Asymmetric coupled lines for common-mode noise suppression in bent differential lines

J. Lim, S. Lee, S. Oh, J. Jeong, Jae Hoon Lee

Research output: Contribution to journalArticle

Abstract

In this Letter, novel asymmetric coupled lines are proposed to suppress common-mode (CM) noise in bent differential lines. Based on the concept of the relative permittivity of a single microstrip line, the width of the outer line is made smaller than that of the inner line in bent differential lines to reduce the time skew and the other design parameters are adjusted to account for the differential impedance. To verify the improvement afforded by the proposed method, the simulated and measured results of the proposed structure were compared with two different designs; the conventional bent differential lines and the compensated differential lines using a serpentine inner line. The results of the proposed method show better signal integrity than the other methods.

Original languageEnglish
Pages (from-to)135-136
Number of pages2
JournalElectronics Letters
Volume55
Issue number3
DOIs
Publication statusPublished - 2019 Feb 7

Fingerprint

Microstrip lines
Permittivity

ASJC Scopus subject areas

  • Electrical and Electronic Engineering

Cite this

Asymmetric coupled lines for common-mode noise suppression in bent differential lines. / Lim, J.; Lee, S.; Oh, S.; Jeong, J.; Lee, Jae Hoon.

In: Electronics Letters, Vol. 55, No. 3, 07.02.2019, p. 135-136.

Research output: Contribution to journalArticle

Lim, J. ; Lee, S. ; Oh, S. ; Jeong, J. ; Lee, Jae Hoon. / Asymmetric coupled lines for common-mode noise suppression in bent differential lines. In: Electronics Letters. 2019 ; Vol. 55, No. 3. pp. 135-136.
@article{9029c063295d4c988e84f78f07c5fc09,
title = "Asymmetric coupled lines for common-mode noise suppression in bent differential lines",
abstract = "In this Letter, novel asymmetric coupled lines are proposed to suppress common-mode (CM) noise in bent differential lines. Based on the concept of the relative permittivity of a single microstrip line, the width of the outer line is made smaller than that of the inner line in bent differential lines to reduce the time skew and the other design parameters are adjusted to account for the differential impedance. To verify the improvement afforded by the proposed method, the simulated and measured results of the proposed structure were compared with two different designs; the conventional bent differential lines and the compensated differential lines using a serpentine inner line. The results of the proposed method show better signal integrity than the other methods.",
author = "J. Lim and S. Lee and S. Oh and J. Jeong and Lee, {Jae Hoon}",
year = "2019",
month = "2",
day = "7",
doi = "10.1049/el.2018.7553",
language = "English",
volume = "55",
pages = "135--136",
journal = "Electronics Letters",
issn = "0013-5194",
publisher = "Institution of Engineering and Technology",
number = "3",

}

TY - JOUR

T1 - Asymmetric coupled lines for common-mode noise suppression in bent differential lines

AU - Lim, J.

AU - Lee, S.

AU - Oh, S.

AU - Jeong, J.

AU - Lee, Jae Hoon

PY - 2019/2/7

Y1 - 2019/2/7

N2 - In this Letter, novel asymmetric coupled lines are proposed to suppress common-mode (CM) noise in bent differential lines. Based on the concept of the relative permittivity of a single microstrip line, the width of the outer line is made smaller than that of the inner line in bent differential lines to reduce the time skew and the other design parameters are adjusted to account for the differential impedance. To verify the improvement afforded by the proposed method, the simulated and measured results of the proposed structure were compared with two different designs; the conventional bent differential lines and the compensated differential lines using a serpentine inner line. The results of the proposed method show better signal integrity than the other methods.

AB - In this Letter, novel asymmetric coupled lines are proposed to suppress common-mode (CM) noise in bent differential lines. Based on the concept of the relative permittivity of a single microstrip line, the width of the outer line is made smaller than that of the inner line in bent differential lines to reduce the time skew and the other design parameters are adjusted to account for the differential impedance. To verify the improvement afforded by the proposed method, the simulated and measured results of the proposed structure were compared with two different designs; the conventional bent differential lines and the compensated differential lines using a serpentine inner line. The results of the proposed method show better signal integrity than the other methods.

UR - http://www.scopus.com/inward/record.url?scp=85061149179&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85061149179&partnerID=8YFLogxK

U2 - 10.1049/el.2018.7553

DO - 10.1049/el.2018.7553

M3 - Article

VL - 55

SP - 135

EP - 136

JO - Electronics Letters

JF - Electronics Letters

SN - 0013-5194

IS - 3

ER -