Effect of contact angle hysteresis on electrowetting threshold for droplet transport

Jong Hyeon Chang, James Jungho Pak

Research output: Contribution to journalArticle

8 Citations (Scopus)

Abstract

This paper describes the effect of the contact angle hysteresis caused by the adhesion between the liquid droplet and the solid surface on the threshold voltage for droplet transport in three different ground-type electrowetting configurations. It was found that the threshold voltage equals the hysteresis voltages in both single-plate and twin-plate configurations and the square root of 2 times the hysteresis voltage in the two-plate configuration by analyzing the contact angles at electrowetting threshold theoretically. The fabricated devices using 2.5 um thick polyimide ( r = 3.3) as the dielectric layer and thin Teflon AF as the hydrophobic layer ( 0 = 116 and = 4-6) showed the threshold voltages for droplet transport initiation of 28, 40 and 28 V in the single-plate, two-plate and twin-plate devices, respectively, and the threshold voltages for stable droplet transport of 35, 50 and 35 V, respectively. All the results are in very good agreement with theoretical values.

Original languageEnglish
Pages (from-to)2105-2111
Number of pages7
JournalJournal of Adhesion Science and Technology
Volume26
Issue number12-17
DOIs
Publication statusPublished - 2012 Sep 1

Keywords

  • adhesive friction
  • contact angle hysteresis
  • Digital microfluidics
  • droplet transport
  • electrowetting
  • threshold voltage

ASJC Scopus subject areas

  • Mechanics of Materials
  • Surfaces, Coatings and Films
  • Materials Chemistry
  • Chemistry(all)
  • Surfaces and Interfaces

Fingerprint Dive into the research topics of 'Effect of contact angle hysteresis on electrowetting threshold for droplet transport'. Together they form a unique fingerprint.

  • Cite this