Effect of metal oxide coating on the surface of LiCoO2 for the cathode of lithium secondary battery

Seungsuk Oh, Joong Kee Lee, Dongjin Byun, Byung Won Cho

Research output: Contribution to conferencePaper

Abstract

Preparation of metal oxides coating on the surface of LiCoO2 particles were carried out by a gas suspension spray method and examined for their electrochemical performance for the cathode materials of lithium secondary batteries. Employed coating materials in this study were Al2O 3, ZrO2 and TiO2. Metal oxide coating increased surface area and gave the better cycle performance and higher thermal stability than uncoated LiCoO2. This is probably due to the formation of Li-M-Co-O layers, which prevent the Co dissolution from the LiCoO2 structure. The highest capacity retention was observed for the ZrO2 coated LiCoO2 in our experimental range.

Original languageEnglish
Pages81-88
Number of pages8
Publication statusPublished - 2004
Event205th Electrochemical Society Fall Meeting - Orlando, FL, United States
Duration: 2003 Oct 122003 Oct 16

Other

Other205th Electrochemical Society Fall Meeting
CountryUnited States
CityOrlando, FL
Period03/10/1203/10/16

ASJC Scopus subject areas

  • Engineering(all)

Fingerprint Dive into the research topics of 'Effect of metal oxide coating on the surface of LiCoO<sub>2</sub> for the cathode of lithium secondary battery'. Together they form a unique fingerprint.

  • Cite this

    Oh, S., Lee, J. K., Byun, D., & Cho, B. W. (2004). Effect of metal oxide coating on the surface of LiCoO2 for the cathode of lithium secondary battery. 81-88. Paper presented at 205th Electrochemical Society Fall Meeting, Orlando, FL, United States.