Deburring of offset hole intersection with abrasive flow machining

Kwang Joon Kim, Young Gwan Kim, Kwon Hee Kim

Research output: Contribution to journalArticle

Abstract

Burr is an unintentional residue caused by plastic deformation of the workpiece during machining such as drilling and milling. Burrs generated in the intersecting holes deep inside the work piece are difficult to access and remove. In this work, the effects of various AFM process parameters are investigated for holes intersecting at right angle with offset. Burr edge is formed in the wall of the primary hole by the secondary hole. Experiments were carried out for AL6061 specimens with flow distance, abrasive particle size, abrasive particle concentration, abrasive fluid viscosity and flow speed allocated in L8(25) orthogonal array. The mean value analysis indicates that deburring is strongly dependent on the flow distance while the effect of flow speed is minimal.

Original languageEnglish
Pages (from-to)507-511
Number of pages5
JournalTransactions of the Korean Society of Mechanical Engineers, A
Volume43
Issue number7
DOIs
Publication statusPublished - 2019 Jan 1

Fingerprint

Deburring
Abrasives
Machining
Value engineering
Milling (machining)
Plastic deformation
Drilling
Particle size
Viscosity
Fluids
Experiments

Keywords

  • Abrasive Flow Machining
  • Burr
  • Deburring
  • Intersecting Holes

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Deburring of offset hole intersection with abrasive flow machining. / Kim, Kwang Joon; Kim, Young Gwan; Kim, Kwon Hee.

In: Transactions of the Korean Society of Mechanical Engineers, A, Vol. 43, No. 7, 01.01.2019, p. 507-511.

Research output: Contribution to journalArticle

@article{32ea70f545b4464284edfce759a90500,
title = "Deburring of offset hole intersection with abrasive flow machining",
abstract = "Burr is an unintentional residue caused by plastic deformation of the workpiece during machining such as drilling and milling. Burrs generated in the intersecting holes deep inside the work piece are difficult to access and remove. In this work, the effects of various AFM process parameters are investigated for holes intersecting at right angle with offset. Burr edge is formed in the wall of the primary hole by the secondary hole. Experiments were carried out for AL6061 specimens with flow distance, abrasive particle size, abrasive particle concentration, abrasive fluid viscosity and flow speed allocated in L8(25) orthogonal array. The mean value analysis indicates that deburring is strongly dependent on the flow distance while the effect of flow speed is minimal.",
keywords = "Abrasive Flow Machining, Burr, Deburring, Intersecting Holes",
author = "Kim, {Kwang Joon} and Kim, {Young Gwan} and Kim, {Kwon Hee}",
year = "2019",
month = "1",
day = "1",
doi = "10.3795/KSME-A.2019.43.7.507",
language = "English",
volume = "43",
pages = "507--511",
journal = "Transactions of the Korean Society of Mechanical Engineers, A",
issn = "1226-4873",
publisher = "Korean Society of Mechanical Engineers",
number = "7",

}

TY - JOUR

T1 - Deburring of offset hole intersection with abrasive flow machining

AU - Kim, Kwang Joon

AU - Kim, Young Gwan

AU - Kim, Kwon Hee

PY - 2019/1/1

Y1 - 2019/1/1

N2 - Burr is an unintentional residue caused by plastic deformation of the workpiece during machining such as drilling and milling. Burrs generated in the intersecting holes deep inside the work piece are difficult to access and remove. In this work, the effects of various AFM process parameters are investigated for holes intersecting at right angle with offset. Burr edge is formed in the wall of the primary hole by the secondary hole. Experiments were carried out for AL6061 specimens with flow distance, abrasive particle size, abrasive particle concentration, abrasive fluid viscosity and flow speed allocated in L8(25) orthogonal array. The mean value analysis indicates that deburring is strongly dependent on the flow distance while the effect of flow speed is minimal.

AB - Burr is an unintentional residue caused by plastic deformation of the workpiece during machining such as drilling and milling. Burrs generated in the intersecting holes deep inside the work piece are difficult to access and remove. In this work, the effects of various AFM process parameters are investigated for holes intersecting at right angle with offset. Burr edge is formed in the wall of the primary hole by the secondary hole. Experiments were carried out for AL6061 specimens with flow distance, abrasive particle size, abrasive particle concentration, abrasive fluid viscosity and flow speed allocated in L8(25) orthogonal array. The mean value analysis indicates that deburring is strongly dependent on the flow distance while the effect of flow speed is minimal.

KW - Abrasive Flow Machining

KW - Burr

KW - Deburring

KW - Intersecting Holes

UR - http://www.scopus.com/inward/record.url?scp=85069664305&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85069664305&partnerID=8YFLogxK

U2 - 10.3795/KSME-A.2019.43.7.507

DO - 10.3795/KSME-A.2019.43.7.507

M3 - Article

AN - SCOPUS:85069664305

VL - 43

SP - 507

EP - 511

JO - Transactions of the Korean Society of Mechanical Engineers, A

JF - Transactions of the Korean Society of Mechanical Engineers, A

SN - 1226-4873

IS - 7

ER -