Analysis of a sliding mechanism using spiral springs in mobile products

Yoonju Choe, Sangbaek Park, Soo Won Chae, Bong Kuk Hong, Sungwoo Choi

Research output: Contribution to journalArticle

Abstract

Spiral springs are widely used in sliding mechanisms because they can store a large amount of elastic energy within a limited space. In mobile products, spiral springs behave in a non-linear fashion. Due to the lack of appropriate analysis methods, spiral springs are currently designed based on experience. Unfortunately, spiral springs can become damaged within a warranty period, indicating that the design strategy needs improvement. Existing analysis methods are limited by excessive simplification or they do not consider the full range of the sliding mechanism. In an effort to identify the causes of spiral spring failure in sliding mechanisms and to establish design guidelines for spiral springs, we developed a finite element procedure for analyzing full sliding mechanisms. The proposed analysis method was verified by comparing the simulated finite element results with those of actual experiments. The simulation results show that the regions of a spiral spring that experience the maximum stress are the same regions in the spring that become damaged during use. The predicted reaction force curves of a spiral spring experienced during operation resemble those measured experimentally. The proposed analysis method is useful for designing spiral springs, with particular consideration for the initial angle of a spiral spring in the sliding mechanism and the cross-sectional thickness and width of the spring itself. The modeling and analysis method used to mimic the spiral spring-based sliding mechanism permits the design of thinner sliding mechanisms with thinner spiral springs. This design may be suitable for use in mobile products.

Original languageEnglish
Pages (from-to)1765-1771
Number of pages7
JournalInternational Journal of Precision Engineering and Manufacturing
Volume13
Issue number10
DOIs
Publication statusPublished - 2012 Oct 1

Fingerprint

Experiments

Keywords

  • Finite element analysis
  • Mobile products
  • Sliding mechanism
  • Spiral spring
  • Spring hinge

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Industrial and Manufacturing Engineering
  • Mechanical Engineering

Cite this

Analysis of a sliding mechanism using spiral springs in mobile products. / Choe, Yoonju; Park, Sangbaek; Chae, Soo Won; Hong, Bong Kuk; Choi, Sungwoo.

In: International Journal of Precision Engineering and Manufacturing, Vol. 13, No. 10, 01.10.2012, p. 1765-1771.

Research output: Contribution to journalArticle

Choe, Yoonju ; Park, Sangbaek ; Chae, Soo Won ; Hong, Bong Kuk ; Choi, Sungwoo. / Analysis of a sliding mechanism using spiral springs in mobile products. In: International Journal of Precision Engineering and Manufacturing. 2012 ; Vol. 13, No. 10. pp. 1765-1771.
@article{7f4d2323ae444ad0b12a673b70929391,
title = "Analysis of a sliding mechanism using spiral springs in mobile products",
abstract = "Spiral springs are widely used in sliding mechanisms because they can store a large amount of elastic energy within a limited space. In mobile products, spiral springs behave in a non-linear fashion. Due to the lack of appropriate analysis methods, spiral springs are currently designed based on experience. Unfortunately, spiral springs can become damaged within a warranty period, indicating that the design strategy needs improvement. Existing analysis methods are limited by excessive simplification or they do not consider the full range of the sliding mechanism. In an effort to identify the causes of spiral spring failure in sliding mechanisms and to establish design guidelines for spiral springs, we developed a finite element procedure for analyzing full sliding mechanisms. The proposed analysis method was verified by comparing the simulated finite element results with those of actual experiments. The simulation results show that the regions of a spiral spring that experience the maximum stress are the same regions in the spring that become damaged during use. The predicted reaction force curves of a spiral spring experienced during operation resemble those measured experimentally. The proposed analysis method is useful for designing spiral springs, with particular consideration for the initial angle of a spiral spring in the sliding mechanism and the cross-sectional thickness and width of the spring itself. The modeling and analysis method used to mimic the spiral spring-based sliding mechanism permits the design of thinner sliding mechanisms with thinner spiral springs. This design may be suitable for use in mobile products.",
keywords = "Finite element analysis, Mobile products, Sliding mechanism, Spiral spring, Spring hinge",
author = "Yoonju Choe and Sangbaek Park and Chae, {Soo Won} and Hong, {Bong Kuk} and Sungwoo Choi",
year = "2012",
month = "10",
day = "1",
doi = "10.1007/s12541-012-0232-y",
language = "English",
volume = "13",
pages = "1765--1771",
journal = "International Journal of Precision Engineering and Manufacturing",
issn = "1229-8557",
publisher = "Korean Society of Precision Engineering",
number = "10",

}

TY - JOUR

T1 - Analysis of a sliding mechanism using spiral springs in mobile products

AU - Choe, Yoonju

AU - Park, Sangbaek

AU - Chae, Soo Won

AU - Hong, Bong Kuk

AU - Choi, Sungwoo

PY - 2012/10/1

Y1 - 2012/10/1

N2 - Spiral springs are widely used in sliding mechanisms because they can store a large amount of elastic energy within a limited space. In mobile products, spiral springs behave in a non-linear fashion. Due to the lack of appropriate analysis methods, spiral springs are currently designed based on experience. Unfortunately, spiral springs can become damaged within a warranty period, indicating that the design strategy needs improvement. Existing analysis methods are limited by excessive simplification or they do not consider the full range of the sliding mechanism. In an effort to identify the causes of spiral spring failure in sliding mechanisms and to establish design guidelines for spiral springs, we developed a finite element procedure for analyzing full sliding mechanisms. The proposed analysis method was verified by comparing the simulated finite element results with those of actual experiments. The simulation results show that the regions of a spiral spring that experience the maximum stress are the same regions in the spring that become damaged during use. The predicted reaction force curves of a spiral spring experienced during operation resemble those measured experimentally. The proposed analysis method is useful for designing spiral springs, with particular consideration for the initial angle of a spiral spring in the sliding mechanism and the cross-sectional thickness and width of the spring itself. The modeling and analysis method used to mimic the spiral spring-based sliding mechanism permits the design of thinner sliding mechanisms with thinner spiral springs. This design may be suitable for use in mobile products.

AB - Spiral springs are widely used in sliding mechanisms because they can store a large amount of elastic energy within a limited space. In mobile products, spiral springs behave in a non-linear fashion. Due to the lack of appropriate analysis methods, spiral springs are currently designed based on experience. Unfortunately, spiral springs can become damaged within a warranty period, indicating that the design strategy needs improvement. Existing analysis methods are limited by excessive simplification or they do not consider the full range of the sliding mechanism. In an effort to identify the causes of spiral spring failure in sliding mechanisms and to establish design guidelines for spiral springs, we developed a finite element procedure for analyzing full sliding mechanisms. The proposed analysis method was verified by comparing the simulated finite element results with those of actual experiments. The simulation results show that the regions of a spiral spring that experience the maximum stress are the same regions in the spring that become damaged during use. The predicted reaction force curves of a spiral spring experienced during operation resemble those measured experimentally. The proposed analysis method is useful for designing spiral springs, with particular consideration for the initial angle of a spiral spring in the sliding mechanism and the cross-sectional thickness and width of the spring itself. The modeling and analysis method used to mimic the spiral spring-based sliding mechanism permits the design of thinner sliding mechanisms with thinner spiral springs. This design may be suitable for use in mobile products.

KW - Finite element analysis

KW - Mobile products

KW - Sliding mechanism

KW - Spiral spring

KW - Spring hinge

UR - http://www.scopus.com/inward/record.url?scp=84870527608&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84870527608&partnerID=8YFLogxK

U2 - 10.1007/s12541-012-0232-y

DO - 10.1007/s12541-012-0232-y

M3 - Article

VL - 13

SP - 1765

EP - 1771

JO - International Journal of Precision Engineering and Manufacturing

JF - International Journal of Precision Engineering and Manufacturing

SN - 1229-8557

IS - 10

ER -