Directionality of sound radiation from rectangular panels

Pattabhi R. Budarapu, T. S S Narayana, B. Rammohan, Timon Rabczuk

Research output: Contribution to journalArticle

21 Citations (Scopus)

Abstract

In this paper, the directionality of sound radiated from a rectangular panel, attached with masses/springs, set in a baffle, is studied. The attachment of masses/springs is done based on the receptance method. The receptance method is used to generate new mode shapes and natural frequencies of the coupled system, in terms of the old mode shapes and natural frequencies. The Rayleigh integral is then used to compute the sound field. The point mass/spring locations are arbitrary, but chosen with the objective of attaining a unique directionality. The excitation frequency to a large degree decides the sound field variations. However, the size of the masses and the locations of the masses/springs do influence the new mode shapes and hence the sound field. The problem is more complex when the number of masses/springs are increased and/or their values are made different. The technique of receptance method is demonstrated through a steel plate with attached point masses in the first example. In the second and third examples, the present method is applied to estimate the sound field from a composite panel with attached springs and masses, respectively. The layup sequence of the composite panel considered in the examples corresponds to the multifunctional structure battery material system, used in the micro air vehicle (MAV) (Thomas and Qidwai, 2005). The demonstrated receptance method does give a reasonable estimate of the new modes.

Original languageEnglish
Pages (from-to)128-140
Number of pages13
JournalApplied Acoustics
Volume89
DOIs
Publication statusPublished - 2015 Jan 1

Fingerprint

rectangular panels
acoustics
radiation
sound fields
modal response
resonant frequencies
baffles
composite materials
estimates
attachment
electric batteries
vehicles
steels

ASJC Scopus subject areas

  • Acoustics and Ultrasonics

Cite this

Budarapu, P. R., Narayana, T. S. S., Rammohan, B., & Rabczuk, T. (2015). Directionality of sound radiation from rectangular panels. Applied Acoustics, 89, 128-140. https://doi.org/10.1016/j.apacoust.2014.09.006

Directionality of sound radiation from rectangular panels. / Budarapu, Pattabhi R.; Narayana, T. S S; Rammohan, B.; Rabczuk, Timon.

In: Applied Acoustics, Vol. 89, 01.01.2015, p. 128-140.

Research output: Contribution to journalArticle

Budarapu, PR, Narayana, TSS, Rammohan, B & Rabczuk, T 2015, 'Directionality of sound radiation from rectangular panels', Applied Acoustics, vol. 89, pp. 128-140. https://doi.org/10.1016/j.apacoust.2014.09.006
Budarapu, Pattabhi R. ; Narayana, T. S S ; Rammohan, B. ; Rabczuk, Timon. / Directionality of sound radiation from rectangular panels. In: Applied Acoustics. 2015 ; Vol. 89. pp. 128-140.
@article{cca67b32c09f4bae8ce8b4fdfb25dcbb,
title = "Directionality of sound radiation from rectangular panels",
abstract = "In this paper, the directionality of sound radiated from a rectangular panel, attached with masses/springs, set in a baffle, is studied. The attachment of masses/springs is done based on the receptance method. The receptance method is used to generate new mode shapes and natural frequencies of the coupled system, in terms of the old mode shapes and natural frequencies. The Rayleigh integral is then used to compute the sound field. The point mass/spring locations are arbitrary, but chosen with the objective of attaining a unique directionality. The excitation frequency to a large degree decides the sound field variations. However, the size of the masses and the locations of the masses/springs do influence the new mode shapes and hence the sound field. The problem is more complex when the number of masses/springs are increased and/or their values are made different. The technique of receptance method is demonstrated through a steel plate with attached point masses in the first example. In the second and third examples, the present method is applied to estimate the sound field from a composite panel with attached springs and masses, respectively. The layup sequence of the composite panel considered in the examples corresponds to the multifunctional structure battery material system, used in the micro air vehicle (MAV) (Thomas and Qidwai, 2005). The demonstrated receptance method does give a reasonable estimate of the new modes.",
keywords = "Acoustic radiation, Directivity, Receptance",
author = "Budarapu, {Pattabhi R.} and Narayana, {T. S S} and B. Rammohan and Timon Rabczuk",
year = "2015",
month = "1",
day = "1",
doi = "10.1016/j.apacoust.2014.09.006",
language = "English",
volume = "89",
pages = "128--140",
journal = "Applied Acoustics",
issn = "0003-682X",
publisher = "Elsevier Limited",

}

TY - JOUR

T1 - Directionality of sound radiation from rectangular panels

AU - Budarapu, Pattabhi R.

AU - Narayana, T. S S

AU - Rammohan, B.

AU - Rabczuk, Timon

PY - 2015/1/1

Y1 - 2015/1/1

N2 - In this paper, the directionality of sound radiated from a rectangular panel, attached with masses/springs, set in a baffle, is studied. The attachment of masses/springs is done based on the receptance method. The receptance method is used to generate new mode shapes and natural frequencies of the coupled system, in terms of the old mode shapes and natural frequencies. The Rayleigh integral is then used to compute the sound field. The point mass/spring locations are arbitrary, but chosen with the objective of attaining a unique directionality. The excitation frequency to a large degree decides the sound field variations. However, the size of the masses and the locations of the masses/springs do influence the new mode shapes and hence the sound field. The problem is more complex when the number of masses/springs are increased and/or their values are made different. The technique of receptance method is demonstrated through a steel plate with attached point masses in the first example. In the second and third examples, the present method is applied to estimate the sound field from a composite panel with attached springs and masses, respectively. The layup sequence of the composite panel considered in the examples corresponds to the multifunctional structure battery material system, used in the micro air vehicle (MAV) (Thomas and Qidwai, 2005). The demonstrated receptance method does give a reasonable estimate of the new modes.

AB - In this paper, the directionality of sound radiated from a rectangular panel, attached with masses/springs, set in a baffle, is studied. The attachment of masses/springs is done based on the receptance method. The receptance method is used to generate new mode shapes and natural frequencies of the coupled system, in terms of the old mode shapes and natural frequencies. The Rayleigh integral is then used to compute the sound field. The point mass/spring locations are arbitrary, but chosen with the objective of attaining a unique directionality. The excitation frequency to a large degree decides the sound field variations. However, the size of the masses and the locations of the masses/springs do influence the new mode shapes and hence the sound field. The problem is more complex when the number of masses/springs are increased and/or their values are made different. The technique of receptance method is demonstrated through a steel plate with attached point masses in the first example. In the second and third examples, the present method is applied to estimate the sound field from a composite panel with attached springs and masses, respectively. The layup sequence of the composite panel considered in the examples corresponds to the multifunctional structure battery material system, used in the micro air vehicle (MAV) (Thomas and Qidwai, 2005). The demonstrated receptance method does give a reasonable estimate of the new modes.

KW - Acoustic radiation

KW - Directivity

KW - Receptance

UR - http://www.scopus.com/inward/record.url?scp=84908190471&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84908190471&partnerID=8YFLogxK

U2 - 10.1016/j.apacoust.2014.09.006

DO - 10.1016/j.apacoust.2014.09.006

M3 - Article

AN - SCOPUS:84908190471

VL - 89

SP - 128

EP - 140

JO - Applied Acoustics

JF - Applied Acoustics

SN - 0003-682X

ER -