• 3536 Citations
  • 30 h-Index
19952020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Conference contribution
2019

Comparison of allowable bending moments for circumferentially flawed pipes in ASME boiler and pressure vessel code section XI nonmandatory appendices C and H

Kim, H. T., Kim, J. S., Seo, J. M., Kim, Y. J., Lee, K. H. & Huh, N. S., 2019 Jan 1, Codes and Standards. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 1).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Crack growth rate testing and large plate demonstration under chloride-induced stress corrosion cracking conditions in stainless steel canisters for storage of spent nuclear fuel

Lam, P. S., Duncan, A. J., Ward, L. N., Sindelar, R. L., Kim, Y. J., Jeong, J. Y., Lee, H. J. & Lee, M. W., 2019 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of an apparatus for chloride induced stress corrosion cracking test using immersion method with constant displacement condition

Jeong, J. Y., Lee, M. W., Kim, Y. J., Sindelar, R. & Duncan, A., 2019 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of neutron irradiation embrittlement on cyclic hardening behavior of core shroud assembly in pressurized water reactor under beyond-design basis earthquake

Kim, J. S., Seo, J. M., Kim, Y. J., Choi, Y. I., Oh, C. S. & Kim, Y. B., 2019 Dec 12, 9th International Conference on Structural Analysis of Advanced Materials, ICSAAM 2019. D'Amore, A. (ed.). American Institute of Physics Inc., 020033. (AIP Conference Proceedings; vol. 2196).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effect of thermal aging on the deformation and failure behaviors of cast austenitic stainless steels under excessive cyclic loads

Kim, J. W., Kim, S. E. & Kim, Y. J., 2019 Jan 1, Design and Analysis. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 3).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering j estimates for spent fuel canisters under combined mechanical and welding residual stresses

Lee, H. J., Kim, Y. J., Lam, P. S. & Sindelar, R. L., 2019 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2019).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluations of ductile and cleavage fracture using coupled GTN and Beremin model in API X70 pipelines steel

Jang, Y. Y., Moon, J. H., Huh, N. S., Kim, K. S., Cho, W. Y., Lee, M. W. & Kim, Y. J., 2019 Jan 1, Materials Technology. American Society of Mechanical Engineers (ASME), V004T03A037. (Proceedings of the International Conference on Offshore Mechanics and Arctic Engineering - OMAE; vol. 4).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Pwscc initiation of alloy 600: effect of long-term thermal aging and triaxial stress

Yoo, S. C., Choi, K. J., Kim, S., Kim, J. S., Choi, B-H., Kim, Y-J., Kim, J. S. & Kim, J. H., 2019 Jan 1, Minerals, Metals and Materials Series. Springer International Publishing, p. 281-292 12 p. (Minerals, Metals and Materials Series).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2018

Applicability of nonlinear kinematic hardening models to low cycle fatigue simulation of C(T) specimen

Kim, H. T., Youn, G. G., Lee, J. M., Kim, Y-J. & Kim, J. W., 2018 Jan 1, Design and Analysis. American Society of Mechanical Engineers (ASME), Vol. 3A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Application of energy-based damage model to simulate ductile fracture under cyclic loading and validation against piping system test data

Youn, G. G., Nam, H. S., Kim, H. T., Lee, J. M. & Kim, Y-J., 2018 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Comparison between strain-based and energy-based creep failure simulation

Kim, S. J., Oh, Y. R. & Kim, Y-J., 2018 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Comparison of various cyclic hardening models for notched C(T) specimen simulation under cyclic loading

Lee, J. M., Kim, H. T., Kim, Y-J. & Kim, J. W., 2018 Jan 1, Design and Analysis. American Society of Mechanical Engineers (ASME), Vol. 3A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Development of burst pressure estimation equations for steam generator tubes with multiple axial surface crack

Kim, J. S., Lee, M. W., Kim, J. W. & Kim, Y-J., 2018 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ductile tearing simulation of circumferential cracked pipe under cyclic loading using damage criteria determined by monotonic pipe test data

Hwang, J. H., Miura, N., Youn, G. G. & Kim, Y-J., 2018 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Engineering J estimation equations for spent fuel canisters under combined mechanical and welding residual stresses

Lee, H. J., Jeong, J. Y., Kim, Y-J. & Lam, P. S., 2018 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6B-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Evaluation of deformation and fracture behaviors of nuclear components using a simulated specimen under excessive seismic loads

Kim, J. W., Song, I. H., Kweon, H. D., Kim, J. S. & Kim, Y-J., 2018 Jan 1, Design and Analysis. American Society of Mechanical Engineers (ASME), Vol. 3A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Fe welding residual stress analysis and validation for spent nuclear fuel canisters

Gim, J. M., Kim, J. S., Kim, Y-J. & Lam, P. S., 2018 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6B-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Investigation into thermal stress characteristics of pipe-in-pipe under high temperature condition

Jeong, S. H., Won, M. G., Huh, N. S., Kim, Y-J., Oh, Y. J. & Choi, J. B., 2018 Jan 1, Design and Analysis. American Society of Mechanical Engineers (ASME), Vol. 3A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

J-R curve prediction of pre-strained stainless steel 316 material using Fe damage analysis method

Seo, J. M., Kim, J. S. & Kim, Y-J., 2018 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical study on longitudinal distance effect on failure stress of non-aligned twin cracked pipe

Nguyen, T. L., Lee, M. W., Hasegawa, K. & Kim, Y-J., 2018 Jan 1, Codes and Standards. American Society of Mechanical Engineers (ASME), Vol. 1A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Plastic collapse stresses for pipes with circumferential twin flaws using combination rules

Hasegawa, K., Li, Y., Kim, Y-J., Lacroix, V. & Strnadel, B., 2018 Jan 1, Codes and Standards. American Society of Mechanical Engineers (ASME), Vol. 1A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Progress report on stress intensity factor and J-integral estimation for nuclear fuel canisters under mechanical loading

Kim, J. S., Kim, Y. J., Gim, J. M. & Lam, P. S., 2018, Materials and Fabrication. American Society of Mechanical Engineers (ASME), (American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP; vol. 6B-2018).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Proposal of new combination criterion for pipe with circumferential multiple cracks based on ductile failure simulation

Lee, M. W., Hasegawa, K. & Kim, Y-J., 2018 Jan 1, Codes and Standards. American Society of Mechanical Engineers (ASME), Vol. 1A-2018.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

PWSCC initiation of alloy 600: Effect of long-term thermal aging and triaxial stress

Yoo, S. C., Choi, K. J., Kim, S., Kim, J. S., Choi, B-H., Kim, Y-J., Kim, J. S. & Kim, J. H., 2018 Jan 1, Proceedings of the 18th International Conference on Environmental Degradation of Materials in Nuclear Power Systems – Water Reactors. Springer International Publishing, p. 281-292 12 p. (Minerals, Metals and Materials Series; vol. Part F9).

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2017

Benchmark analysis of ductile fracture simulation for circumferentially cracked pipes subjected to bending

Miura, N., Kumagai, T., Kikuchi, M., Takahashi, A., Kim, Y-J., Nagashima, T. & Wada, Y., 2017 Jan 1, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2017.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Fracture behavior of aged CF8A austenite cast stainless steel under dynamic and cyclic loading conditions

Kim, J. W., Choi, M. R. & Kim, Y-J., 2017 Jan 1, Design and Analysis. American Society of Mechanical Engineers (ASME), Vol. 3B-2017.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)
2016

Application of stress-modified fracture strain model to full-scale pipes with a circumferential crack in the center of welds

Ryu, H. W., Jung, H. W., Kim, H. T. & Kim, Y-J., 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Assessment method for complex cracked pipe using equivalent pipe concept

Bae, K. D., Ryu, H. W., Kim, S. J., Nam, H. S. & Kim, Y-J., 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A study of the stress intensity factor and crack opening displacement relationship between uniform thickness pipe bends and non-uniform thickness pipe bends

Bae, K. D., Kim, C. G., Kim, S. J., Lee, H. J. & Kim, Y-J., 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

C(T) estimation of cracked pipe under radial thermal gradient or axial displacement control load

Je, J. H., Kim, Y-J., Lee, K. H. & Oh, Y. R., 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

J-R fracture toughness of nuclear piping materials under excessive seismic loading condition

Kim, J. W., Lee, S. B., Choi, M. R. & Kim, Y-J., 2016, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)
2015

Applicability of net-section collapse load approach to maximum load predictions of multiple circumferential cracked pipes: Numerical study

Lee, M. W., Kim, S. J., Lee, S. D., Jeon, J. Y. & Kim, Y-J., 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2015.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

A Strain Rate Dependent Computational Model of Ductile Damage for C(T) Specimen

Nam, H. S., Jeon, J. Y., Kim, J. S., Kim, J. W. & Kim, Y-J., 2015, Procedia Engineering. Elsevier Ltd, Vol. 130. p. 861-867 7 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Burst pressure prediction of cracked steam generator tube using FE damage analysis

Jeon, J. Y., Kim, Y-J. & Kim, J. W., 2015, High-Pressure Technology; Rudy Scavuzzo Student Paper Competition and 23rd Annual Student Paper Competition; ASME NDE Division. American Society of Mechanical Engineers (ASME), Vol. 5.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Characterization of the effect of notch bluntness on hydrogen embrittlement and fracture behavior using fe analyses

Jeon, J. Y., Larrosa, N. O., Oh, Y. R., Kim, Y-J. & Ainsworth, R. A., 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2015.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Determination of GTN Damage Parameters for Application to Pipe Ductile Fracture Simulation

Oh, Y. R., Kim, J. S. & Kim, Y-J., 2015, Procedia Engineering. Elsevier Ltd, Vol. 130. p. 845-852 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Ductile fracture simulation considering strain rate loading effect

Nam, H. S., Kim, J. S., Kim, Y-J., Kim, J. W. & Oh, C. Y., 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2015.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Effects of side groove on fracture toughness

Ryu, H. W., Kim, H. T., Han, J. J., Kim, Y-J., Kim, J. S., Choi, M. R. & Kim, J. W., 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6B-2015.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Fracture mechanics study on the effects of various notch radii by using FE analysis

Hamid, Z. M. A., Bae, K. H., Youn, G. G., Lee, D. Y., Kim, Y-J. & Kamaya, M., 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6B-2015.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Investigation of Thermal Aging Effect on Fracture Toughness of Cast Stainless Steels Using Experimental and Numerical Approach

Jeon, J. Y., Kim, Y-J., Kim, J. W. & Lee, S. Y., 2015, Procedia Engineering. Elsevier Ltd, Vol. 130. p. 820-827 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

Numerical Analysis to Predict Load-Bearing Capacity of Flawed Steam Generator Tubes in Nuclear Plants

Jeon, J. Y., Kim, J. S., Kim, Y-J., Kim, J. W. & Kim, J. S., 2015, Procedia Engineering. Elsevier Ltd, Vol. 130. p. 1564-1571 8 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Numerical study on fracture behavior of complex cracked pipes

Ryu, H. W., Han, J. J. & Kim, Y-J., 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2015.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Possibility to Estimate Fracture Toughness of Ductile Steel Materials from Small Punch Test Data

Jeon, J. Y., Kim, Y-J., Kim, J. W. & Lee, S. Y., 2015, Procedia Engineering. Elsevier Ltd, Vol. 130. p. 1029-1038 10 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Quantification of Thickness Effects for Circumferential Through-Wall Cracked Pipe Bend with Un-Uniform Thickness under In-Plane Opening Bending

Kim, C. G., Bae, K. D. & Kim, Y-J., 2015, Procedia Engineering. Elsevier Ltd, Vol. 130. p. 1779-1787 9 p.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

STress intensity factors for complex-cracked pipes based on elastic finite element analyses

Jeong, J. U., Choi, J. B., Huh, N. S. & Kim, Y-J., 2015, Materials and Fabrication. American Society of Mechanical Engineers (ASME), Vol. 6A-2015.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2014

A method to quantify thermal aging effect on fracture toughness of cast stainless steels using small punch test

Jeon, J. Y., Ryu, D. I., Kim, Y-J., Lee, M. Y. & Kim, J. W., 2014 Jan 1, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP. American Society of Mechanical Engineers (ASME), Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)

An investigation on multiple axial surface pwscc growth behaviors in primary alloy 600 components using the PWSCC initiation model and damage mechanics approach

Kim, J. S., Heo, E. J., Jeon, J. Y. & Kim, Y-J., 2014 Jan 1, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP. American Society of Mechanical Engineers (ASME), Vol. 6A.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

4 Citations (Scopus)

Constraint effects in ductile fracture on J-resistance curve for full-scale cracked pipes and fracture toughness testing specimens

Han, J. J., Kim, Y-J. & Ainsworth, R. A., 2014 Jan 1, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP. American Society of Mechanical Engineers (ASME), Vol. 5.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

2 Citations (Scopus)

Crack-tip stress field of fully circumferential cracked pipe under combined tension and thermal loads

Je, J. H., Kim, D. J., Bae, K. H. & Kim, Y-J., 2014 Jan 1, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP. American Society of Mechanical Engineers (ASME), Vol. 1.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ductile fracture simulation of criepi STPT 410 pipe with circumferential crack

Nam, H. S., Oh, Y. R., Han, J. J., Oh, C. Y., Kim, Y-J. & Miura, N., 2014 Jan 1, American Society of Mechanical Engineers, Pressure Vessels and Piping Division (Publication) PVP. American Society of Mechanical Engineers (ASME), Vol. 6B.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

1 Citation (Scopus)