A microstrip phase shifter using ferroelectric electromagnetic bandgap ground plane

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

A microstrip phase shifter using ferroelectric electromagnetic bandgap (EBG) ground plane was proposed. The X-band microstrip phase shifter was designed using lower dielectric substrates with microwave design software. The tunable phase shifter was obtained by changing the inductances or capacitances of the EBG ground plane. The results show that the microstrip phase shifter using a ferroelectric EBG ground plane possesses narrow bandwidth. However, it is easy to integrate to the microstrip circuit and convenient to control the phase delay with an external dc bias.

Original languageEnglish
Title of host publicationIEEE Antennas and Propagation Society, AP-S International Symposium (Digest)
Pages1175-1178
Number of pages4
Volume2
Publication statusPublished - 2004
EventIEEE Antennas and Propagation Society Symposium 2004 Digest held in Conjunction with: USNC/URSI National Radio Science Meeting - Monterey, CA, United States
Duration: 2004 Jun 202004 Jun 25

Other

OtherIEEE Antennas and Propagation Society Symposium 2004 Digest held in Conjunction with: USNC/URSI National Radio Science Meeting
CountryUnited States
CityMonterey, CA
Period04/6/2004/6/25

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Fingerprint Dive into the research topics of 'A microstrip phase shifter using ferroelectric electromagnetic bandgap ground plane'. Together they form a unique fingerprint.

  • Cite this

    Kim, D., Kim, M., & Kim, S-W. (2004). A microstrip phase shifter using ferroelectric electromagnetic bandgap ground plane. In IEEE Antennas and Propagation Society, AP-S International Symposium (Digest) (Vol. 2, pp. 1175-1178)