Atomization characteristics of impinging jets of gel material containing nanoparticles

Gookhyun Baek, Seokwon Kim, Jeongin Han, Chongyoup Kim

Research output: Contribution to journalArticle

50 Citations (Scopus)

Abstract

We have investigated the spray and atomization behavior of 0.35% C934 Carbopol gels with or without 15wt.% SUS304 nanoparticles of 100nm using a doublet like-on-like impinging jet system (orifice diameter of 0.7mm, impingement angle 2θ of 90°) and compared with the spray behavior of water. The spray patterns of gel materials were qualitatively different from those of water and could be divided into four types: open rim and no shedding drop; rimless sheet with ray shaped shedding; sheet with ligament separation; fully developed. The sheet sizes of water and the pure Carbopol gel increased with the increase in jet velocity, but the sheet size of the Carbopol gel containing SUS particles did not change with the increase in velocity. The aspect ratio (Lmax/Wmax) of the sheet was constant at 2.1 for water and 1.7 for two gel materials. Due to the high viscosity of gel materials, the amplification of sinusoidal waves was mitigated and the spreading angle was smaller when compared with water. The breakup length of the pure Carbopol gel was longer than that of water. However the breakup length of the Carbopol gel containing SUS particles was remarkably shorter than that of the pure Carbopol gel due to the increase in impact energy by the heavy particles as well as the decrease in gel strength by the addition of nanoparticles. The drop Sauter mean diameter (SMD) decreased with the increase in jet velocity, and it converged to an asymptotic value. The asymptotically convergent drop SMD of water was about 100μm while that of Carbopol gels was 75-77μm. The elasticity of gels appears to reduce the asymptotic drop size.

Original languageEnglish
Pages (from-to)1272-1285
Number of pages14
JournalJournal of Non-Newtonian Fluid Mechanics
Volume166
Issue number21-22
DOIs
Publication statusPublished - 2011 Nov 1

Fingerprint

Impinging Jet
Atomization
atomizing
Nanoparticles
Gels
gels
nanoparticles
Water
Spray
water
Particles (particulate matter)
sprayers
Breakup
Angle
ligaments
drop size
impingement
Ligaments
orifices
Orifices

Keywords

  • Doublet like-on-like jet
  • Gel propellant
  • Instability
  • Ligament
  • Sauter mean diameter

ASJC Scopus subject areas

  • Condensed Matter Physics
  • Mechanical Engineering
  • Chemical Engineering(all)
  • Materials Science(all)
  • Applied Mathematics

Cite this

Atomization characteristics of impinging jets of gel material containing nanoparticles. / Baek, Gookhyun; Kim, Seokwon; Han, Jeongin; Kim, Chongyoup.

In: Journal of Non-Newtonian Fluid Mechanics, Vol. 166, No. 21-22, 01.11.2011, p. 1272-1285.

Research output: Contribution to journalArticle

Baek, Gookhyun ; Kim, Seokwon ; Han, Jeongin ; Kim, Chongyoup. / Atomization characteristics of impinging jets of gel material containing nanoparticles. In: Journal of Non-Newtonian Fluid Mechanics. 2011 ; Vol. 166, No. 21-22. pp. 1272-1285.
@article{cfab4d561c604d8ea22724e690fa73cf,
title = "Atomization characteristics of impinging jets of gel material containing nanoparticles",
abstract = "We have investigated the spray and atomization behavior of 0.35{\%} C934 Carbopol gels with or without 15wt.{\%} SUS304 nanoparticles of 100nm using a doublet like-on-like impinging jet system (orifice diameter of 0.7mm, impingement angle 2θ of 90°) and compared with the spray behavior of water. The spray patterns of gel materials were qualitatively different from those of water and could be divided into four types: open rim and no shedding drop; rimless sheet with ray shaped shedding; sheet with ligament separation; fully developed. The sheet sizes of water and the pure Carbopol gel increased with the increase in jet velocity, but the sheet size of the Carbopol gel containing SUS particles did not change with the increase in velocity. The aspect ratio (Lmax/Wmax) of the sheet was constant at 2.1 for water and 1.7 for two gel materials. Due to the high viscosity of gel materials, the amplification of sinusoidal waves was mitigated and the spreading angle was smaller when compared with water. The breakup length of the pure Carbopol gel was longer than that of water. However the breakup length of the Carbopol gel containing SUS particles was remarkably shorter than that of the pure Carbopol gel due to the increase in impact energy by the heavy particles as well as the decrease in gel strength by the addition of nanoparticles. The drop Sauter mean diameter (SMD) decreased with the increase in jet velocity, and it converged to an asymptotic value. The asymptotically convergent drop SMD of water was about 100μm while that of Carbopol gels was 75-77μm. The elasticity of gels appears to reduce the asymptotic drop size.",
keywords = "Doublet like-on-like jet, Gel propellant, Instability, Ligament, Sauter mean diameter",
author = "Gookhyun Baek and Seokwon Kim and Jeongin Han and Chongyoup Kim",
year = "2011",
month = "11",
day = "1",
doi = "10.1016/j.jnnfm.2011.08.005",
language = "English",
volume = "166",
pages = "1272--1285",
journal = "Journal of Non-Newtonian Fluid Mechanics",
issn = "0377-0257",
publisher = "Elsevier",
number = "21-22",

}

TY - JOUR

T1 - Atomization characteristics of impinging jets of gel material containing nanoparticles

AU - Baek, Gookhyun

AU - Kim, Seokwon

AU - Han, Jeongin

AU - Kim, Chongyoup

PY - 2011/11/1

Y1 - 2011/11/1

N2 - We have investigated the spray and atomization behavior of 0.35% C934 Carbopol gels with or without 15wt.% SUS304 nanoparticles of 100nm using a doublet like-on-like impinging jet system (orifice diameter of 0.7mm, impingement angle 2θ of 90°) and compared with the spray behavior of water. The spray patterns of gel materials were qualitatively different from those of water and could be divided into four types: open rim and no shedding drop; rimless sheet with ray shaped shedding; sheet with ligament separation; fully developed. The sheet sizes of water and the pure Carbopol gel increased with the increase in jet velocity, but the sheet size of the Carbopol gel containing SUS particles did not change with the increase in velocity. The aspect ratio (Lmax/Wmax) of the sheet was constant at 2.1 for water and 1.7 for two gel materials. Due to the high viscosity of gel materials, the amplification of sinusoidal waves was mitigated and the spreading angle was smaller when compared with water. The breakup length of the pure Carbopol gel was longer than that of water. However the breakup length of the Carbopol gel containing SUS particles was remarkably shorter than that of the pure Carbopol gel due to the increase in impact energy by the heavy particles as well as the decrease in gel strength by the addition of nanoparticles. The drop Sauter mean diameter (SMD) decreased with the increase in jet velocity, and it converged to an asymptotic value. The asymptotically convergent drop SMD of water was about 100μm while that of Carbopol gels was 75-77μm. The elasticity of gels appears to reduce the asymptotic drop size.

AB - We have investigated the spray and atomization behavior of 0.35% C934 Carbopol gels with or without 15wt.% SUS304 nanoparticles of 100nm using a doublet like-on-like impinging jet system (orifice diameter of 0.7mm, impingement angle 2θ of 90°) and compared with the spray behavior of water. The spray patterns of gel materials were qualitatively different from those of water and could be divided into four types: open rim and no shedding drop; rimless sheet with ray shaped shedding; sheet with ligament separation; fully developed. The sheet sizes of water and the pure Carbopol gel increased with the increase in jet velocity, but the sheet size of the Carbopol gel containing SUS particles did not change with the increase in velocity. The aspect ratio (Lmax/Wmax) of the sheet was constant at 2.1 for water and 1.7 for two gel materials. Due to the high viscosity of gel materials, the amplification of sinusoidal waves was mitigated and the spreading angle was smaller when compared with water. The breakup length of the pure Carbopol gel was longer than that of water. However the breakup length of the Carbopol gel containing SUS particles was remarkably shorter than that of the pure Carbopol gel due to the increase in impact energy by the heavy particles as well as the decrease in gel strength by the addition of nanoparticles. The drop Sauter mean diameter (SMD) decreased with the increase in jet velocity, and it converged to an asymptotic value. The asymptotically convergent drop SMD of water was about 100μm while that of Carbopol gels was 75-77μm. The elasticity of gels appears to reduce the asymptotic drop size.

KW - Doublet like-on-like jet

KW - Gel propellant

KW - Instability

KW - Ligament

KW - Sauter mean diameter

UR - http://www.scopus.com/inward/record.url?scp=80053225285&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=80053225285&partnerID=8YFLogxK

U2 - 10.1016/j.jnnfm.2011.08.005

DO - 10.1016/j.jnnfm.2011.08.005

M3 - Article

AN - SCOPUS:80053225285

VL - 166

SP - 1272

EP - 1285

JO - Journal of Non-Newtonian Fluid Mechanics

JF - Journal of Non-Newtonian Fluid Mechanics

SN - 0377-0257

IS - 21-22

ER -