A crucial factor affecting the power conversion efficiency of oxide/metal/oxide-based organic photovoltaics: Optical cavity versus transmittance

Byeong Ryong Lee, Gi Eun Park, Yong Woon Kim, Dong Hoon Choi, Tae Geun Kim

Research output: Contribution to journalArticle

Abstract

Considerable effort has been directed at improving the power conversion efficiency of organic photovoltaics, using oxide/metal/oxide multilayers as transparent electrodes, because of their numerous advantages including lower sheet resistance, higher transmittance, and higher flexibility in comparison to typical indium tin oxides. However, to date, most organic photovoltaics based on oxide/metal/oxide electrodes exhibit a lower conversion efficiency than indium tin oxide-based organic photovoltaics, without any clarification. In this investigation, we identify crucial factors that influence the power conversion efficiency of oxide/metal/oxide-based organic photovoltaics to fully exploit the potential of these devices, based on the correlation between the optical cavity and the transmittance. For this purpose, we fabricate five sets of inverted organic photovoltaics using poly({4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl}) and [6,6]-Phenyl C71 butyric acid methyl ester-based active layers and ZnO/Ag/ZnO electrodes with top ZnO layers of varying thicknesses, with reference organic photovoltaics using indium tin oxides, on both rigid and flexible substrates. The highest power conversion efficiency of 8.71% and 7.53% is obtained from single-junction organic photovoltaics with 40/9/8-nm-thick ZnO/Ag/ZnO electrodes on each substrate, due to strong micro-cavity effects between the top and bottom Ag layers, despite the relatively low transmittance of the electrode. This result is supported by the relation between the electric-field intensity and the transmittance curves of the ZnO/Ag/ZnO/solution-based ZnO/active bulk optical stacks based on simulation results. Furthermore, flexible organic photovoltaics with the ZnO/Ag/ZnO electrodes demonstrate much better performance in mechanical bending tests in comparison to the performance of standard indium tin oxide-based organic photovoltaics, and the previously reported oxide/metal/oxide-based organic photovoltaics.

Original languageEnglish
Pages (from-to)1505-1513
Number of pages9
JournalApplied Energy
Volume235
DOIs
Publication statusPublished - 2019 Feb 1

Fingerprint

transmittance
Conversion efficiency
cavity
oxide
indium
electrode
Oxides
Tin oxides
Metals
tin
Indium
Electrodes
substrate
Butyric acid
metal oxide
active layer
Sheet resistance
Bending tests
Substrates
ester

Keywords

  • Building integrated photovoltaics
  • Energy harvesting
  • Micro-cavity effect
  • Wearable photovoltaic device
  • ZnO/Ag/ZnO electrode

ASJC Scopus subject areas

  • Building and Construction
  • Energy(all)
  • Mechanical Engineering
  • Management, Monitoring, Policy and Law

Cite this

A crucial factor affecting the power conversion efficiency of oxide/metal/oxide-based organic photovoltaics : Optical cavity versus transmittance. / Lee, Byeong Ryong; Park, Gi Eun; Kim, Yong Woon; Choi, Dong Hoon; Kim, Tae Geun.

In: Applied Energy, Vol. 235, 01.02.2019, p. 1505-1513.

Research output: Contribution to journalArticle

@article{d1672a49dd3b4b829c9fdd0731ec14d8,
title = "A crucial factor affecting the power conversion efficiency of oxide/metal/oxide-based organic photovoltaics: Optical cavity versus transmittance",
abstract = "Considerable effort has been directed at improving the power conversion efficiency of organic photovoltaics, using oxide/metal/oxide multilayers as transparent electrodes, because of their numerous advantages including lower sheet resistance, higher transmittance, and higher flexibility in comparison to typical indium tin oxides. However, to date, most organic photovoltaics based on oxide/metal/oxide electrodes exhibit a lower conversion efficiency than indium tin oxide-based organic photovoltaics, without any clarification. In this investigation, we identify crucial factors that influence the power conversion efficiency of oxide/metal/oxide-based organic photovoltaics to fully exploit the potential of these devices, based on the correlation between the optical cavity and the transmittance. For this purpose, we fabricate five sets of inverted organic photovoltaics using poly({4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl}) and [6,6]-Phenyl C71 butyric acid methyl ester-based active layers and ZnO/Ag/ZnO electrodes with top ZnO layers of varying thicknesses, with reference organic photovoltaics using indium tin oxides, on both rigid and flexible substrates. The highest power conversion efficiency of 8.71{\%} and 7.53{\%} is obtained from single-junction organic photovoltaics with 40/9/8-nm-thick ZnO/Ag/ZnO electrodes on each substrate, due to strong micro-cavity effects between the top and bottom Ag layers, despite the relatively low transmittance of the electrode. This result is supported by the relation between the electric-field intensity and the transmittance curves of the ZnO/Ag/ZnO/solution-based ZnO/active bulk optical stacks based on simulation results. Furthermore, flexible organic photovoltaics with the ZnO/Ag/ZnO electrodes demonstrate much better performance in mechanical bending tests in comparison to the performance of standard indium tin oxide-based organic photovoltaics, and the previously reported oxide/metal/oxide-based organic photovoltaics.",
keywords = "Building integrated photovoltaics, Energy harvesting, Micro-cavity effect, Wearable photovoltaic device, ZnO/Ag/ZnO electrode",
author = "Lee, {Byeong Ryong} and Park, {Gi Eun} and Kim, {Yong Woon} and Choi, {Dong Hoon} and Kim, {Tae Geun}",
year = "2019",
month = "2",
day = "1",
doi = "10.1016/j.apenergy.2018.11.067",
language = "English",
volume = "235",
pages = "1505--1513",
journal = "Applied Energy",
issn = "0306-2619",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - A crucial factor affecting the power conversion efficiency of oxide/metal/oxide-based organic photovoltaics

T2 - Optical cavity versus transmittance

AU - Lee, Byeong Ryong

AU - Park, Gi Eun

AU - Kim, Yong Woon

AU - Choi, Dong Hoon

AU - Kim, Tae Geun

PY - 2019/2/1

Y1 - 2019/2/1

N2 - Considerable effort has been directed at improving the power conversion efficiency of organic photovoltaics, using oxide/metal/oxide multilayers as transparent electrodes, because of their numerous advantages including lower sheet resistance, higher transmittance, and higher flexibility in comparison to typical indium tin oxides. However, to date, most organic photovoltaics based on oxide/metal/oxide electrodes exhibit a lower conversion efficiency than indium tin oxide-based organic photovoltaics, without any clarification. In this investigation, we identify crucial factors that influence the power conversion efficiency of oxide/metal/oxide-based organic photovoltaics to fully exploit the potential of these devices, based on the correlation between the optical cavity and the transmittance. For this purpose, we fabricate five sets of inverted organic photovoltaics using poly({4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl}) and [6,6]-Phenyl C71 butyric acid methyl ester-based active layers and ZnO/Ag/ZnO electrodes with top ZnO layers of varying thicknesses, with reference organic photovoltaics using indium tin oxides, on both rigid and flexible substrates. The highest power conversion efficiency of 8.71% and 7.53% is obtained from single-junction organic photovoltaics with 40/9/8-nm-thick ZnO/Ag/ZnO electrodes on each substrate, due to strong micro-cavity effects between the top and bottom Ag layers, despite the relatively low transmittance of the electrode. This result is supported by the relation between the electric-field intensity and the transmittance curves of the ZnO/Ag/ZnO/solution-based ZnO/active bulk optical stacks based on simulation results. Furthermore, flexible organic photovoltaics with the ZnO/Ag/ZnO electrodes demonstrate much better performance in mechanical bending tests in comparison to the performance of standard indium tin oxide-based organic photovoltaics, and the previously reported oxide/metal/oxide-based organic photovoltaics.

AB - Considerable effort has been directed at improving the power conversion efficiency of organic photovoltaics, using oxide/metal/oxide multilayers as transparent electrodes, because of their numerous advantages including lower sheet resistance, higher transmittance, and higher flexibility in comparison to typical indium tin oxides. However, to date, most organic photovoltaics based on oxide/metal/oxide electrodes exhibit a lower conversion efficiency than indium tin oxide-based organic photovoltaics, without any clarification. In this investigation, we identify crucial factors that influence the power conversion efficiency of oxide/metal/oxide-based organic photovoltaics to fully exploit the potential of these devices, based on the correlation between the optical cavity and the transmittance. For this purpose, we fabricate five sets of inverted organic photovoltaics using poly({4,8-bis[(2-ethylhexyl)oxy]benzo[1,2-b:4,5-b′]dithiophene-2,6-diyl}{3-fluoro-2-[(2-ethylhexyl)carbonyl]thieno[3,4-b]thiophenediyl}) and [6,6]-Phenyl C71 butyric acid methyl ester-based active layers and ZnO/Ag/ZnO electrodes with top ZnO layers of varying thicknesses, with reference organic photovoltaics using indium tin oxides, on both rigid and flexible substrates. The highest power conversion efficiency of 8.71% and 7.53% is obtained from single-junction organic photovoltaics with 40/9/8-nm-thick ZnO/Ag/ZnO electrodes on each substrate, due to strong micro-cavity effects between the top and bottom Ag layers, despite the relatively low transmittance of the electrode. This result is supported by the relation between the electric-field intensity and the transmittance curves of the ZnO/Ag/ZnO/solution-based ZnO/active bulk optical stacks based on simulation results. Furthermore, flexible organic photovoltaics with the ZnO/Ag/ZnO electrodes demonstrate much better performance in mechanical bending tests in comparison to the performance of standard indium tin oxide-based organic photovoltaics, and the previously reported oxide/metal/oxide-based organic photovoltaics.

KW - Building integrated photovoltaics

KW - Energy harvesting

KW - Micro-cavity effect

KW - Wearable photovoltaic device

KW - ZnO/Ag/ZnO electrode

UR - http://www.scopus.com/inward/record.url?scp=85057110106&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85057110106&partnerID=8YFLogxK

U2 - 10.1016/j.apenergy.2018.11.067

DO - 10.1016/j.apenergy.2018.11.067

M3 - Article

VL - 235

SP - 1505

EP - 1513

JO - Applied Energy

JF - Applied Energy

SN - 0306-2619

ER -