A new deburring tool for intersecting holes

K. H. Kim; N. J. Park

doi:10.1243/095440505X32850

A new deburring tool for intersecting holes

K. H. Kim, N. J. Park

School of Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

9 Citations (Scopus)

Abstract

A new design of deburring tool for intersecting holes is introduced. The deburring cutter is mounted on a slender bar assembled into a cylindrical holder via a pin and a spring. The cutter has been designed to cover wide ranges of exit angle and diameter ratio between intersecting holes. The design is an improvement over the previous ones by the authors. Experiments have been performed on A16061. With the new design, mild exit burrs with exit angles greater than 45° are successfully removed. For large burrs with smaller exit angles, however, the deburring is likely to be incomplete.

Original language	English
Pages (from-to)	865-870
Number of pages	6
Journal	Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture
Volume	219
Issue number	12
DOIs	https://doi.org/10.1243/095440505X32850
Publication status	Published - 2005 Dec

Keywords

Burr
Deburring tool
Exit angle
Intersecting holes

ASJC Scopus subject areas

Mechanical Engineering
Industrial and Manufacturing Engineering

Access to Document

10.1243/095440505X32850

Cite this

@article{055f36f9e5294efca1b0bad00d004771,

title = "A new deburring tool for intersecting holes",

abstract = "A new design of deburring tool for intersecting holes is introduced. The deburring cutter is mounted on a slender bar assembled into a cylindrical holder via a pin and a spring. The cutter has been designed to cover wide ranges of exit angle and diameter ratio between intersecting holes. The design is an improvement over the previous ones by the authors. Experiments have been performed on A16061. With the new design, mild exit burrs with exit angles greater than 45° are successfully removed. For large burrs with smaller exit angles, however, the deburring is likely to be incomplete.",

keywords = "Burr, Deburring tool, Exit angle, Intersecting holes",

author = "Kim, {K. H.} and Park, {N. J.}",

year = "2005",

month = dec,

doi = "10.1243/095440505X32850",

language = "English",

volume = "219",

pages = "865--870",

journal = "Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture",

issn = "0954-4054",

publisher = "SAGE Publications Inc.",

number = "12",

}

TY - JOUR

T1 - A new deburring tool for intersecting holes

AU - Kim, K. H.

AU - Park, N. J.

PY - 2005/12

Y1 - 2005/12

N2 - A new design of deburring tool for intersecting holes is introduced. The deburring cutter is mounted on a slender bar assembled into a cylindrical holder via a pin and a spring. The cutter has been designed to cover wide ranges of exit angle and diameter ratio between intersecting holes. The design is an improvement over the previous ones by the authors. Experiments have been performed on A16061. With the new design, mild exit burrs with exit angles greater than 45° are successfully removed. For large burrs with smaller exit angles, however, the deburring is likely to be incomplete.

AB - A new design of deburring tool for intersecting holes is introduced. The deburring cutter is mounted on a slender bar assembled into a cylindrical holder via a pin and a spring. The cutter has been designed to cover wide ranges of exit angle and diameter ratio between intersecting holes. The design is an improvement over the previous ones by the authors. Experiments have been performed on A16061. With the new design, mild exit burrs with exit angles greater than 45° are successfully removed. For large burrs with smaller exit angles, however, the deburring is likely to be incomplete.

KW - Burr

KW - Deburring tool

KW - Exit angle

KW - Intersecting holes

UR - http://www.scopus.com/inward/record.url?scp=28444486911&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=28444486911&partnerID=8YFLogxK

U2 - 10.1243/095440505X32850

DO - 10.1243/095440505X32850

M3 - Article

AN - SCOPUS:28444486911

SN - 0954-4054

VL - 219

SP - 865

EP - 870

JO - Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

JF - Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture

IS - 12

ER -

A new deburring tool for intersecting holes

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this