AEX: A DFA analysis and advisor system

Jeonghyun Kim, George A. Bekey

Research output: Chapter in Book/Report/Conference proceedingConference contribution

3 Citations (Scopus)

Abstract

The concept of designing products for low cost and easy assembly operations is explained. The general system architecture and methodology of assembly expert (AEX), knowledge-based software under development that will assist the designer optimize product design with respect to low cost and easy assembly, are described. AEX is intended as a subsystem of a general CAD system, rather than a substitute for it. Results for the prototype system and the current status of the full-scale development of AEX are reported. The prototype shows that AEX is cleanly hierarchical and easily expandable, due to the hierarchical nature of the GT code part representation used.

Original languageEnglish
Title of host publicationProceedings of the IEEE International Conference on Systems, Man and Cybernetics
Place of PublicationPiscataway, NJ, United States
PublisherPubl by IEEE
Pages563-565
Number of pages3
ISBN (Print)0879425970
Publication statusPublished - 1990 Nov 1
Externally publishedYes
Event1990 IEEE International Conference on Systems, Man, and Cybernetics - Los Angeles, CA, USA
Duration: 1990 Nov 41990 Nov 7

Other

Other1990 IEEE International Conference on Systems, Man, and Cybernetics
CityLos Angeles, CA, USA
Period90/11/490/11/7

Fingerprint

Product design
Costs
Computer aided design

ASJC Scopus subject areas

  • Hardware and Architecture
  • Control and Systems Engineering

Cite this

Kim, J., & Bekey, G. A. (1990). AEX: A DFA analysis and advisor system. In Proceedings of the IEEE International Conference on Systems, Man and Cybernetics (pp. 563-565). Piscataway, NJ, United States: Publ by IEEE.

AEX : A DFA analysis and advisor system. / Kim, Jeonghyun; Bekey, George A.

Proceedings of the IEEE International Conference on Systems, Man and Cybernetics. Piscataway, NJ, United States : Publ by IEEE, 1990. p. 563-565.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Kim, J & Bekey, GA 1990, AEX: A DFA analysis and advisor system. in Proceedings of the IEEE International Conference on Systems, Man and Cybernetics. Publ by IEEE, Piscataway, NJ, United States, pp. 563-565, 1990 IEEE International Conference on Systems, Man, and Cybernetics, Los Angeles, CA, USA, 90/11/4.
Kim J, Bekey GA. AEX: A DFA analysis and advisor system. In Proceedings of the IEEE International Conference on Systems, Man and Cybernetics. Piscataway, NJ, United States: Publ by IEEE. 1990. p. 563-565
Kim, Jeonghyun ; Bekey, George A. / AEX : A DFA analysis and advisor system. Proceedings of the IEEE International Conference on Systems, Man and Cybernetics. Piscataway, NJ, United States : Publ by IEEE, 1990. pp. 563-565
@inproceedings{f8e0a69cbc6547b88a9f089f212d298d,
title = "AEX: A DFA analysis and advisor system",
abstract = "The concept of designing products for low cost and easy assembly operations is explained. The general system architecture and methodology of assembly expert (AEX), knowledge-based software under development that will assist the designer optimize product design with respect to low cost and easy assembly, are described. AEX is intended as a subsystem of a general CAD system, rather than a substitute for it. Results for the prototype system and the current status of the full-scale development of AEX are reported. The prototype shows that AEX is cleanly hierarchical and easily expandable, due to the hierarchical nature of the GT code part representation used.",
author = "Jeonghyun Kim and Bekey, {George A.}",
year = "1990",
month = "11",
day = "1",
language = "English",
isbn = "0879425970",
pages = "563--565",
booktitle = "Proceedings of the IEEE International Conference on Systems, Man and Cybernetics",
publisher = "Publ by IEEE",

}

TY - GEN

T1 - AEX

T2 - A DFA analysis and advisor system

AU - Kim, Jeonghyun

AU - Bekey, George A.

PY - 1990/11/1

Y1 - 1990/11/1

N2 - The concept of designing products for low cost and easy assembly operations is explained. The general system architecture and methodology of assembly expert (AEX), knowledge-based software under development that will assist the designer optimize product design with respect to low cost and easy assembly, are described. AEX is intended as a subsystem of a general CAD system, rather than a substitute for it. Results for the prototype system and the current status of the full-scale development of AEX are reported. The prototype shows that AEX is cleanly hierarchical and easily expandable, due to the hierarchical nature of the GT code part representation used.

AB - The concept of designing products for low cost and easy assembly operations is explained. The general system architecture and methodology of assembly expert (AEX), knowledge-based software under development that will assist the designer optimize product design with respect to low cost and easy assembly, are described. AEX is intended as a subsystem of a general CAD system, rather than a substitute for it. Results for the prototype system and the current status of the full-scale development of AEX are reported. The prototype shows that AEX is cleanly hierarchical and easily expandable, due to the hierarchical nature of the GT code part representation used.

UR - http://www.scopus.com/inward/record.url?scp=0025514781&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=0025514781&partnerID=8YFLogxK

M3 - Conference contribution

AN - SCOPUS:0025514781

SN - 0879425970

SP - 563

EP - 565

BT - Proceedings of the IEEE International Conference on Systems, Man and Cybernetics

PB - Publ by IEEE

CY - Piscataway, NJ, United States

ER -