Applicability of nonlinear kinematic hardening models to low cycle fatigue simulation of C(T) specimen

Hune Tae Kim, Gyo Geun Youn, Jong Min Lee, Yun-Jae Kim, Jin Weon Kim

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

To perform low cycle fatigue analysis on nuclear structural materials under cyclic loading, cyclic hardening rules should be determined. In this study, the determination of linear and nonlinear kinematic hardening model parameters based on limited material test data is proposed. Chaboche model parameters are determined from hysteresis loops for the purpose of comparison. Simulation of cyclic C(T) test is performed using the hardening models. In cyclic C(T) test, SA508 Gr.1a low alloy steel and SA312 TP316L stainless steel were taken and incremental loading sequence was adopted. In the loading sequence, displacement control was used for loading steps and load control was applied for unloading steps to maintain constant load ratio. A constant displacement increment was applied after each cycle. The simulation results using A&F model and Chaboche model are compared to verify the applicability of A&F model.

Original languageEnglish
Title of host publicationDesign and Analysis
PublisherAmerican Society of Mechanical Engineers (ASME)
Volume3A
ISBN (Electronic)9780791851623
DOIs
Publication statusPublished - 2018 Jan 1
EventASME 2018 Pressure Vessels and Piping Conference, PVP 2018 - Prague, Czech Republic
Duration: 2018 Jul 152018 Jul 20

Other

OtherASME 2018 Pressure Vessels and Piping Conference, PVP 2018
CountryCzech Republic
CityPrague
Period18/7/1518/7/20

ASJC Scopus subject areas

  • Mechanical Engineering

Fingerprint Dive into the research topics of 'Applicability of nonlinear kinematic hardening models to low cycle fatigue simulation of C(T) specimen'. Together they form a unique fingerprint.

Cite this