Carbon dioxide capture using poly(ethylenimine)-impregnated poly(methyl methacrylate)-supported sorbents

Hyunchul Jung, Dong Hyun Jo, Chang Hun Lee, Wonkeun Chung, Dongkun Shin, Sung Hyun Kim

Research output: Contribution to journalArticle

12 Citations (Scopus)

Abstract

Solid amine sorbents having adequate particle size with high CO2 adsorption capacity were successfully prepared using poly(ethylenimine) (PEI) as the amine and mesoporous poly(methyl methacrylate) (PMMA) beads as the support. The PEI-impregnated PMMA-supported sorbent exhibited CO2 adsorption capacity up to 4.26 mmol/g with PMMA-55 at 75 °C in pure CO 2 gas flow. The effect of the temperature on the adsorption capacity of PMMA-55 was investigated, and the maximum adsorption capacity was obtained at 50 °C with a CO2 exposure time of 180 min, different from the tendency of most silica-supported sorbents. The effect of surfactant addition on the adsorption performance of PMMA-supported sorbents differed from those of silica-supported sorbents because of the different surface characteristics between PMMA and silica. Adsorption/desorption cycling was also performed to examine the suitability of the amine sorbent for potential application.

Original languageEnglish
Pages (from-to)3994-4001
Number of pages8
JournalEnergy and Fuels
Volume28
Issue number6
DOIs
Publication statusPublished - 2014 Jun 19

    Fingerprint

ASJC Scopus subject areas

  • Chemical Engineering(all)
  • Energy Engineering and Power Technology
  • Fuel Technology

Cite this