A quantitative method to evaluate the performance of topographic correction models used to improve land cover identification

Sung Hwan Park, Hyung Sup Jung, Jaewon Choi, Seong Woo Jeon

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

Topographic correction methods have been widely used prior to land cover identification in sloping terrain because the topographic variation on the Earth's surface can interfere with the classifications. The topographic correction involves the normalization of brightness or surface reflectance values from the slanted to the horizontal plane. Several topographic correction models have been proposed, and a quantitative evaluation method is needed for these models because the performance can vary according to the surface cover types and spectral bands. In this study, we proposed an efficient method to evaluate the performance of topographic correction models through measuring the histogram structural similarity (HSSIM) index estimated from the sunlit and sun-shaded slope areas before and after the correction. We tested the HSSIM index by using three different land cover types derived from Landsat-8 Operational Land Imager (OLI) images and eight commonly used topographic correction models. When the proposed HSSIM index was compared with the visual analysis technique, the results matched exactly. Using the HSSIM index, the best correction methods were then determined, and the best ones included the statistical-empirical or SCS+C methods (where SCS+C refers to the sun-canopy-sensor plus C-correction) for the R, G, and B bands and the Minnaert+SCS method for the NIR, SWIR-1, and SWIR-2 bands. These results indicate that (i) the HSSIM index enables quantitative performance evaluations of topographic correction models and (ii) the HSSIM index can be used to determine the best topographic correction method for particular land cover identification applications.

Original languageEnglish
Pages (from-to)1488-1503
Number of pages16
JournalAdvances in Space Research
Volume60
Issue number7
DOIs
Publication statusPublished - 2017 Oct 1

Fingerprint

Identification (control systems)
land cover
similarity index
histogram
histograms
Sun
Image sensors
Luminance
sun
Earth (planet)
method
visual analysis
canopies
surface reflectance
evaluation
Sensors
Earth surface
spectral bands
Landsat
brightness

Keywords

  • Land cover identification
  • Performance assessment
  • Topographic correction models

ASJC Scopus subject areas

  • Aerospace Engineering
  • Space and Planetary Science

Cite this

A quantitative method to evaluate the performance of topographic correction models used to improve land cover identification. / Park, Sung Hwan; Jung, Hyung Sup; Choi, Jaewon; Jeon, Seong Woo.

In: Advances in Space Research, Vol. 60, No. 7, 01.10.2017, p. 1488-1503.

Research output: Contribution to journalArticle

@article{d5c86973924140619a30497508c3d1a7,
title = "A quantitative method to evaluate the performance of topographic correction models used to improve land cover identification",
abstract = "Topographic correction methods have been widely used prior to land cover identification in sloping terrain because the topographic variation on the Earth's surface can interfere with the classifications. The topographic correction involves the normalization of brightness or surface reflectance values from the slanted to the horizontal plane. Several topographic correction models have been proposed, and a quantitative evaluation method is needed for these models because the performance can vary according to the surface cover types and spectral bands. In this study, we proposed an efficient method to evaluate the performance of topographic correction models through measuring the histogram structural similarity (HSSIM) index estimated from the sunlit and sun-shaded slope areas before and after the correction. We tested the HSSIM index by using three different land cover types derived from Landsat-8 Operational Land Imager (OLI) images and eight commonly used topographic correction models. When the proposed HSSIM index was compared with the visual analysis technique, the results matched exactly. Using the HSSIM index, the best correction methods were then determined, and the best ones included the statistical-empirical or SCS+C methods (where SCS+C refers to the sun-canopy-sensor plus C-correction) for the R, G, and B bands and the Minnaert+SCS method for the NIR, SWIR-1, and SWIR-2 bands. These results indicate that (i) the HSSIM index enables quantitative performance evaluations of topographic correction models and (ii) the HSSIM index can be used to determine the best topographic correction method for particular land cover identification applications.",
keywords = "Land cover identification, Performance assessment, Topographic correction models",
author = "Park, {Sung Hwan} and Jung, {Hyung Sup} and Jaewon Choi and Jeon, {Seong Woo}",
year = "2017",
month = "10",
day = "1",
doi = "10.1016/j.asr.2017.06.054",
language = "English",
volume = "60",
pages = "1488--1503",
journal = "Advances in Space Research",
issn = "0273-1177",
publisher = "Elsevier Limited",
number = "7",

}

TY - JOUR

T1 - A quantitative method to evaluate the performance of topographic correction models used to improve land cover identification

AU - Park, Sung Hwan

AU - Jung, Hyung Sup

AU - Choi, Jaewon

AU - Jeon, Seong Woo

PY - 2017/10/1

Y1 - 2017/10/1

N2 - Topographic correction methods have been widely used prior to land cover identification in sloping terrain because the topographic variation on the Earth's surface can interfere with the classifications. The topographic correction involves the normalization of brightness or surface reflectance values from the slanted to the horizontal plane. Several topographic correction models have been proposed, and a quantitative evaluation method is needed for these models because the performance can vary according to the surface cover types and spectral bands. In this study, we proposed an efficient method to evaluate the performance of topographic correction models through measuring the histogram structural similarity (HSSIM) index estimated from the sunlit and sun-shaded slope areas before and after the correction. We tested the HSSIM index by using three different land cover types derived from Landsat-8 Operational Land Imager (OLI) images and eight commonly used topographic correction models. When the proposed HSSIM index was compared with the visual analysis technique, the results matched exactly. Using the HSSIM index, the best correction methods were then determined, and the best ones included the statistical-empirical or SCS+C methods (where SCS+C refers to the sun-canopy-sensor plus C-correction) for the R, G, and B bands and the Minnaert+SCS method for the NIR, SWIR-1, and SWIR-2 bands. These results indicate that (i) the HSSIM index enables quantitative performance evaluations of topographic correction models and (ii) the HSSIM index can be used to determine the best topographic correction method for particular land cover identification applications.

AB - Topographic correction methods have been widely used prior to land cover identification in sloping terrain because the topographic variation on the Earth's surface can interfere with the classifications. The topographic correction involves the normalization of brightness or surface reflectance values from the slanted to the horizontal plane. Several topographic correction models have been proposed, and a quantitative evaluation method is needed for these models because the performance can vary according to the surface cover types and spectral bands. In this study, we proposed an efficient method to evaluate the performance of topographic correction models through measuring the histogram structural similarity (HSSIM) index estimated from the sunlit and sun-shaded slope areas before and after the correction. We tested the HSSIM index by using three different land cover types derived from Landsat-8 Operational Land Imager (OLI) images and eight commonly used topographic correction models. When the proposed HSSIM index was compared with the visual analysis technique, the results matched exactly. Using the HSSIM index, the best correction methods were then determined, and the best ones included the statistical-empirical or SCS+C methods (where SCS+C refers to the sun-canopy-sensor plus C-correction) for the R, G, and B bands and the Minnaert+SCS method for the NIR, SWIR-1, and SWIR-2 bands. These results indicate that (i) the HSSIM index enables quantitative performance evaluations of topographic correction models and (ii) the HSSIM index can be used to determine the best topographic correction method for particular land cover identification applications.

KW - Land cover identification

KW - Performance assessment

KW - Topographic correction models

UR - http://www.scopus.com/inward/record.url?scp=85026266346&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85026266346&partnerID=8YFLogxK

U2 - 10.1016/j.asr.2017.06.054

DO - 10.1016/j.asr.2017.06.054

M3 - Article

AN - SCOPUS:85026266346

VL - 60

SP - 1488

EP - 1503

JO - Advances in Space Research

JF - Advances in Space Research

SN - 0273-1177

IS - 7

ER -