Controlling of texture and microstructure during asymmetrical cold rolling and subsequent annealing in aluminum alloys

M. Y. Huh, H. G. Kang

Research output: Contribution to conferencePaper

Abstract

Asymmetrical cold rolling was carried out in AA 5052 sheets with different velocities of upper and lower rolls. In order to study the major factors governing the formation of texture during asymmetrical rolling, the velocity ratio of upper and lower rolls was varied. The strain states associated with asymmetrical rolling were derived from simulations with the finite element method. It turned out that the evolution of deformation textures in asymmetrically rolled sample strongly depended on the strain history along the stream lines throughout the thickness layers of the rolled sample. Upon annealing, the evolution of recrystallized microstructure and annealing texture strongly depended on the cold rolled microstructure and texture. Randomization of recrystallization texture was obtained in the thickness layers where shear textures developed during asymmetrical cold rolling. The refinement of grains was obtained in the thickness layers being subjected to a large amount of effective strain during asymmetrical rolling.

Original languageEnglish
Pages359-362
Number of pages4
Publication statusPublished - 2008
Event9th International Conference on Technology of Plasticity, ICTP 2008 - Gyeongju, Korea, Republic of
Duration: 2008 Sep 72008 Sep 11

Other

Other9th International Conference on Technology of Plasticity, ICTP 2008
CountryKorea, Republic of
CityGyeongju
Period08/9/708/9/11

ASJC Scopus subject areas

  • Polymers and Plastics

Fingerprint Dive into the research topics of 'Controlling of texture and microstructure during asymmetrical cold rolling and subsequent annealing in aluminum alloys'. Together they form a unique fingerprint.

  • Cite this

    Huh, M. Y., & Kang, H. G. (2008). Controlling of texture and microstructure during asymmetrical cold rolling and subsequent annealing in aluminum alloys. 359-362. Paper presented at 9th International Conference on Technology of Plasticity, ICTP 2008, Gyeongju, Korea, Republic of.