• 3536 Citations
  • 30 h-Index
19952020

Research output per year

If you made any changes in Pure these will be visible here soon.

Research Output

Filter
Article
2020

Ductile tearing simulation of STS410 pipe fracture test under load-controlled large-amplitude cyclic loading: Part I—Effect of load ratio

Hwang, J. H., Youn, G. G., Kim, H. T., Kim, Y. J. & Miura, N., 2020 Mar 1, In : Engineering Fracture Mechanics. 226, 106869.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Fracture assessments with elastic follow-up for combined primary and secondary loadings: Part 2: Numerical validation

Lee, H. J., Kim, Y. J., Ainsworth, R. A. & Oh, C. Y., 2020 Feb 1, In : Engineering Fracture Mechanics. 224, 106796.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Fracture assessments with elastic follow-up for combined primary and secondary loadings part 1: Predictive models

Ainsworth, R. A. & Kim, Y. J., 2020 Feb 15, In : Engineering Fracture Mechanics. 225, 106788.

Research output: Contribution to journalArticle

2019

A numerical model to simulate ductile tearing-creep crack growth interaction

Oh, Y. R., Kim, S. J., Kim, Y-J., Ainsworth, R. A. & Nikbin, K., 2019 Aug 1, In : International Journal of Pressure Vessels and Piping. 175, 103920.

Research output: Contribution to journalArticle

Determination of viscoelastic properties of thin pressure sensitive adhesive using dynamic mechanical analysis

Jung, H., Song, H., Lee, M., Kim, Y-J., Youn, S., Lee, K., Shin, J. & Kim, M., 2019 Jan 1, In : Mechanics of Time-Dependent Materials.

Research output: Contribution to journalArticle

Instability moment predictions for complex through-wall cracked pipes of low alloy steel

Kim, Y., Oh, Y. J., Kim, Y-J., Kim, J. W. & Park, H. B., 2019 Jan 1, In : International Journal of Pressure Vessels and Piping. 103941.

Research output: Contribution to journalArticle

J–R fracture toughness of cold-worked TP316L stainless steel under seismic loading conditions

Kim, J. W., Choi, M. R. & Kim, Y-J., 2019 Mar 1, In : International Journal of Pressure Vessels and Piping. 171, p. 137-144 8 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Numerical prediction of notch bluntness effect on fracture resistance of SM490A carbon steel

Youn, G. G., Kim, J. S., Kim, Y. J. & Kamaya, M., 2019 Jan 1, (Accepted/In press) In : Fatigue and Fracture of Engineering Materials and Structures.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Numerical validation of burst pressure estimation equations for steam generator tubes with multiple axial surface cracks

Kim, J. S., Lee, M. W., Kim, Y-J. & Kim, J. W., 2019 Apr 1, In : Nuclear Engineering and Technology. 51, 2, p. 579-587 9 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Plastic Collapse Stresses Based on Flaw Combination Rules for Pipes Containing Two Circumferential Similar Flaws

Hasegawa, K., Li, Y., Kim, Y-J., Lacroix, V. & Strnadel, B., 2019 Jun 1, In : Journal of Pressure Vessel Technology, Transactions of the ASME. 141, 3, 031201.

Research output: Contribution to journalArticle

1 Citation (Scopus)

SOPHIA: Development of Lagrangian-based CFD code for nuclear thermal-hydraulics and safety applications

Jo, Y. B., Park, S. H., Choi, H. Y., Jung, H. W., Kim, Y-J. & Kim, E. S., 2019 Feb 1, In : Annals of Nuclear Energy. 124, p. 132-149 18 p.

Research output: Contribution to journalArticle

3 Citations (Scopus)

The mesh density effect on stress intensity factor calculation using ABAQUS XFEM

Kim, J. S., Lee, H. J., Kim, Y. J. & Kim, Y. B., 2019 Oct 1, In : Journal of Mechanical Science and Technology. 33, 10, p. 4909-4916 8 p.

Research output: Contribution to journalArticle

2018

Application of the GTN model to ductile crack growth simulation in through-wall cracked pipes

Oh, Y. R., Nam, H. S., Kim, Y-J. & Miura, N., 2018 Jan 1, In : International Journal of Pressure Vessels and Piping. 159, p. 35-44 10 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Comparison of numerical predictions with experimental burst pressures of tubes with multiple surface cracks

Lee, M. W., Kim, J. S., Jeon, J. Y., Kim, Y-J., Kim, J. W. & Kim, J. S., 2018 Jan 1, (Accepted/In press) In : Engineering Fracture Mechanics.

Research output: Contribution to journalArticle

3 Citations (Scopus)

Effect of mesh density in the abaqus XFEM method on stress intensity factors

Kim, J. S., Lee, H. J., Kim, Y-J., Je, J. H. & Kim, Y. B., 2018 Oct 1, In : Transactions of the Korean Society of Mechanical Engineers, A. 42, 10, p. 881-889 9 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Fatigue life evaluation using improved equivalent structural stress incorporating bending residual stress effect

Hwang, J. H., Lee, H. S., Kim, Y-J. & Chung, Y. I., 2018 Nov 1, In : Transactions of the Korean Society of Mechanical Engineers, A. 42, 11, p. 985-992 8 p.

Research output: Contribution to journalArticle

Fatigue service life evaluation of spot-welding specimen with liquid metal embrittlement defects using equivalent structural stress

Song, H. K., Kim, S. J., Lee, H. J., Kim, Y-J., Choi, D. Y. & Uhm, S. H., 2018 Nov 1, In : Transactions of the Korean Society of Mechanical Engineers, A. 42, 11, p. 993-999 7 p.

Research output: Contribution to journalArticle

Heat treatment effects on mechanical properties of Ni–Co alloy thin films

Kim, S. J., Jung, H. W., Lee, M. W., Kim, Y-J., Huh, Y. H. & Park, J. H., 2018 Feb 22, (Accepted/In press) In : Mechanics of Advanced Materials and Structures. p. 1-7 7 p.

Research output: Contribution to journalArticle

Notch bluntness effects on fracture toughness of a modified S690 steel at 150 °C

Kim, J. S., Larrosa, N. O., Horn, A. J., Kim, Y. J. & Ainsworth, R. A., 2018 Feb 1, In : Engineering Fracture Mechanics. 188, p. 250-267 18 p.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Numerical ductile fracture prediction of circumferential through-wall cracked pipes under very low cycle fatigue loading condition

Nam, H. S., Lee, J. M., Kim, Y-J. & Kim, J. W., 2018 Jan 1, (Accepted/In press) In : Engineering Fracture Mechanics.

Research output: Contribution to journalArticle

9 Citations (Scopus)
2 Citations (Scopus)

Simulation of ductile fracture toughness test under monotonic and reverse cyclic loading

Nam, H. S., Lee, J. M., Youn, G. G., Kim, Y-J. & Kim, J. W., 2018 Jan 1, In : International Journal of Mechanical Sciences. 135, p. 609-620 12 p.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Transient elastic-plastic-creep crack-tip stress fields under load-controlled loading

Lee, H. S., Kim, D. J., Kim, Y-J., Ainsworth, R. A. & Budden, P. J., 2018 Apr 1, In : Fatigue and Fracture of Engineering Materials and Structures. 41, 4, p. 949-965 17 p.

Research output: Contribution to journalArticle

1 Citation (Scopus)
2017

Analysis of simple creep stress calculation methods for creep life assessment

Seo, J. M., Lee, H. S. & Kim, Y-J., 2017 Aug 1, In : Transactions of the Korean Society of Mechanical Engineers, A. 41, 8, p. 703-709 7 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Applicability of the mα-tangent method to estimate plastic limit loads of elbows and branch junctions

Gim, J. M., Kim, S. H., Bae, K. D., Kim, Y-J. & Kim, J. S., 2017 Jun 1, In : Transactions of the Korean Society of Mechanical Engineers, A. 41, 6, p. 499-505 7 p.

Research output: Contribution to journalArticle

Burst pressure estimation equations for steam generator tubes with multiple axial surface cracks

Lee, M. W., Kim, J. S., Kim, Y-J. & Kim, J. W., 2017 Dec 1, In : International Journal of Pressure Vessels and Piping. 158, p. 59-68 10 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Comparison of Ductile Tearing Simulation with Complex Cracked Pipe Test Data

Bae, K. D., Ryu, H. W., Kim, Y-J. & Kim, J. S., 2017 Feb 1, In : Journal of Pressure Vessel Technology, Transactions of the ASME. 139, 1, 011203.

Research output: Contribution to journalArticle

10 Citations (Scopus)

Energy-based numerical modeling of the strain rate effect on fracture toughness of SA508 Gr. 1a

Nam, H. S., Kim, Y-J., Kim, J. W. & Kim, J. S., 2017 Apr 1, In : Journal of Strain Analysis for Engineering Design. 52, 3, p. 177-189 13 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Engineering Approach Based on Reference Stress Concept for Calculating J and Crack Opening Displacement of Complex-Cracked Pipes

Jeong, J. U., Choi, J. B., Huh, N. S., Shim, D. J. & Kim, Y-J., 2017 Jun 1, In : Journal of Pressure Vessel Technology, Transactions of the ASME. 139, 3, 031206.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Fatigue life evaluation of composite material sleeve using a residual stiffness model

Kim, J. S., Bae, K. D., Lee, C., Kim, Y-J., Kim, W. S. & Kim, I. J., 2017 Jan 21, (Accepted/In press) In : International Journal of Fatigue.

Research output: Contribution to journalArticle

6 Citations (Scopus)

Numerical Study of Laser Shock Peening Effects on Alloy 600 Nozzles with Initial Residual Stresses

Kim, J. S., Nam, H. S., Kim, Y-J. & Kim, J. H., 2017 Aug 1, In : Journal of Pressure Vessel Technology, Transactions of the ASME. 139, 4, 041406.

Research output: Contribution to journalArticle

6 Citations (Scopus)
2016

Application of engineering ductile tearing simulation method to CRIEPI pipe test

Nam, H. S., Oh, Y. R., Kim, Y-J., Kim, J. S. & Miura, N., 2016 Mar 1, In : Engineering Fracture Mechanics. 153, p. 128-142 15 p.

Research output: Contribution to journalArticle

21 Citations (Scopus)

A study of structural stress technique for fracture prediction of an auto-mobile clutch snap-ring

Kim, J. H., Myeong, M. S., Oh, C. S. & Kim, Y-J., 2016 Feb 1, In : Transactions of the Korean Society of Mechanical Engineers, A. 40, 2, p. 175-183 9 p.

Research output: Contribution to journalArticle

Characterization of elastic-plastic-creep crack-tip stress fields under load and displacement control

Kim, D. J., Lee, H. S., Je, J. H., Kim, Y-J., Ainsworth, R. A. & Budden, P. J., 2016 Jan 1, In : Procedia Structural Integrity. 2, p. 832-839 8 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Computational simulation of cold work effect on PWSCC growth in Alloy 600TT steam generator

Jeon, J. Y., Kim, Y-J. & Kim, J. S., 2016 Feb 1, In : Journal of Mechanical Science and Technology. 30, 2, p. 689-696 8 p.

Research output: Contribution to journalArticle

2 Citations (Scopus)

Development of finite element ductile tearing simulation model considering strain rate effect

Nam, H. S., Kim, J. S., Kim, J. W. & Kim, Y-J., 2016 Feb 1, In : Transactions of the Korean Society of Mechanical Engineers, A. 40, 2, p. 167-173 7 p.

Research output: Contribution to journalArticle

Ductile tearing simulation of Battelle pipe test using simplified stress-modified fracture strain concept

Ryu, H. W., Bae, K. D., Kim, Y-J., Han, J. J., Kim, J. S. & Budden, P. J., 2016, (Accepted/In press) In : Fatigue and Fracture of Engineering Materials and Structures.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Effect of Loading Rate on the Fracture Behavior of Nuclear Piping Materials Under Cyclic Loading Conditions

Kim, J. W., Choi, M. R. & Kim, Y-J., 2016 Mar 12, (Accepted/In press) In : Nuclear Engineering and Technology.

Research output: Contribution to journalArticle

12 Citations (Scopus)

Effect of tensile properties on time-dependent C(t) and J(t) integrals in elastic-plastic-creep FE analysis

Lee, S. D., Lee, H. S., Kim, Y-J., Ainsworth, R. A. & Dean, D. W., 2016 Oct 1, In : International Journal of Pressure Vessels and Piping. 146, p. 171-178 8 p.

Research output: Contribution to journalArticle

Extracting ductile fracture toughness from small punch test data using numerical modeling

Jeon, J. Y., Kim, Y-J., Lee, S. Y. & Kim, J. W., 2016, (Accepted/In press) In : International Journal of Pressure Vessels and Piping.

Research output: Contribution to journalArticle

8 Citations (Scopus)

Failure behavior of multiple-axial part-through-wall flaws in alloy 690TT steam generator tubes

Eom, K. H., Kim, J. W., Kim, Y-J. & Kim, J. S., 2016 Apr 1, In : Journal of Pressure Vessel Technology, Transactions of the ASME. 138, 2, 021406.

Research output: Contribution to journalArticle

4 Citations (Scopus)

Finite element analysis of vertical micro-probe considering Joule-heating effect

Jung, H. W., Kim, S. J., Kim, Y-J., Kim, J. Y., Lee, J. Y. & Park, J. H., 2016 Nov 9, (Accepted/In press) In : International Journal of Fatigue.

Research output: Contribution to journalArticle

1 Citation (Scopus)

Finite element simulation of creep crack growth using combined plastic-creep damage model

Kim, D. J., Bae, K. D., Lee, H. S., Kim, Y-J. & Park, G. C., 2016 Jan 1, In : Procedia Structural Integrity. 2, p. 825-831 7 p.

Research output: Contribution to journalArticle

Open Access
1 Citation (Scopus)

Fracture mechanics assessment for different notch sizes using finite element analysis based on ductile failure simulation

Bae, K. H., Jeon, J. Y., Han, J. J., Nam, H. S., Lee, D. Y. & Kim, Y-J., 2016 Aug 1, In : Transactions of the Korean Society of Mechanical Engineers, A. 40, 8, p. 693-701 9 p.

Research output: Contribution to journalArticle

Fully plastic crack opening analyses of complex-cracked pipes for Ramberg-Osgood materials

Jeong, J. U., Choi, J. B., Huh, N. S. & Kim, Y-J., 2016 Apr 1, In : Journal of Mechanical Science and Technology. 30, 4, p. 1563-1572 10 p.

Research output: Contribution to journalArticle

4 Citations (Scopus)