Detection of quench in HTS transformer windings

Y. Hwang, S. Lee, W. Kim, K. Choi, Haigun Lee

Research output: Contribution to journalArticle

4 Citations (Scopus)

Abstract

HTS winding for power applications have been developed by improving HTS wire performance. A critical current of HTS winding is determined by a standard criterion of 1 μV/cm In DC operation. Determining a critical current of the HTS winding is more complicated in AC operation. A terminal voltage of a winding contains contributions from a resistive component and an inductive component. Moreover, when the load current crosses over the critical current in the HTS winding, the growth of the resistance is not so fast. The critical criterion of AC current is not defined yet. In this paper, we investigated the detection of critical criterion of HTS windings in AC operation by acoustic emission (AE) and other techniques. An AE sensor was attached on a continuous disk winding and we compared the results with the DC critical current. The results showed that the sensor caught reasonable acoustic signals at the current level below the DC critical current.

Original languageEnglish
Pages (from-to)1229-1232
Number of pages4
JournalPhysica C: Superconductivity and its Applications
Volume463-465
Issue numberSUPPL.
DOIs
Publication statusPublished - 2007 Oct 1

Fingerprint

Transformer windings
Critical currents
transformers
critical current
Acoustic emissions
alternating current
direct current
acoustic emission
Sensors
sensors
Acoustics
Wire
Electric potential
wire
acoustics
electric potential

Keywords

  • AC losses
  • Acoustic emission
  • Continuous disk winding
  • High voltage HTS transformer

ASJC Scopus subject areas

  • Condensed Matter Physics

Cite this

Detection of quench in HTS transformer windings. / Hwang, Y.; Lee, S.; Kim, W.; Choi, K.; Lee, Haigun.

In: Physica C: Superconductivity and its Applications, Vol. 463-465, No. SUPPL., 01.10.2007, p. 1229-1232.

Research output: Contribution to journalArticle

Hwang, Y. ; Lee, S. ; Kim, W. ; Choi, K. ; Lee, Haigun. / Detection of quench in HTS transformer windings. In: Physica C: Superconductivity and its Applications. 2007 ; Vol. 463-465, No. SUPPL. pp. 1229-1232.
@article{a9f1e885719b442babb0dcb1b4fb44a9,
title = "Detection of quench in HTS transformer windings",
abstract = "HTS winding for power applications have been developed by improving HTS wire performance. A critical current of HTS winding is determined by a standard criterion of 1 μV/cm In DC operation. Determining a critical current of the HTS winding is more complicated in AC operation. A terminal voltage of a winding contains contributions from a resistive component and an inductive component. Moreover, when the load current crosses over the critical current in the HTS winding, the growth of the resistance is not so fast. The critical criterion of AC current is not defined yet. In this paper, we investigated the detection of critical criterion of HTS windings in AC operation by acoustic emission (AE) and other techniques. An AE sensor was attached on a continuous disk winding and we compared the results with the DC critical current. The results showed that the sensor caught reasonable acoustic signals at the current level below the DC critical current.",
keywords = "AC losses, Acoustic emission, Continuous disk winding, High voltage HTS transformer",
author = "Y. Hwang and S. Lee and W. Kim and K. Choi and Haigun Lee",
year = "2007",
month = "10",
day = "1",
doi = "10.1016/j.physc.2007.03.485",
language = "English",
volume = "463-465",
pages = "1229--1232",
journal = "Physica C: Superconductivity and its Applications",
issn = "0921-4534",
publisher = "Elsevier",
number = "SUPPL.",

}

TY - JOUR

T1 - Detection of quench in HTS transformer windings

AU - Hwang, Y.

AU - Lee, S.

AU - Kim, W.

AU - Choi, K.

AU - Lee, Haigun

PY - 2007/10/1

Y1 - 2007/10/1

N2 - HTS winding for power applications have been developed by improving HTS wire performance. A critical current of HTS winding is determined by a standard criterion of 1 μV/cm In DC operation. Determining a critical current of the HTS winding is more complicated in AC operation. A terminal voltage of a winding contains contributions from a resistive component and an inductive component. Moreover, when the load current crosses over the critical current in the HTS winding, the growth of the resistance is not so fast. The critical criterion of AC current is not defined yet. In this paper, we investigated the detection of critical criterion of HTS windings in AC operation by acoustic emission (AE) and other techniques. An AE sensor was attached on a continuous disk winding and we compared the results with the DC critical current. The results showed that the sensor caught reasonable acoustic signals at the current level below the DC critical current.

AB - HTS winding for power applications have been developed by improving HTS wire performance. A critical current of HTS winding is determined by a standard criterion of 1 μV/cm In DC operation. Determining a critical current of the HTS winding is more complicated in AC operation. A terminal voltage of a winding contains contributions from a resistive component and an inductive component. Moreover, when the load current crosses over the critical current in the HTS winding, the growth of the resistance is not so fast. The critical criterion of AC current is not defined yet. In this paper, we investigated the detection of critical criterion of HTS windings in AC operation by acoustic emission (AE) and other techniques. An AE sensor was attached on a continuous disk winding and we compared the results with the DC critical current. The results showed that the sensor caught reasonable acoustic signals at the current level below the DC critical current.

KW - AC losses

KW - Acoustic emission

KW - Continuous disk winding

KW - High voltage HTS transformer

UR - http://www.scopus.com/inward/record.url?scp=34548491618&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=34548491618&partnerID=8YFLogxK

U2 - 10.1016/j.physc.2007.03.485

DO - 10.1016/j.physc.2007.03.485

M3 - Article

AN - SCOPUS:34548491618

VL - 463-465

SP - 1229

EP - 1232

JO - Physica C: Superconductivity and its Applications

JF - Physica C: Superconductivity and its Applications

SN - 0921-4534

IS - SUPPL.

ER -