Crypto based EPC C1G2 UHF (860 MHz-960 MHz) passive RFID tag chip

Hee Bok Kang, Suk Kyoung Hong, Yong Wook Song, Man Young Sung, Bok Gil Choi, Jinyong Chung, Jong Wook Lee

Research output: Contribution to journalArticle


The metal-ferroelectric-metal (MFM) capacitor in ferroelectric random access memory (FeRAM) security embedded RFID chip is used not only in the memory cell region but also used in the analog and digital circuit area for low cost capacitance device and high security algorithm. MFM based security FeRAM braces for a wide range of security threats such as reverse engineering, cloning, and tampering. High security performance solution of on-chip FeRAM based register key is implemented to prepare against security attacking. RF transferring sensitivity properties with MFM capacitor are almost same or better than that with poly-insulator-poly (PIP) capacitor and metal-insulator-metal (MIM), and MOS capacitor. The measured power consumption of FeRAM embedded RFID chip without crypto processor engine is about 10 W with the write sensitivity of -18dBm.

Original languageEnglish
Pages (from-to)216-227
Number of pages12
JournalIntegrated Ferroelectrics
Issue number1
Publication statusPublished - 2008 Dec 1


  • 3-DES
  • DES
  • Electronic fuse
  • EPC
  • FeRAM
  • MFM
  • MIM
  • MRAM
  • Passive RFID tag
  • PIP
  • PRAM
  • Security
  • UHF

ASJC Scopus subject areas

  • Electrical and Electronic Engineering
  • Ceramics and Composites
  • Electronic, Optical and Magnetic Materials
  • Materials Chemistry
  • Condensed Matter Physics
  • Control and Systems Engineering

Fingerprint Dive into the research topics of 'Crypto based EPC C1G2 UHF (860 MHz-960 MHz) passive RFID tag chip'. Together they form a unique fingerprint.

  • Cite this

    Kang, H. B., Hong, S. K., Song, Y. W., Sung, M. Y., Choi, B. G., Chung, J., & Lee, J. W. (2008). Crypto based EPC C1G2 UHF (860 MHz-960 MHz) passive RFID tag chip. Integrated Ferroelectrics, 100(1), 216-227.