Effect of roll gap geometry on the evolution of strain states and textures during asymmetrical rolling in AA 1050

M. Y. Huh, H. G. Kang, C. K. Kang

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Asymmetrical rolling was performed by rolling AA 1050 sheets with different velocities of upper and lower rolls. In order to study the effect of roll gap geometry on the evolution of strain states and textures during asymmetrical rolling, the reduction per rolling pass was varied. After asymmetrical rolling, the outer thickness layers depicted shear textures and the center thickness layers displayed a random texture. With decreasing reduction per an asymmetrical rolling pass, the thickness layers depicting shear textures increases. The strain states associated with asymmetrical rolling were investigated by simulations with the finite element method (FEM).

Original languageEnglish
Title of host publicationSemi-Solid Processing of Alloys and Composites - Proceedings of the 9th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2006
PublisherTrans Tech Publications Ltd
Pages417-420
Number of pages4
ISBN (Print)3908451264, 9783908451266
DOIs
Publication statusPublished - 2006
Event9th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2006 - Busan, Korea, Republic of
Duration: 2006 Sep 112006 Sep 13

Publication series

NameSolid State Phenomena
Volume116-117
ISSN (Print)1012-0394

Other

Other9th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2006
CountryKorea, Republic of
CityBusan
Period06/9/1106/9/13

Keywords

  • Asymmetrical rolling
  • Deformation texture
  • Finite element method
  • Rolling texture
  • Shear texture
  • Strain state

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics
  • Materials Science(all)
  • Condensed Matter Physics

Fingerprint Dive into the research topics of 'Effect of roll gap geometry on the evolution of strain states and textures during asymmetrical rolling in AA 1050'. Together they form a unique fingerprint.

  • Cite this

    Huh, M. Y., Kang, H. G., & Kang, C. K. (2006). Effect of roll gap geometry on the evolution of strain states and textures during asymmetrical rolling in AA 1050. In Semi-Solid Processing of Alloys and Composites - Proceedings of the 9th International Conference on Semi-Solid Processing of Alloys and Composites, S2P 2006 (pp. 417-420). (Solid State Phenomena; Vol. 116-117). Trans Tech Publications Ltd. https://doi.org/10.4028/3-908451-26-4.417