mechanical Engineers (ASME), Vol. 1A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution