Design of Road Surface Lighting System for Rear Lamp using Automotive Ultrasonic Sensor

Donghee Han; Hyo Bin Choi; Yong Sin Kim

doi:10.1109/ISOCC.2018.8649888

Design of Road Surface Lighting System for Rear Lamp using Automotive Ultrasonic Sensor

Donghee Han, Hyo Bin Choi, Yong Sin Kim

School of Electrical Engineering

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

1 Citation (Scopus)

Abstract

There are quite a lot of accidents with pedestrians when backing a car. To prevent such accidents, recently, road surface lighting has appeared in the automotive industry. This technology is used to inform pedestrians that the vehicle is approaching by projecting light onto the road surface. In this paper, we propose the technology that changes a light pattern according to pedestrian's position to improve his visibility by linking existing automotive ultrasonic sensors and road surface lighting module.

Original language	English
Title of host publication	Proceedings - International SoC Design Conference 2018, ISOCC 2018
Publisher	Institute of Electrical and Electronics Engineers Inc.
Pages	249-250
Number of pages	2
ISBN (Electronic)	9781538679609
DOIs	https://doi.org/10.1109/ISOCC.2018.8649888
Publication status	Published - 2019 Feb 22
Event	15th International SoC Design Conference, ISOCC 2018 - Daegu, Korea, Republic of Duration: 2018 Nov 12 → 2018 Nov 15

Publication series

Name	Proceedings - International SoC Design Conference 2018, ISOCC 2018

Conference

Conference	15th International SoC Design Conference, ISOCC 2018
Country/Territory	Korea, Republic of
City	Daegu
Period	18/11/12 → 18/11/15

Keywords

Automotive Ultrasonic Sensor
Pedestrian Safety
Rear lamp
Road surface lighting

ASJC Scopus subject areas

Hardware and Architecture
Electrical and Electronic Engineering
Electronic, Optical and Magnetic Materials

Access to Document

10.1109/ISOCC.2018.8649888

Cite this

Han, D., Choi, H. B., & Sin Kim, Y. (2019). Design of Road Surface Lighting System for Rear Lamp using Automotive Ultrasonic Sensor. In Proceedings - International SoC Design Conference 2018, ISOCC 2018 (pp. 249-250). [8649888] (Proceedings - International SoC Design Conference 2018, ISOCC 2018). Institute of Electrical and Electronics Engineers Inc.. https://doi.org/10.1109/ISOCC.2018.8649888

Design of Road Surface Lighting System for Rear Lamp using Automotive Ultrasonic Sensor. / Han, Donghee; Choi, Hyo Bin; Sin Kim, Yong.

Proceedings - International SoC Design Conference 2018, ISOCC 2018. Institute of Electrical and Electronics Engineers Inc., 2019. p. 249-250 8649888 (Proceedings - International SoC Design Conference 2018, ISOCC 2018).

Research output: Chapter in Book/Report/Conference proceeding › Conference contribution

Han, D, Choi, HB & Sin Kim, Y 2019, Design of Road Surface Lighting System for Rear Lamp using Automotive Ultrasonic Sensor. in Proceedings - International SoC Design Conference 2018, ISOCC 2018., 8649888, Proceedings - International SoC Design Conference 2018, ISOCC 2018, Institute of Electrical and Electronics Engineers Inc., pp. 249-250, 15th International SoC Design Conference, ISOCC 2018, Daegu, Korea, Republic of, 18/11/12. https://doi.org/10.1109/ISOCC.2018.8649888

Han D, Choi HB, Sin Kim Y. Design of Road Surface Lighting System for Rear Lamp using Automotive Ultrasonic Sensor. In Proceedings - International SoC Design Conference 2018, ISOCC 2018. Institute of Electrical and Electronics Engineers Inc. 2019. p. 249-250. 8649888. (Proceedings - International SoC Design Conference 2018, ISOCC 2018). doi: 10.1109/ISOCC.2018.8649888

@inproceedings{689d5d94489f44f9aad68cb81a564a78,

title = "Design of Road Surface Lighting System for Rear Lamp using Automotive Ultrasonic Sensor",

abstract = "There are quite a lot of accidents with pedestrians when backing a car. To prevent such accidents, recently, road surface lighting has appeared in the automotive industry. This technology is used to inform pedestrians that the vehicle is approaching by projecting light onto the road surface. In this paper, we propose the technology that changes a light pattern according to pedestrian's position to improve his visibility by linking existing automotive ultrasonic sensors and road surface lighting module.",

keywords = "Automotive Ultrasonic Sensor, Pedestrian Safety, Rear lamp, Road surface lighting",

author = "Donghee Han and Choi, {Hyo Bin} and {Sin Kim}, Yong",

note = "Funding Information: This work is partly supported by the Technology development Program(S2522887) funded by the Ministry of SMEs and Startups(MSS, Korea) and also in part by the Basic Science Research Program through the National Research Foundation of Korea within the Ministry of Science, ICT and Future Planning under Grant NRF-2014R1A1A1003771. Publisher Copyright: {\textcopyright} 2018 IEEE.; 15th International SoC Design Conference, ISOCC 2018 ; Conference date: 12-11-2018 Through 15-11-2018",

year = "2019",

month = feb,

day = "22",

doi = "10.1109/ISOCC.2018.8649888",

language = "English",

series = "Proceedings - International SoC Design Conference 2018, ISOCC 2018",

publisher = "Institute of Electrical and Electronics Engineers Inc.",

pages = "249--250",

booktitle = "Proceedings - International SoC Design Conference 2018, ISOCC 2018",

}

TY - GEN

T1 - Design of Road Surface Lighting System for Rear Lamp using Automotive Ultrasonic Sensor

AU - Han, Donghee

AU - Choi, Hyo Bin

AU - Sin Kim, Yong

N1 - Funding Information: This work is partly supported by the Technology development Program(S2522887) funded by the Ministry of SMEs and Startups(MSS, Korea) and also in part by the Basic Science Research Program through the National Research Foundation of Korea within the Ministry of Science, ICT and Future Planning under Grant NRF-2014R1A1A1003771. Publisher Copyright: © 2018 IEEE.

PY - 2019/2/22

Y1 - 2019/2/22

N2 - There are quite a lot of accidents with pedestrians when backing a car. To prevent such accidents, recently, road surface lighting has appeared in the automotive industry. This technology is used to inform pedestrians that the vehicle is approaching by projecting light onto the road surface. In this paper, we propose the technology that changes a light pattern according to pedestrian's position to improve his visibility by linking existing automotive ultrasonic sensors and road surface lighting module.

AB - There are quite a lot of accidents with pedestrians when backing a car. To prevent such accidents, recently, road surface lighting has appeared in the automotive industry. This technology is used to inform pedestrians that the vehicle is approaching by projecting light onto the road surface. In this paper, we propose the technology that changes a light pattern according to pedestrian's position to improve his visibility by linking existing automotive ultrasonic sensors and road surface lighting module.

KW - Automotive Ultrasonic Sensor

KW - Pedestrian Safety

KW - Rear lamp

KW - Road surface lighting

UR - http://www.scopus.com/inward/record.url?scp=85063194288&partnerID=8YFLogxK

U2 - 10.1109/ISOCC.2018.8649888

DO - 10.1109/ISOCC.2018.8649888

M3 - Conference contribution

AN - SCOPUS:85063194288

T3 - Proceedings - International SoC Design Conference 2018, ISOCC 2018

SP - 249

EP - 250

BT - Proceedings - International SoC Design Conference 2018, ISOCC 2018

PB - Institute of Electrical and Electronics Engineers Inc.

T2 - 15th International SoC Design Conference, ISOCC 2018

Y2 - 12 November 2018 through 15 November 2018

ER -

Design of Road Surface Lighting System for Rear Lamp using Automotive Ultrasonic Sensor

Abstract

Publication series

Conference

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this