A novel interconnect design for thermal management of a commercial-scale planar solid oxide fuel cell stack

Jiyoung Kim, Dong Hwan Kim, Wooseok Lee, Sanghyeok Lee, Jongsup Hong

Research output: Contribution to journalArticlepeer-review

5 Citations (Scopus)

Abstract

Solid oxide fuel cell (SOFC) is a promising technology for stable power supply with high efficiency and high quality heat utilization, but it still faces the technical challenge of low long-term durability caused by thermal imbalance of its stack. An effective, novel thermal management method is urgently required for its market deployment. This study proposes a novel interconnect design for effective thermal management and elucidates the influence of its design variables on internal thermal conditions and heat transfer characteristics of a 1-kW planar SOFC stack. Three-dimensional thermo-fluid simulations are performed on the new stack design employing the novel interconnect and the conventional stack design for comparison. The new design is developed for the purpose of uniform in-plane (horizontal) temperature distribution by modifying the displacement of gas manifolds. At the repeating-unit scale, due to the reduced thermal resistance for horizontal heat transfer of the new stack, its in-plane temperature deviation decreases by 35–60 °C. At the stack scale with 30 unit-cells stacked vertically, the average temperature increases by 30 °C, and the vertical temperature difference decreases by 50 °C. Such thermal fields are the combined results of reduced gaseous convection and enhanced vertical solid-phase conduction through each repeating unit. In the new stack, the amount of heat transferred to the gas within each repeating unit is generally decreased, but is recuperated by increasing solid conduction through metallic interconnects. The relatively weakened gaseous heat transfer of the new design provides more thermal load at the lowest unit of the stack than the reference design, which promotes gas pre-heating prior to reaching the unit-cells and hence results in the elevated stack temperature. Such gas pre-heating also reduces the temperature difference in the vertical direction of the new design. The lower temperature differences both in horizontal and vertical directions enable the new stack to reduce its thermal imbalance and potentially to improve long-term durability.

Original languageEnglish
Article number114682
JournalEnergy Conversion and Management
Volume246
DOIs
Publication statusPublished - 2021 Oct 15
Externally publishedYes

Keywords

  • Heat transfer
  • Interconnect design
  • Numerical simulation
  • Solid oxide fuel cell
  • Thermal management
  • Uniform temperature

ASJC Scopus subject areas

  • Renewable Energy, Sustainability and the Environment
  • Nuclear Energy and Engineering
  • Fuel Technology
  • Energy Engineering and Power Technology

Fingerprint

Dive into the research topics of 'A novel interconnect design for thermal management of a commercial-scale planar solid oxide fuel cell stack'. Together they form a unique fingerprint.

Cite this