Correlation of microscopic structures to the strain rate hardening of SPCC steel

Hoon Huh, Jong Hun Yoon, Chan Gyung Park, Ju Seok Kang, Moo Young Huh, Hyung Gu Kang

Research output: Contribution to journalArticle

16 Citations (Scopus)

Abstract

The high strain rate properties of steel have been studied for accurate crashworthiness of vehicles. The mechanical properties at high strain rates show different characteristics from those at the quasi-static state. In order to seek for the physical phenomenon of the strain rate hardening, a microscopic investigation has been conducted for the texture evolution and dislocation behavior of steel. Tensile tests were performed at strain rates ranged from 0.001/s to 100/s, which is the common range in practical vehicle crashes to investigate the microstructural variation and dislocation behavior. According to experimental results of the EBSD and TEM experiment, the texture evolution does not develop remarkably with the variation in strain rates, while dislocation structure and behavior investigated by TEM experiments show significant difference with the variation in strain rates. The change in the dislocation structure, behavior, and density with the variation of strain rates clearly explains the mechanism of the strain rate hardening showing that round half-loop dislocations are replaced by straight and crossing dislocations and then by cell structured dislocations.

Original languageEnglish
Pages (from-to)745-753
Number of pages9
JournalInternational Journal of Mechanical Sciences
Volume52
Issue number5
DOIs
Publication statusPublished - 2010 May 1

Fingerprint

Steel
hardening
strain rate
Hardening
Strain rate
steels
vehicles
crashworthiness
textures
Textures
Transmission electron microscopy
Crashworthiness
crashes
transmission electron microscopy
tensile tests
Experiments
mechanical properties
Mechanical properties
cells

Keywords

  • Dislocation structure
  • Electron backscattered diffraction
  • High strain rate
  • Strain rate hardening
  • Transmission electron microscopy

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Mechanical Engineering
  • Mechanics of Materials
  • Materials Science(all)
  • Condensed Matter Physics

Cite this

Correlation of microscopic structures to the strain rate hardening of SPCC steel. / Huh, Hoon; Yoon, Jong Hun; Park, Chan Gyung; Kang, Ju Seok; Huh, Moo Young; Kang, Hyung Gu.

In: International Journal of Mechanical Sciences, Vol. 52, No. 5, 01.05.2010, p. 745-753.

Research output: Contribution to journalArticle

Huh, Hoon ; Yoon, Jong Hun ; Park, Chan Gyung ; Kang, Ju Seok ; Huh, Moo Young ; Kang, Hyung Gu. / Correlation of microscopic structures to the strain rate hardening of SPCC steel. In: International Journal of Mechanical Sciences. 2010 ; Vol. 52, No. 5. pp. 745-753.
@article{eba1f36cbd7441278072da84094040c0,
title = "Correlation of microscopic structures to the strain rate hardening of SPCC steel",
abstract = "The high strain rate properties of steel have been studied for accurate crashworthiness of vehicles. The mechanical properties at high strain rates show different characteristics from those at the quasi-static state. In order to seek for the physical phenomenon of the strain rate hardening, a microscopic investigation has been conducted for the texture evolution and dislocation behavior of steel. Tensile tests were performed at strain rates ranged from 0.001/s to 100/s, which is the common range in practical vehicle crashes to investigate the microstructural variation and dislocation behavior. According to experimental results of the EBSD and TEM experiment, the texture evolution does not develop remarkably with the variation in strain rates, while dislocation structure and behavior investigated by TEM experiments show significant difference with the variation in strain rates. The change in the dislocation structure, behavior, and density with the variation of strain rates clearly explains the mechanism of the strain rate hardening showing that round half-loop dislocations are replaced by straight and crossing dislocations and then by cell structured dislocations.",
keywords = "Dislocation structure, Electron backscattered diffraction, High strain rate, Strain rate hardening, Transmission electron microscopy",
author = "Hoon Huh and Yoon, {Jong Hun} and Park, {Chan Gyung} and Kang, {Ju Seok} and Huh, {Moo Young} and Kang, {Hyung Gu}",
year = "2010",
month = "5",
day = "1",
doi = "10.1016/j.ijmecsci.2010.01.006",
language = "English",
volume = "52",
pages = "745--753",
journal = "International Journal of Mechanical Sciences",
issn = "0020-7403",
publisher = "Elsevier Limited",
number = "5",

}

TY - JOUR

T1 - Correlation of microscopic structures to the strain rate hardening of SPCC steel

AU - Huh, Hoon

AU - Yoon, Jong Hun

AU - Park, Chan Gyung

AU - Kang, Ju Seok

AU - Huh, Moo Young

AU - Kang, Hyung Gu

PY - 2010/5/1

Y1 - 2010/5/1

N2 - The high strain rate properties of steel have been studied for accurate crashworthiness of vehicles. The mechanical properties at high strain rates show different characteristics from those at the quasi-static state. In order to seek for the physical phenomenon of the strain rate hardening, a microscopic investigation has been conducted for the texture evolution and dislocation behavior of steel. Tensile tests were performed at strain rates ranged from 0.001/s to 100/s, which is the common range in practical vehicle crashes to investigate the microstructural variation and dislocation behavior. According to experimental results of the EBSD and TEM experiment, the texture evolution does not develop remarkably with the variation in strain rates, while dislocation structure and behavior investigated by TEM experiments show significant difference with the variation in strain rates. The change in the dislocation structure, behavior, and density with the variation of strain rates clearly explains the mechanism of the strain rate hardening showing that round half-loop dislocations are replaced by straight and crossing dislocations and then by cell structured dislocations.

AB - The high strain rate properties of steel have been studied for accurate crashworthiness of vehicles. The mechanical properties at high strain rates show different characteristics from those at the quasi-static state. In order to seek for the physical phenomenon of the strain rate hardening, a microscopic investigation has been conducted for the texture evolution and dislocation behavior of steel. Tensile tests were performed at strain rates ranged from 0.001/s to 100/s, which is the common range in practical vehicle crashes to investigate the microstructural variation and dislocation behavior. According to experimental results of the EBSD and TEM experiment, the texture evolution does not develop remarkably with the variation in strain rates, while dislocation structure and behavior investigated by TEM experiments show significant difference with the variation in strain rates. The change in the dislocation structure, behavior, and density with the variation of strain rates clearly explains the mechanism of the strain rate hardening showing that round half-loop dislocations are replaced by straight and crossing dislocations and then by cell structured dislocations.

KW - Dislocation structure

KW - Electron backscattered diffraction

KW - High strain rate

KW - Strain rate hardening

KW - Transmission electron microscopy

UR - http://www.scopus.com/inward/record.url?scp=77951294697&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=77951294697&partnerID=8YFLogxK

U2 - 10.1016/j.ijmecsci.2010.01.006

DO - 10.1016/j.ijmecsci.2010.01.006

M3 - Article

VL - 52

SP - 745

EP - 753

JO - International Journal of Mechanical Sciences

JF - International Journal of Mechanical Sciences

SN - 0020-7403

IS - 5

ER -