Cooling load design tool for UFAD

Fred Bauman, Stefano Schiavon, Tom Webster, Kwang Ho Lee

Research output: Contribution to journalArticle

11 Citations (Scopus)

Abstract

Cooling load design tool for Underfloor air distribution (UFAD) is developed focused on accounting for the differences between standard overhead (OH) mixing systems and UFAD systems. Transformations were developed by conducting design-day, EnergyPlus simulations, which performs a fundamental heat balance calculation and contains UFAD-specific algorithms that are validated based on extensive laboratory testing. A spreadsheet-based calculation procedure is developed that allows the user to select from different plenum configurations that represent a range of design practice. The design tool predicts the room air temperature profile based on the fraction of the cooling load assigned to the room, room setpoint temperature, the type and number of diffusers, diffuser discharge temperature, and calculated airflow rate. The results show that the reverse series plenum delivers cooler air to the perimeter, resulting in a reduction in airflow of nearly 50%, with increased stratification.

Original languageEnglish
Pages (from-to)62-71
Number of pages10
JournalASHRAE Journal
Volume52
Issue number9
Publication statusPublished - 2010 Sep 1
Externally publishedYes

Fingerprint

Cooling
Air
Spreadsheets
Temperature
Testing

ASJC Scopus subject areas

  • Building and Construction
  • Mechanical Engineering

Cite this

Bauman, F., Schiavon, S., Webster, T., & Lee, K. H. (2010). Cooling load design tool for UFAD. ASHRAE Journal, 52(9), 62-71.

Cooling load design tool for UFAD. / Bauman, Fred; Schiavon, Stefano; Webster, Tom; Lee, Kwang Ho.

In: ASHRAE Journal, Vol. 52, No. 9, 01.09.2010, p. 62-71.

Research output: Contribution to journalArticle

Bauman, F, Schiavon, S, Webster, T & Lee, KH 2010, 'Cooling load design tool for UFAD', ASHRAE Journal, vol. 52, no. 9, pp. 62-71.
Bauman F, Schiavon S, Webster T, Lee KH. Cooling load design tool for UFAD. ASHRAE Journal. 2010 Sep 1;52(9):62-71.
Bauman, Fred ; Schiavon, Stefano ; Webster, Tom ; Lee, Kwang Ho. / Cooling load design tool for UFAD. In: ASHRAE Journal. 2010 ; Vol. 52, No. 9. pp. 62-71.
@article{28c2707792dc4071a971d1cc0f01b0f6,
title = "Cooling load design tool for UFAD",
abstract = "Cooling load design tool for Underfloor air distribution (UFAD) is developed focused on accounting for the differences between standard overhead (OH) mixing systems and UFAD systems. Transformations were developed by conducting design-day, EnergyPlus simulations, which performs a fundamental heat balance calculation and contains UFAD-specific algorithms that are validated based on extensive laboratory testing. A spreadsheet-based calculation procedure is developed that allows the user to select from different plenum configurations that represent a range of design practice. The design tool predicts the room air temperature profile based on the fraction of the cooling load assigned to the room, room setpoint temperature, the type and number of diffusers, diffuser discharge temperature, and calculated airflow rate. The results show that the reverse series plenum delivers cooler air to the perimeter, resulting in a reduction in airflow of nearly 50{\%}, with increased stratification.",
author = "Fred Bauman and Stefano Schiavon and Tom Webster and Lee, {Kwang Ho}",
year = "2010",
month = "9",
day = "1",
language = "English",
volume = "52",
pages = "62--71",
journal = "ASHRAE Journal",
issn = "0001-2491",
publisher = "Amer. Soc. Heating, Ref. Air-Conditoning Eng. Inc.",
number = "9",

}

TY - JOUR

T1 - Cooling load design tool for UFAD

AU - Bauman, Fred

AU - Schiavon, Stefano

AU - Webster, Tom

AU - Lee, Kwang Ho

PY - 2010/9/1

Y1 - 2010/9/1

N2 - Cooling load design tool for Underfloor air distribution (UFAD) is developed focused on accounting for the differences between standard overhead (OH) mixing systems and UFAD systems. Transformations were developed by conducting design-day, EnergyPlus simulations, which performs a fundamental heat balance calculation and contains UFAD-specific algorithms that are validated based on extensive laboratory testing. A spreadsheet-based calculation procedure is developed that allows the user to select from different plenum configurations that represent a range of design practice. The design tool predicts the room air temperature profile based on the fraction of the cooling load assigned to the room, room setpoint temperature, the type and number of diffusers, diffuser discharge temperature, and calculated airflow rate. The results show that the reverse series plenum delivers cooler air to the perimeter, resulting in a reduction in airflow of nearly 50%, with increased stratification.

AB - Cooling load design tool for Underfloor air distribution (UFAD) is developed focused on accounting for the differences between standard overhead (OH) mixing systems and UFAD systems. Transformations were developed by conducting design-day, EnergyPlus simulations, which performs a fundamental heat balance calculation and contains UFAD-specific algorithms that are validated based on extensive laboratory testing. A spreadsheet-based calculation procedure is developed that allows the user to select from different plenum configurations that represent a range of design practice. The design tool predicts the room air temperature profile based on the fraction of the cooling load assigned to the room, room setpoint temperature, the type and number of diffusers, diffuser discharge temperature, and calculated airflow rate. The results show that the reverse series plenum delivers cooler air to the perimeter, resulting in a reduction in airflow of nearly 50%, with increased stratification.

UR - http://www.scopus.com/inward/record.url?scp=77958167939&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77958167939&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:77958167939

VL - 52

SP - 62

EP - 71

JO - ASHRAE Journal

JF - ASHRAE Journal

SN - 0001-2491

IS - 9

ER -