10-315-MHz cascaded hybrid phase-locked loop for pixel clock generation

Minyoung Song, Young Ho Kwak, Sunghoon Ahn, Hojin Park, Chulwoo Kim

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

A cascaded hybrid phase-locked loop (PLL) fabricated in a 65-nm CMOS process consumes 21 mW and occupies 0.4 mm2. An all-digital PLL (ADPLL) with piecewise linear calibrated hierarchical time-to-digital converter is proposed to achieve a wide operation range, and a charge-pump PLL (CPPLL) with an auxiliary (AUX) charge-pump for low current mismatch is cascaded to filter out the ADPLL output noise. The ADPLL achieves low long-term jitter regardless of the leakage current, and the CPPLL realizes low short-term jitter using a self-biased technique and the AUX charge pump. A phase-selectable divider is also proposed to divide the clock frequency while keeping the relative phase difference constant. The measured peak-to-peak short-term and long-term jitters at an output frequency of 315 MHz are 40 and 70p s pp , respectively, with a multiplication factor of 1024.

Original languageEnglish
Article number6380633
Pages (from-to)2080-2093
Number of pages14
JournalIEEE Transactions on Very Large Scale Integration (VLSI) Systems
Volume21
Issue number11
DOIs
Publication statusPublished - 2013 Oct 7

Keywords

  • All-digital phase-locked loop
  • jitter reduction
  • pixel clock generation
  • time-to-digital converter

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Hardware and Architecture
  • Software

Fingerprint Dive into the research topics of '10-315-MHz cascaded hybrid phase-locked loop for pixel clock generation'. Together they form a unique fingerprint.

  • Cite this