Application of stress-modified fracture strain model to full-scale pipes with a circumferential crack in the center of welds

Ho Wan Ryu, Hyun Woo Jung, Hune Tae Kim, Yun-Jae Kim

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

A lot of welded joints are required to connect the junctions of components in the complex piping system. The structural integrity assessment on welded pipes is especially important, because the weldments are susceptible to material discontinuities, flaws and residual stresses. Finite element (FE) damage analysis can be useful and effective method for an accurate assessment on extensive structures. For the case of welded joint, the numerical method is necessarily required to assess complex features because of material discontinuities and flaws. This study provides a simple numerical method to simulate ductile tearing in welded full-scale pipes. Stressmodified fracture strain model is applied to finite element analysis with a stress reduction technique. An element-sizedependent critical damage model is also implemented in the fullscale pipe simulations. From the results of simulation, deformation response and characteristic loads are compared with experimentally measured values to verify the application of damage model on weld material. As a result, the predictions of finite element damage analysis are in good agreement with experiments.

Original languageEnglish
Title of host publicationMaterials and Fabrication
PublisherAmerican Society of Mechanical Engineers (ASME)
Volume6A-2016
ISBN (Electronic)9780791850428
DOIs
Publication statusPublished - 2016
EventASME 2016 Pressure Vessels and Piping Conference, PVP 2016 - Vancouver, Canada
Duration: 2016 Jul 172016 Jul 21

Other

OtherASME 2016 Pressure Vessels and Piping Conference, PVP 2016
CountryCanada
CityVancouver
Period16/7/1716/7/21

Fingerprint

Welds
Pipe
Cracks
Numerical methods
Defects
Piping systems
Structural integrity
Residual stresses
Finite element method
Experiments

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Ryu, H. W., Jung, H. W., Kim, H. T., & Kim, Y-J. (2016). Application of stress-modified fracture strain model to full-scale pipes with a circumferential crack in the center of welds. In Materials and Fabrication (Vol. 6A-2016). American Society of Mechanical Engineers (ASME). https://doi.org/10.1115/PVP2016-63546

Application of stress-modified fracture strain model to full-scale pipes with a circumferential crack in the center of welds. / Ryu, Ho Wan; Jung, Hyun Woo; Kim, Hune Tae; Kim, Yun-Jae.

Materials and Fabrication. Vol. 6A-2016 American Society of Mechanical Engineers (ASME), 2016.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Ryu, HW, Jung, HW, Kim, HT & Kim, Y-J 2016, Application of stress-modified fracture strain model to full-scale pipes with a circumferential crack in the center of welds. in Materials and Fabrication. vol. 6A-2016, American Society of Mechanical Engineers (ASME), ASME 2016 Pressure Vessels and Piping Conference, PVP 2016, Vancouver, Canada, 16/7/17. https://doi.org/10.1115/PVP2016-63546
Ryu HW, Jung HW, Kim HT, Kim Y-J. Application of stress-modified fracture strain model to full-scale pipes with a circumferential crack in the center of welds. In Materials and Fabrication. Vol. 6A-2016. American Society of Mechanical Engineers (ASME). 2016 https://doi.org/10.1115/PVP2016-63546
Ryu, Ho Wan ; Jung, Hyun Woo ; Kim, Hune Tae ; Kim, Yun-Jae. / Application of stress-modified fracture strain model to full-scale pipes with a circumferential crack in the center of welds. Materials and Fabrication. Vol. 6A-2016 American Society of Mechanical Engineers (ASME), 2016.
@inproceedings{f4422512070b41f9a26c68646a6e2d9b,
title = "Application of stress-modified fracture strain model to full-scale pipes with a circumferential crack in the center of welds",
abstract = "A lot of welded joints are required to connect the junctions of components in the complex piping system. The structural integrity assessment on welded pipes is especially important, because the weldments are susceptible to material discontinuities, flaws and residual stresses. Finite element (FE) damage analysis can be useful and effective method for an accurate assessment on extensive structures. For the case of welded joint, the numerical method is necessarily required to assess complex features because of material discontinuities and flaws. This study provides a simple numerical method to simulate ductile tearing in welded full-scale pipes. Stressmodified fracture strain model is applied to finite element analysis with a stress reduction technique. An element-sizedependent critical damage model is also implemented in the fullscale pipe simulations. From the results of simulation, deformation response and characteristic loads are compared with experimentally measured values to verify the application of damage model on weld material. As a result, the predictions of finite element damage analysis are in good agreement with experiments.",
author = "Ryu, {Ho Wan} and Jung, {Hyun Woo} and Kim, {Hune Tae} and Yun-Jae Kim",
year = "2016",
doi = "10.1115/PVP2016-63546",
language = "English",
volume = "6A-2016",
booktitle = "Materials and Fabrication",
publisher = "American Society of Mechanical Engineers (ASME)",

}

TY - GEN

T1 - Application of stress-modified fracture strain model to full-scale pipes with a circumferential crack in the center of welds

AU - Ryu, Ho Wan

AU - Jung, Hyun Woo

AU - Kim, Hune Tae

AU - Kim, Yun-Jae

PY - 2016

Y1 - 2016

N2 - A lot of welded joints are required to connect the junctions of components in the complex piping system. The structural integrity assessment on welded pipes is especially important, because the weldments are susceptible to material discontinuities, flaws and residual stresses. Finite element (FE) damage analysis can be useful and effective method for an accurate assessment on extensive structures. For the case of welded joint, the numerical method is necessarily required to assess complex features because of material discontinuities and flaws. This study provides a simple numerical method to simulate ductile tearing in welded full-scale pipes. Stressmodified fracture strain model is applied to finite element analysis with a stress reduction technique. An element-sizedependent critical damage model is also implemented in the fullscale pipe simulations. From the results of simulation, deformation response and characteristic loads are compared with experimentally measured values to verify the application of damage model on weld material. As a result, the predictions of finite element damage analysis are in good agreement with experiments.

AB - A lot of welded joints are required to connect the junctions of components in the complex piping system. The structural integrity assessment on welded pipes is especially important, because the weldments are susceptible to material discontinuities, flaws and residual stresses. Finite element (FE) damage analysis can be useful and effective method for an accurate assessment on extensive structures. For the case of welded joint, the numerical method is necessarily required to assess complex features because of material discontinuities and flaws. This study provides a simple numerical method to simulate ductile tearing in welded full-scale pipes. Stressmodified fracture strain model is applied to finite element analysis with a stress reduction technique. An element-sizedependent critical damage model is also implemented in the fullscale pipe simulations. From the results of simulation, deformation response and characteristic loads are compared with experimentally measured values to verify the application of damage model on weld material. As a result, the predictions of finite element damage analysis are in good agreement with experiments.

UR - http://www.scopus.com/inward/record.url?scp=85006409795&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85006409795&partnerID=8YFLogxK

U2 - 10.1115/PVP2016-63546

DO - 10.1115/PVP2016-63546

M3 - Conference contribution

AN - SCOPUS:85006409795

VL - 6A-2016

BT - Materials and Fabrication

PB - American Society of Mechanical Engineers (ASME)

ER -