Characteristics of Ce0.6Tb0.4MgAl11O19 phosphor powders prepared by high temperature flame spray pyrolysis

Dae Soo Jung, Jung Sang Cho, Hye Young Koo, Yun Chan Kang

Research output: Contribution to journalArticle

3 Citations (Scopus)

Abstract

Flame spray pyrolysis was introduced to prepare Ce0.6Tb0.4MgAl11O19 phosphor powders. The flow rates of fuel and carrier gas were optimized to prepare the Ce0.6Tb0.4MgAl11O19 phosphor powders with fine size, spherical shape and filled morphology. To produce the Ce0.6Tb0.4MgAl11O19 phosphor powders with fine size, spherical shape and filled morphology, the diffusion flame with high temperature is required to melt completely the precursors. The optimum flow rates of propane and oxygen used as fuel and carrier gas were each 4 and 10 L/min. The powders directly prepared by flame spray pyrolysis had bimodal size distributions of nano-sized and submicron-sized powders with different compositions. However, the composition of post-treated Ce0.6Tb0.4MgAl11O19 phosphor powders was similar in comparison with that of the spray solution. The CTMA phosphor powders prepared by flame spray pyrolysis had higher photoluminescence intensities than those of the phosphor powders prepared by conventional spray pyrolysis.

Original languageEnglish
Pages (from-to)367-372
Number of pages6
JournalJournal of Alloys and Compounds
Volume472
Issue number1-2
DOIs
Publication statusPublished - 2009 Mar 20
Externally publishedYes

Fingerprint

Spray pyrolysis
Phosphors
Powders
Temperature
Gases
Flow rate
Propane
Chemical analysis
Photoluminescence
Oxygen

Keywords

  • Ceramics
  • Chemical synthesis
  • Gas-solid reaction

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Cite this

Characteristics of Ce0.6Tb0.4MgAl11O19 phosphor powders prepared by high temperature flame spray pyrolysis. / Jung, Dae Soo; Cho, Jung Sang; Koo, Hye Young; Kang, Yun Chan.

In: Journal of Alloys and Compounds, Vol. 472, No. 1-2, 20.03.2009, p. 367-372.

Research output: Contribution to journalArticle

@article{8675ea2b0a464107a35b61a2d66c53f9,
title = "Characteristics of Ce0.6Tb0.4MgAl11O19 phosphor powders prepared by high temperature flame spray pyrolysis",
abstract = "Flame spray pyrolysis was introduced to prepare Ce0.6Tb0.4MgAl11O19 phosphor powders. The flow rates of fuel and carrier gas were optimized to prepare the Ce0.6Tb0.4MgAl11O19 phosphor powders with fine size, spherical shape and filled morphology. To produce the Ce0.6Tb0.4MgAl11O19 phosphor powders with fine size, spherical shape and filled morphology, the diffusion flame with high temperature is required to melt completely the precursors. The optimum flow rates of propane and oxygen used as fuel and carrier gas were each 4 and 10 L/min. The powders directly prepared by flame spray pyrolysis had bimodal size distributions of nano-sized and submicron-sized powders with different compositions. However, the composition of post-treated Ce0.6Tb0.4MgAl11O19 phosphor powders was similar in comparison with that of the spray solution. The CTMA phosphor powders prepared by flame spray pyrolysis had higher photoluminescence intensities than those of the phosphor powders prepared by conventional spray pyrolysis.",
keywords = "Ceramics, Chemical synthesis, Gas-solid reaction",
author = "Jung, {Dae Soo} and Cho, {Jung Sang} and Koo, {Hye Young} and Kang, {Yun Chan}",
year = "2009",
month = "3",
day = "20",
doi = "10.1016/j.jallcom.2008.04.077",
language = "English",
volume = "472",
pages = "367--372",
journal = "Journal of Alloys and Compounds",
issn = "0925-8388",
publisher = "Elsevier BV",
number = "1-2",

}

TY - JOUR

T1 - Characteristics of Ce0.6Tb0.4MgAl11O19 phosphor powders prepared by high temperature flame spray pyrolysis

AU - Jung, Dae Soo

AU - Cho, Jung Sang

AU - Koo, Hye Young

AU - Kang, Yun Chan

PY - 2009/3/20

Y1 - 2009/3/20

N2 - Flame spray pyrolysis was introduced to prepare Ce0.6Tb0.4MgAl11O19 phosphor powders. The flow rates of fuel and carrier gas were optimized to prepare the Ce0.6Tb0.4MgAl11O19 phosphor powders with fine size, spherical shape and filled morphology. To produce the Ce0.6Tb0.4MgAl11O19 phosphor powders with fine size, spherical shape and filled morphology, the diffusion flame with high temperature is required to melt completely the precursors. The optimum flow rates of propane and oxygen used as fuel and carrier gas were each 4 and 10 L/min. The powders directly prepared by flame spray pyrolysis had bimodal size distributions of nano-sized and submicron-sized powders with different compositions. However, the composition of post-treated Ce0.6Tb0.4MgAl11O19 phosphor powders was similar in comparison with that of the spray solution. The CTMA phosphor powders prepared by flame spray pyrolysis had higher photoluminescence intensities than those of the phosphor powders prepared by conventional spray pyrolysis.

AB - Flame spray pyrolysis was introduced to prepare Ce0.6Tb0.4MgAl11O19 phosphor powders. The flow rates of fuel and carrier gas were optimized to prepare the Ce0.6Tb0.4MgAl11O19 phosphor powders with fine size, spherical shape and filled morphology. To produce the Ce0.6Tb0.4MgAl11O19 phosphor powders with fine size, spherical shape and filled morphology, the diffusion flame with high temperature is required to melt completely the precursors. The optimum flow rates of propane and oxygen used as fuel and carrier gas were each 4 and 10 L/min. The powders directly prepared by flame spray pyrolysis had bimodal size distributions of nano-sized and submicron-sized powders with different compositions. However, the composition of post-treated Ce0.6Tb0.4MgAl11O19 phosphor powders was similar in comparison with that of the spray solution. The CTMA phosphor powders prepared by flame spray pyrolysis had higher photoluminescence intensities than those of the phosphor powders prepared by conventional spray pyrolysis.

KW - Ceramics

KW - Chemical synthesis

KW - Gas-solid reaction

UR - http://www.scopus.com/inward/record.url?scp=61349183927&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=61349183927&partnerID=8YFLogxK

U2 - 10.1016/j.jallcom.2008.04.077

DO - 10.1016/j.jallcom.2008.04.077

M3 - Article

AN - SCOPUS:61349183927

VL - 472

SP - 367

EP - 372

JO - Journal of Alloys and Compounds

JF - Journal of Alloys and Compounds

SN - 0925-8388

IS - 1-2

ER -