Abstract
Experimental results of cyclic reversed lateral force test on a two-story reinforced concrete shear wall sub-assemblage are simulated analytically by using the PERFORM-3D program. A comparison of experimental and analytical results leads to the following conclusions: (1) "Shear Wall" and "General Wall" models with "Concrete shear" cannot simulate the pinching phenomena due to shear and show larger amounts of inelastic energy absorption than those in the experiment. (2) Modeling a story-height wall by using two or more "General Wall" elements with "Diagonal shear" in the vertical direction induces the phenomenon of swelling-out at the belly, leading to the erroneous simulation of shear behaviors. In application to tall building structures, it is recommended to use one element of "General Wall" with "Diagonal shear" for the full height of a story. (3) In the plastic hinge area, concrete deformations of analytical models overestimate elongation and underestimate shortening when compared with experimental results.
Original language | English |
---|---|
Pages (from-to) | 173-196 |
Number of pages | 24 |
Journal | Computers and Concrete |
Volume | 10 |
Issue number | 2 |
DOIs | |
Publication status | Published - 2012 Aug |
Keywords
- Nonlinear analysis
- PERFORM-3D
- Reinforced concrete
- Wall sub-assemblage
ASJC Scopus subject areas
- Computational Mechanics