Ductile tearing simulation of STS410 pipe fracture test under load-controlled large-amplitude cyclic loading: Part II – effect of load amplitude and sequence

Jin Ha Hwang; Gyo Geun Youn; Hune Tae Kim; Yun Jae Kim; Naoki Miura

doi:10.1016/j.engfracmech.2020.107363

Ductile tearing simulation of STS410 pipe fracture test under load-controlled large-amplitude cyclic loading: Part II – effect of load amplitude and sequence

Jin Ha Hwang, Gyo Geun Youn, Hune Tae Kim, Yun Jae Kim, Naoki Miura

School of Mechanical Engineering

Research output: Contribution to journal › Article › peer-review

5 Citations (Scopus)

Abstract

As a companion paper of Part I, this paper presents ductile tearing simulation results of STS410 through-wall cracked pipe test data with different amplitudes of load-controlled fully-reversed cyclic loading. The multiaxial fracture strain energy damage model is used with the Chaboche model. The simulated crack growths are not dependent on the ratcheting term in the Chaboche model, but deformations are slightly sensitive. Simulation results suggest that acceleration and retardation behavior in crack growth rates due to the load sequence may not occur under large-amplitude cyclic loading.

Original language	English
Article number	107363
Journal	Engineering Fracture Mechanics
Volume	240
DOIs	https://doi.org/10.1016/j.engfracmech.2020.107363
Publication status	Published - 2020 Dec

Keywords

Ductile tearing simulation
Experimental validation
Large-amplitude cyclic loading
Load sequence effect
Through-wall cracked pipe

ASJC Scopus subject areas

Materials Science(all)
Mechanics of Materials
Mechanical Engineering

Access to Document

10.1016/j.engfracmech.2020.107363

Cite this

@article{5be92a7b6f33407f8a6b95bf8467a320,

title = "Ductile tearing simulation of STS410 pipe fracture test under load-controlled large-amplitude cyclic loading: Part II – effect of load amplitude and sequence",

abstract = "As a companion paper of Part I, this paper presents ductile tearing simulation results of STS410 through-wall cracked pipe test data with different amplitudes of load-controlled fully-reversed cyclic loading. The multiaxial fracture strain energy damage model is used with the Chaboche model. The simulated crack growths are not dependent on the ratcheting term in the Chaboche model, but deformations are slightly sensitive. Simulation results suggest that acceleration and retardation behavior in crack growth rates due to the load sequence may not occur under large-amplitude cyclic loading.",

keywords = "Ductile tearing simulation, Experimental validation, Large-amplitude cyclic loading, Load sequence effect, Through-wall cracked pipe",

author = "Hwang, {Jin Ha} and Youn, {Gyo Geun} and Kim, {Hune Tae} and Kim, {Yun Jae} and Naoki Miura",

note = "Funding Information: This research was supported by National Research Foundation (NRF) funded by Ministry of Science and ICT(NRF-2018M2A8A4084016).",

year = "2020",

month = dec,

doi = "10.1016/j.engfracmech.2020.107363",

language = "English",

volume = "240",

journal = "Engineering Fracture Mechanics",

issn = "0013-7944",

publisher = "Elsevier BV",

}

TY - JOUR

T1 - Ductile tearing simulation of STS410 pipe fracture test under load-controlled large-amplitude cyclic loading

T2 - Part II – effect of load amplitude and sequence

AU - Hwang, Jin Ha

AU - Youn, Gyo Geun

AU - Kim, Hune Tae

AU - Kim, Yun Jae

AU - Miura, Naoki

N1 - Funding Information: This research was supported by National Research Foundation (NRF) funded by Ministry of Science and ICT(NRF-2018M2A8A4084016).

PY - 2020/12

Y1 - 2020/12

N2 - As a companion paper of Part I, this paper presents ductile tearing simulation results of STS410 through-wall cracked pipe test data with different amplitudes of load-controlled fully-reversed cyclic loading. The multiaxial fracture strain energy damage model is used with the Chaboche model. The simulated crack growths are not dependent on the ratcheting term in the Chaboche model, but deformations are slightly sensitive. Simulation results suggest that acceleration and retardation behavior in crack growth rates due to the load sequence may not occur under large-amplitude cyclic loading.

AB - As a companion paper of Part I, this paper presents ductile tearing simulation results of STS410 through-wall cracked pipe test data with different amplitudes of load-controlled fully-reversed cyclic loading. The multiaxial fracture strain energy damage model is used with the Chaboche model. The simulated crack growths are not dependent on the ratcheting term in the Chaboche model, but deformations are slightly sensitive. Simulation results suggest that acceleration and retardation behavior in crack growth rates due to the load sequence may not occur under large-amplitude cyclic loading.

KW - Ductile tearing simulation

KW - Experimental validation

KW - Large-amplitude cyclic loading

KW - Load sequence effect

KW - Through-wall cracked pipe

UR - http://www.scopus.com/inward/record.url?scp=85092740500&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85092740500&partnerID=8YFLogxK

U2 - 10.1016/j.engfracmech.2020.107363

DO - 10.1016/j.engfracmech.2020.107363

M3 - Article

AN - SCOPUS:85092740500

SN - 0013-7944

VL - 240

JO - Engineering Fracture Mechanics

JF - Engineering Fracture Mechanics

M1 - 107363

ER -

Ductile tearing simulation of STS410 pipe fracture test under load-controlled large-amplitude cyclic loading: Part II – effect of load amplitude and sequence

Abstract

Keywords

ASJC Scopus subject areas

Access to Document

Other files and links

Fingerprint

Cite this