Dielectric properties of human phantom material using XLPE composite with shape memory characteristics

Kyoung Sik Moon, Hyung Do Choi, Ho Yong Jung, Kwang Yoon Cho, Ho Gyu Yoon, Tak Jin Moon

Research output: Contribution to journalArticle

7 Citations (Scopus)

Abstract

Dielectric properties and shape memory characteristics of carbon black/dielectrics/crosslinked polyethylene (XLPE) composite for human phantom materials were investigated. The complex dielectric constants of only carbon black filled XLPE composite were increased with the content of carbon black and showed the frequency dependence decreased with increasing frequency. The carbon black/dielectrics/XLPE composite showed the complex dielectric constant increasing with the amount of dielectrics at the constant concentration of carbon black. The decrease of dielectric constant with the frequency was also occurred by the effect of carbon black. The dielectric constant and conductivity required for the phantom material such as skull and brain at 600 MHz∼2 GHz could be obtained by adjusting the composition ratio of dielectric powder and carbon black. The XLPE composites simulating the skull and brain showed the good shape recoverability even though the relative increase of the residual strain was found in the thermomechanical cycling test by the addition of fillers. The solution to minimize the effect of air gap between a specific absorption rate measurement-access probe and a probe hole on the phantom model would be proposed in this study.

Original languageEnglish
Pages (from-to)763-772
Number of pages10
JournalPolymer (Korea)
Volume23
Issue number5
Publication statusPublished - 1999 Dec 1

Fingerprint

Soot
Carbon black
Shape memory effect
Dielectric properties
Composite materials
Permittivity
Brain
Polyethylene
Powders
Polyethylenes
Fillers
Air
Chemical analysis

Keywords

  • Carbon black/dielectrics/XLPE composite
  • Complex dielectric constant
  • Phantom model
  • Shape memory
  • Thermomechanical cycling test

ASJC Scopus subject areas

  • Polymers and Plastics
  • Materials Chemistry

Cite this

Moon, K. S., Choi, H. D., Jung, H. Y., Cho, K. Y., Yoon, H. G., & Moon, T. J. (1999). Dielectric properties of human phantom material using XLPE composite with shape memory characteristics. Polymer (Korea), 23(5), 763-772.

Dielectric properties of human phantom material using XLPE composite with shape memory characteristics. / Moon, Kyoung Sik; Choi, Hyung Do; Jung, Ho Yong; Cho, Kwang Yoon; Yoon, Ho Gyu; Moon, Tak Jin.

In: Polymer (Korea), Vol. 23, No. 5, 01.12.1999, p. 763-772.

Research output: Contribution to journalArticle

Moon, KS, Choi, HD, Jung, HY, Cho, KY, Yoon, HG & Moon, TJ 1999, 'Dielectric properties of human phantom material using XLPE composite with shape memory characteristics', Polymer (Korea), vol. 23, no. 5, pp. 763-772.
Moon, Kyoung Sik ; Choi, Hyung Do ; Jung, Ho Yong ; Cho, Kwang Yoon ; Yoon, Ho Gyu ; Moon, Tak Jin. / Dielectric properties of human phantom material using XLPE composite with shape memory characteristics. In: Polymer (Korea). 1999 ; Vol. 23, No. 5. pp. 763-772.
@article{9008103b822c47549be858e4a4cf493b,
title = "Dielectric properties of human phantom material using XLPE composite with shape memory characteristics",
abstract = "Dielectric properties and shape memory characteristics of carbon black/dielectrics/crosslinked polyethylene (XLPE) composite for human phantom materials were investigated. The complex dielectric constants of only carbon black filled XLPE composite were increased with the content of carbon black and showed the frequency dependence decreased with increasing frequency. The carbon black/dielectrics/XLPE composite showed the complex dielectric constant increasing with the amount of dielectrics at the constant concentration of carbon black. The decrease of dielectric constant with the frequency was also occurred by the effect of carbon black. The dielectric constant and conductivity required for the phantom material such as skull and brain at 600 MHz∼2 GHz could be obtained by adjusting the composition ratio of dielectric powder and carbon black. The XLPE composites simulating the skull and brain showed the good shape recoverability even though the relative increase of the residual strain was found in the thermomechanical cycling test by the addition of fillers. The solution to minimize the effect of air gap between a specific absorption rate measurement-access probe and a probe hole on the phantom model would be proposed in this study.",
keywords = "Carbon black/dielectrics/XLPE composite, Complex dielectric constant, Phantom model, Shape memory, Thermomechanical cycling test",
author = "Moon, {Kyoung Sik} and Choi, {Hyung Do} and Jung, {Ho Yong} and Cho, {Kwang Yoon} and Yoon, {Ho Gyu} and Moon, {Tak Jin}",
year = "1999",
month = "12",
day = "1",
language = "English",
volume = "23",
pages = "763--772",
journal = "Polymer (Korea)",
issn = "0379-153X",
publisher = "Polymer Society of Korea",
number = "5",

}

TY - JOUR

T1 - Dielectric properties of human phantom material using XLPE composite with shape memory characteristics

AU - Moon, Kyoung Sik

AU - Choi, Hyung Do

AU - Jung, Ho Yong

AU - Cho, Kwang Yoon

AU - Yoon, Ho Gyu

AU - Moon, Tak Jin

PY - 1999/12/1

Y1 - 1999/12/1

N2 - Dielectric properties and shape memory characteristics of carbon black/dielectrics/crosslinked polyethylene (XLPE) composite for human phantom materials were investigated. The complex dielectric constants of only carbon black filled XLPE composite were increased with the content of carbon black and showed the frequency dependence decreased with increasing frequency. The carbon black/dielectrics/XLPE composite showed the complex dielectric constant increasing with the amount of dielectrics at the constant concentration of carbon black. The decrease of dielectric constant with the frequency was also occurred by the effect of carbon black. The dielectric constant and conductivity required for the phantom material such as skull and brain at 600 MHz∼2 GHz could be obtained by adjusting the composition ratio of dielectric powder and carbon black. The XLPE composites simulating the skull and brain showed the good shape recoverability even though the relative increase of the residual strain was found in the thermomechanical cycling test by the addition of fillers. The solution to minimize the effect of air gap between a specific absorption rate measurement-access probe and a probe hole on the phantom model would be proposed in this study.

AB - Dielectric properties and shape memory characteristics of carbon black/dielectrics/crosslinked polyethylene (XLPE) composite for human phantom materials were investigated. The complex dielectric constants of only carbon black filled XLPE composite were increased with the content of carbon black and showed the frequency dependence decreased with increasing frequency. The carbon black/dielectrics/XLPE composite showed the complex dielectric constant increasing with the amount of dielectrics at the constant concentration of carbon black. The decrease of dielectric constant with the frequency was also occurred by the effect of carbon black. The dielectric constant and conductivity required for the phantom material such as skull and brain at 600 MHz∼2 GHz could be obtained by adjusting the composition ratio of dielectric powder and carbon black. The XLPE composites simulating the skull and brain showed the good shape recoverability even though the relative increase of the residual strain was found in the thermomechanical cycling test by the addition of fillers. The solution to minimize the effect of air gap between a specific absorption rate measurement-access probe and a probe hole on the phantom model would be proposed in this study.

KW - Carbon black/dielectrics/XLPE composite

KW - Complex dielectric constant

KW - Phantom model

KW - Shape memory

KW - Thermomechanical cycling test

UR - http://www.scopus.com/inward/record.url?scp=22444452561&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=22444452561&partnerID=8YFLogxK

M3 - Article

AN - SCOPUS:22444452561

VL - 23

SP - 763

EP - 772

JO - Polymer (Korea)

JF - Polymer (Korea)

SN - 0379-153X

IS - 5

ER -