Ammonia-water bubble absorber with a plate heat exchanger

Yong Tae Kang, Takao Kashiwagi, Richard N. Christensen

Research output: Contribution to journalConference article

59 Citations (Scopus)

Abstract

The objectives of this paper are to develop a design model for a bubble absorber with plate heat exchangers and to evaluate the heat and mass transfer resistances within both liquid and bubble. Parametric analysis was performed to find optimum design conditions for the bubble absorber. An offset strip fin (OSF) is used to enhance heat transfer performance in the coolant region of a standard plate heat exchanger. It was found that the heat transfer resistance was dominant in the vapor region, while the mass transfer resistance was dominant in the liquid region. The mass transfer area was found to have more significant effect on the size of the bubble absorber than the heat transfer area. The direction of mass transfer was confirmed in the simulation of the countercurrent bubble absorber. The present design model predicts the water desorption process up to the length of 12.5 cm from the bottom of the bubble absorber. All geometric variables could be selected optimally for given thermal conditions by the design model developed in this paper. This is a significant contribution in designing the ammonia-water bubble absorber.

Original languageEnglish
Pages (from-to)1565-1575
Number of pages11
JournalASHRAE Transactions
Volume104
Issue numberPt 1B
Publication statusPublished - 1998
EventProceedings of the 1998 ASHRAE Winter Meeting. Part 1 (of 2) - San Francisco, CA, USA
Duration: 1998 Jan 181998 Jan 21

ASJC Scopus subject areas

  • Building and Construction
  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Ammonia-water bubble absorber with a plate heat exchanger'. Together they form a unique fingerprint.

  • Cite this

    Kang, Y. T., Kashiwagi, T., & Christensen, R. N. (1998). Ammonia-water bubble absorber with a plate heat exchanger. ASHRAE Transactions, 104(Pt 1B), 1565-1575.