Catalytic pyrolytic platform for scrap tires using CO2 and steel slag

Seong Heon Cho, Jeong Ik Oh, Sungyup Jung, Young Kwon Park, Yiu Fai Tsang, Yong Sik Ok, Eilhann E. Kwon

Research output: Contribution to journalArticle

6 Citations (Scopus)

Abstract

This study specifically examined CO2-cofeeding pyrolysis of scrap tire (ST) to enhance H2 generation. Thus, volatile pyrolysates (syngas and pyrolytic oil) from the thermolysis of ST in N2 and CO2 were compared to elucidate the mechanistic roles of CO2. To this end, laboratory scale of pyrolysis of ST from N2 and CO2 was conducted in this study. The gaseous effluents from a pyrolyzer showed that enhanced CO evolution only from CO2-cofeeding pyrolysis of ST. Moreover, a substantial decrease in the formation of benzene derivatives (BDs) including polycyclic aromatic hydrocarbons (PAHs) was discovered from CO2-cofeeding pyrolysis of ST. Those findings offered that CO2 could improve pyrolysis of ST by modifying the pyrogenic products, and those enhanced pyrolysis behaviors were ascribed to the homogeneous interaction between CO2 and pyrolysates from the pyrolysis of ST (more CO generation). To advance the identified roles of CO2, catalytic pyrolysis of ST in CO2 was carried out using steel slag (SS) as a catalyst. In the presence of SS, the effectiveness of CO2 on pyrolysis of ST was dramatically enhanced (~400% enhancement at 400 °C). Therefore, this study experimentally justified that the utilization of SS could alleviate the environmental burdens by adopting CO2 in pyrolysis of ST. Also, the CO enhancement by CO2 likely leads to the H2 enhancement when the water-gas-shift (WGS) reaction was also conducted. All experimental findings from this study suggested that the use of CO2 in pyrolysis of ST could be a breakthrough to enhance H2 formation.

Original languageEnglish
Article number114164
JournalApplied Energy
Volume259
DOIs
Publication statusPublished - 2020 Feb 1

Keywords

  • Carbon dioxide
  • Catalysis
  • Pyrolysis
  • Scrap tire
  • Steel slag
  • Waste-to-energy

ASJC Scopus subject areas

  • Building and Construction
  • Energy(all)
  • Mechanical Engineering
  • Management, Monitoring, Policy and Law

Fingerprint Dive into the research topics of 'Catalytic pyrolytic platform for scrap tires using CO<sub>2</sub> and steel slag'. Together they form a unique fingerprint.

  • Cite this

    Cho, S. H., Oh, J. I., Jung, S., Park, Y. K., Tsang, Y. F., Ok, Y. S., & Kwon, E. E. (2020). Catalytic pyrolytic platform for scrap tires using CO2 and steel slag. Applied Energy, 259, [114164]. https://doi.org/10.1016/j.apenergy.2019.114164