Design of vertical type probe tip using finite element analysis

Young Ryun Oh, Yun-Jae Kim, Hyun Suk Nam, Ung Gi Park, Hak Joo Lee, Jung Yub Kim, Jun Hyub Park

Research output: Contribution to journalArticle

Abstract

The design process of a micro-probe tip is very complicated and expensive. To avoid these problems, in this study, we used element (FE) analysis. To simplify design process . A new pre-probe tip (cobra-needle type) made of Ni and Co was designed by FE analysis. Experimental results were compared with those obtained by FE analysis to verify the reliability of the analysis. The contact force and over drive were respectively found to be 12.5 gf(Contact Force) and 100 μm(Over drive). We propose the new designed probe tip. Material of new designed probe tip is NiCo. Values of Property are 1̃2 gf(Contact Force) and 100 μμm(Over drive).

Original languageEnglish
Pages (from-to)851-856
Number of pages6
JournalTransactions of the Korean Society of Mechanical Engineers, A
Volume36
Issue number8
DOIs
Publication statusPublished - 2012 Jan 1

Fingerprint

Finite element method
Needles

Keywords

  • FE analysis
  • MEMS process
  • Probe test
  • Probe tip

ASJC Scopus subject areas

  • Mechanical Engineering

Cite this

Design of vertical type probe tip using finite element analysis. / Oh, Young Ryun; Kim, Yun-Jae; Nam, Hyun Suk; Park, Ung Gi; Lee, Hak Joo; Kim, Jung Yub; Park, Jun Hyub.

In: Transactions of the Korean Society of Mechanical Engineers, A, Vol. 36, No. 8, 01.01.2012, p. 851-856.

Research output: Contribution to journalArticle

Oh, Young Ryun ; Kim, Yun-Jae ; Nam, Hyun Suk ; Park, Ung Gi ; Lee, Hak Joo ; Kim, Jung Yub ; Park, Jun Hyub. / Design of vertical type probe tip using finite element analysis. In: Transactions of the Korean Society of Mechanical Engineers, A. 2012 ; Vol. 36, No. 8. pp. 851-856.
@article{daf6a9ebcc8b4bf891a51ef37ef88725,
title = "Design of vertical type probe tip using finite element analysis",
abstract = "The design process of a micro-probe tip is very complicated and expensive. To avoid these problems, in this study, we used element (FE) analysis. To simplify design process . A new pre-probe tip (cobra-needle type) made of Ni and Co was designed by FE analysis. Experimental results were compared with those obtained by FE analysis to verify the reliability of the analysis. The contact force and over drive were respectively found to be 12.5 gf(Contact Force) and 100 μm(Over drive). We propose the new designed probe tip. Material of new designed probe tip is NiCo. Values of Property are 1̃2 gf(Contact Force) and 100 μμm(Over drive).",
keywords = "FE analysis, MEMS process, Probe test, Probe tip",
author = "Oh, {Young Ryun} and Yun-Jae Kim and Nam, {Hyun Suk} and Park, {Ung Gi} and Lee, {Hak Joo} and Kim, {Jung Yub} and Park, {Jun Hyub}",
year = "2012",
month = "1",
day = "1",
doi = "10.3795/KSME-A.2012.36.8.851",
language = "English",
volume = "36",
pages = "851--856",
journal = "Transactions of the Korean Society of Mechanical Engineers, A",
issn = "1226-4873",
publisher = "Korean Society of Mechanical Engineers",
number = "8",

}

TY - JOUR

T1 - Design of vertical type probe tip using finite element analysis

AU - Oh, Young Ryun

AU - Kim, Yun-Jae

AU - Nam, Hyun Suk

AU - Park, Ung Gi

AU - Lee, Hak Joo

AU - Kim, Jung Yub

AU - Park, Jun Hyub

PY - 2012/1/1

Y1 - 2012/1/1

N2 - The design process of a micro-probe tip is very complicated and expensive. To avoid these problems, in this study, we used element (FE) analysis. To simplify design process . A new pre-probe tip (cobra-needle type) made of Ni and Co was designed by FE analysis. Experimental results were compared with those obtained by FE analysis to verify the reliability of the analysis. The contact force and over drive were respectively found to be 12.5 gf(Contact Force) and 100 μm(Over drive). We propose the new designed probe tip. Material of new designed probe tip is NiCo. Values of Property are 1̃2 gf(Contact Force) and 100 μμm(Over drive).

AB - The design process of a micro-probe tip is very complicated and expensive. To avoid these problems, in this study, we used element (FE) analysis. To simplify design process . A new pre-probe tip (cobra-needle type) made of Ni and Co was designed by FE analysis. Experimental results were compared with those obtained by FE analysis to verify the reliability of the analysis. The contact force and over drive were respectively found to be 12.5 gf(Contact Force) and 100 μm(Over drive). We propose the new designed probe tip. Material of new designed probe tip is NiCo. Values of Property are 1̃2 gf(Contact Force) and 100 μμm(Over drive).

KW - FE analysis

KW - MEMS process

KW - Probe test

KW - Probe tip

UR - http://www.scopus.com/inward/record.url?scp=84898422461&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84898422461&partnerID=8YFLogxK

U2 - 10.3795/KSME-A.2012.36.8.851

DO - 10.3795/KSME-A.2012.36.8.851

M3 - Article

AN - SCOPUS:84898422461

VL - 36

SP - 851

EP - 856

JO - Transactions of the Korean Society of Mechanical Engineers, A

JF - Transactions of the Korean Society of Mechanical Engineers, A

SN - 1226-4873

IS - 8

ER -