Effect of preparation temperature on the characteristics of PbO-B2O3-SiO2 glass powders with spherical shape

Hye Young Koo, Seung Kwon Hong, Seo Hee Ju, Do Youp Kim, Yun Chan Kang

Research output: Contribution to journalArticle

19 Citations (Scopus)

Abstract

PbO-B2O3-SiO2 powders were prepared using spray pyrolysis at different preparation temperatures. The characteristics of these glass powders were strongly affected by the preparation temperatures. The powders prepared at temperatures below 650 °C had non-spherical shapes, irregular morphologies, and aggregation between powders. One powder with a spherical shape and a dense morphology was obtained from one droplet at preparation temperatures between 700 and 1250 °C. Some of the powders evaporated at preparation temperatures above 1300 °C. The glass phase was formed during the spray pyrolysis even within a short residence time of the powders inside a hot wall reactor at a temperature of above 800 °C. Dielectric layers with clean surfaces and dense structures were achieved from the powders obtained at preparation temperatures above 600 °C. The dielectric layers formed from the powders prepared using spray pyrolysis at preparation temperatures above 600 °C had high similar transparencies regardless of their preparation temperatures.

Original languageEnglish
Pages (from-to)344-349
Number of pages6
JournalJournal of Alloys and Compounds
Volume428
Issue number1-2
DOIs
Publication statusPublished - 2007 Jan 31
Externally publishedYes

Fingerprint

Powders
Glass
Spray pyrolysis
Temperature
boron oxide
Transparency
Agglomeration

Keywords

  • Amorphous materials
  • Chemical synthesis
  • Gas-solid reaction

ASJC Scopus subject areas

  • Mechanics of Materials
  • Mechanical Engineering
  • Metals and Alloys
  • Materials Chemistry

Cite this

Effect of preparation temperature on the characteristics of PbO-B2O3-SiO2 glass powders with spherical shape. / Koo, Hye Young; Hong, Seung Kwon; Ju, Seo Hee; Kim, Do Youp; Kang, Yun Chan.

In: Journal of Alloys and Compounds, Vol. 428, No. 1-2, 31.01.2007, p. 344-349.

Research output: Contribution to journalArticle

Koo, Hye Young ; Hong, Seung Kwon ; Ju, Seo Hee ; Kim, Do Youp ; Kang, Yun Chan. / Effect of preparation temperature on the characteristics of PbO-B2O3-SiO2 glass powders with spherical shape. In: Journal of Alloys and Compounds. 2007 ; Vol. 428, No. 1-2. pp. 344-349.
@article{4bc618ca5b4f4d5391cdd95b7c0b74b5,
title = "Effect of preparation temperature on the characteristics of PbO-B2O3-SiO2 glass powders with spherical shape",
abstract = "PbO-B2O3-SiO2 powders were prepared using spray pyrolysis at different preparation temperatures. The characteristics of these glass powders were strongly affected by the preparation temperatures. The powders prepared at temperatures below 650 °C had non-spherical shapes, irregular morphologies, and aggregation between powders. One powder with a spherical shape and a dense morphology was obtained from one droplet at preparation temperatures between 700 and 1250 °C. Some of the powders evaporated at preparation temperatures above 1300 °C. The glass phase was formed during the spray pyrolysis even within a short residence time of the powders inside a hot wall reactor at a temperature of above 800 °C. Dielectric layers with clean surfaces and dense structures were achieved from the powders obtained at preparation temperatures above 600 °C. The dielectric layers formed from the powders prepared using spray pyrolysis at preparation temperatures above 600 °C had high similar transparencies regardless of their preparation temperatures.",
keywords = "Amorphous materials, Chemical synthesis, Gas-solid reaction",
author = "Koo, {Hye Young} and Hong, {Seung Kwon} and Ju, {Seo Hee} and Kim, {Do Youp} and Kang, {Yun Chan}",
year = "2007",
month = "1",
day = "31",
doi = "10.1016/j.jallcom.2006.03.059",
language = "English",
volume = "428",
pages = "344--349",
journal = "Journal of Alloys and Compounds",
issn = "0925-8388",
publisher = "Elsevier BV",
number = "1-2",

}

TY - JOUR

T1 - Effect of preparation temperature on the characteristics of PbO-B2O3-SiO2 glass powders with spherical shape

AU - Koo, Hye Young

AU - Hong, Seung Kwon

AU - Ju, Seo Hee

AU - Kim, Do Youp

AU - Kang, Yun Chan

PY - 2007/1/31

Y1 - 2007/1/31

N2 - PbO-B2O3-SiO2 powders were prepared using spray pyrolysis at different preparation temperatures. The characteristics of these glass powders were strongly affected by the preparation temperatures. The powders prepared at temperatures below 650 °C had non-spherical shapes, irregular morphologies, and aggregation between powders. One powder with a spherical shape and a dense morphology was obtained from one droplet at preparation temperatures between 700 and 1250 °C. Some of the powders evaporated at preparation temperatures above 1300 °C. The glass phase was formed during the spray pyrolysis even within a short residence time of the powders inside a hot wall reactor at a temperature of above 800 °C. Dielectric layers with clean surfaces and dense structures were achieved from the powders obtained at preparation temperatures above 600 °C. The dielectric layers formed from the powders prepared using spray pyrolysis at preparation temperatures above 600 °C had high similar transparencies regardless of their preparation temperatures.

AB - PbO-B2O3-SiO2 powders were prepared using spray pyrolysis at different preparation temperatures. The characteristics of these glass powders were strongly affected by the preparation temperatures. The powders prepared at temperatures below 650 °C had non-spherical shapes, irregular morphologies, and aggregation between powders. One powder with a spherical shape and a dense morphology was obtained from one droplet at preparation temperatures between 700 and 1250 °C. Some of the powders evaporated at preparation temperatures above 1300 °C. The glass phase was formed during the spray pyrolysis even within a short residence time of the powders inside a hot wall reactor at a temperature of above 800 °C. Dielectric layers with clean surfaces and dense structures were achieved from the powders obtained at preparation temperatures above 600 °C. The dielectric layers formed from the powders prepared using spray pyrolysis at preparation temperatures above 600 °C had high similar transparencies regardless of their preparation temperatures.

KW - Amorphous materials

KW - Chemical synthesis

KW - Gas-solid reaction

UR - http://www.scopus.com/inward/record.url?scp=33845702749&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=33845702749&partnerID=8YFLogxK

U2 - 10.1016/j.jallcom.2006.03.059

DO - 10.1016/j.jallcom.2006.03.059

M3 - Article

VL - 428

SP - 344

EP - 349

JO - Journal of Alloys and Compounds

JF - Journal of Alloys and Compounds

SN - 0925-8388

IS - 1-2

ER -