A new DC offset removal algorithm using an iterative method for real-time simulation

Gilsung Byeon, Seaseung Oh, Gilsoo Jang

Research output: Contribution to journalArticle

13 Citations (Scopus)

Abstract

In this paper, a new dc offset removal algorithm for real-time simulations is proposed. Physically transferred signals in a real-time simulation interface tend to contain a dc offset component for various reasons. This component decreases the accuracy and stability of real-time simulations. The dc offset tends to change according to circumstances which include changes in the system configuration and effects of the external environment which makes the static dc offset removal scheme inefficient. The proposed algorithm can estimate and remove a dc offset component dynamically from the input signal of the hardware under test. In the proposed algorithm, the optimal constant for the condition equation is calculated by using an iterative method and is used to estimate the frequency, time, magnitude, and dc offset component of the input signal. Four sampling points are used to calculate the optimal constant in each step. The proposed algorithm has relatively fast speed and good accuracy in comparison to conventional dc offset removal algorithms. In order to verify the performances of the proposed algorithm, offline and real-time dc offset estimation simulation tests were performed. The results of the simulation tests showed that the proposed algorithm can estimate the dc offset component promptly and exactly and can be applied to real-time simulations.

Original languageEnglish
Article number5771143
Pages (from-to)2277-2286
Number of pages10
JournalIEEE Transactions on Power Delivery
Volume26
Issue number4
DOIs
Publication statusPublished - 2011 Oct 1

Fingerprint

Iterative methods
Sampling
Hardware

Keywords

  • Calibration
  • dc estimation
  • dc offset
  • dc removal
  • iterative method
  • real-time simulation

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Energy Engineering and Power Technology

Cite this

A new DC offset removal algorithm using an iterative method for real-time simulation. / Byeon, Gilsung; Oh, Seaseung; Jang, Gilsoo.

In: IEEE Transactions on Power Delivery, Vol. 26, No. 4, 5771143, 01.10.2011, p. 2277-2286.

Research output: Contribution to journalArticle

@article{26ea6247e3be478aa4cd10f234182138,
title = "A new DC offset removal algorithm using an iterative method for real-time simulation",
abstract = "In this paper, a new dc offset removal algorithm for real-time simulations is proposed. Physically transferred signals in a real-time simulation interface tend to contain a dc offset component for various reasons. This component decreases the accuracy and stability of real-time simulations. The dc offset tends to change according to circumstances which include changes in the system configuration and effects of the external environment which makes the static dc offset removal scheme inefficient. The proposed algorithm can estimate and remove a dc offset component dynamically from the input signal of the hardware under test. In the proposed algorithm, the optimal constant for the condition equation is calculated by using an iterative method and is used to estimate the frequency, time, magnitude, and dc offset component of the input signal. Four sampling points are used to calculate the optimal constant in each step. The proposed algorithm has relatively fast speed and good accuracy in comparison to conventional dc offset removal algorithms. In order to verify the performances of the proposed algorithm, offline and real-time dc offset estimation simulation tests were performed. The results of the simulation tests showed that the proposed algorithm can estimate the dc offset component promptly and exactly and can be applied to real-time simulations.",
keywords = "Calibration, dc estimation, dc offset, dc removal, iterative method, real-time simulation",
author = "Gilsung Byeon and Seaseung Oh and Gilsoo Jang",
year = "2011",
month = "10",
day = "1",
doi = "10.1109/TPWRD.2011.2142405",
language = "English",
volume = "26",
pages = "2277--2286",
journal = "IEEE Transactions on Power Delivery",
issn = "0885-8977",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "4",

}

TY - JOUR

T1 - A new DC offset removal algorithm using an iterative method for real-time simulation

AU - Byeon, Gilsung

AU - Oh, Seaseung

AU - Jang, Gilsoo

PY - 2011/10/1

Y1 - 2011/10/1

N2 - In this paper, a new dc offset removal algorithm for real-time simulations is proposed. Physically transferred signals in a real-time simulation interface tend to contain a dc offset component for various reasons. This component decreases the accuracy and stability of real-time simulations. The dc offset tends to change according to circumstances which include changes in the system configuration and effects of the external environment which makes the static dc offset removal scheme inefficient. The proposed algorithm can estimate and remove a dc offset component dynamically from the input signal of the hardware under test. In the proposed algorithm, the optimal constant for the condition equation is calculated by using an iterative method and is used to estimate the frequency, time, magnitude, and dc offset component of the input signal. Four sampling points are used to calculate the optimal constant in each step. The proposed algorithm has relatively fast speed and good accuracy in comparison to conventional dc offset removal algorithms. In order to verify the performances of the proposed algorithm, offline and real-time dc offset estimation simulation tests were performed. The results of the simulation tests showed that the proposed algorithm can estimate the dc offset component promptly and exactly and can be applied to real-time simulations.

AB - In this paper, a new dc offset removal algorithm for real-time simulations is proposed. Physically transferred signals in a real-time simulation interface tend to contain a dc offset component for various reasons. This component decreases the accuracy and stability of real-time simulations. The dc offset tends to change according to circumstances which include changes in the system configuration and effects of the external environment which makes the static dc offset removal scheme inefficient. The proposed algorithm can estimate and remove a dc offset component dynamically from the input signal of the hardware under test. In the proposed algorithm, the optimal constant for the condition equation is calculated by using an iterative method and is used to estimate the frequency, time, magnitude, and dc offset component of the input signal. Four sampling points are used to calculate the optimal constant in each step. The proposed algorithm has relatively fast speed and good accuracy in comparison to conventional dc offset removal algorithms. In order to verify the performances of the proposed algorithm, offline and real-time dc offset estimation simulation tests were performed. The results of the simulation tests showed that the proposed algorithm can estimate the dc offset component promptly and exactly and can be applied to real-time simulations.

KW - Calibration

KW - dc estimation

KW - dc offset

KW - dc removal

KW - iterative method

KW - real-time simulation

UR - http://www.scopus.com/inward/record.url?scp=80054081809&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80054081809&partnerID=8YFLogxK

U2 - 10.1109/TPWRD.2011.2142405

DO - 10.1109/TPWRD.2011.2142405

M3 - Article

AN - SCOPUS:80054081809

VL - 26

SP - 2277

EP - 2286

JO - IEEE Transactions on Power Delivery

JF - IEEE Transactions on Power Delivery

SN - 0885-8977

IS - 4

M1 - 5771143

ER -