Effect of tensile properties on time-dependent C(t) and J(t) integrals in elastic-plastic-creep FE analysis

So Dam Lee, Han Sang Lee, Yun-Jae Kim, Robert A. Ainsworth, David W. Dean

Research output: Contribution to journalArticle

Abstract

This technical note presents the effect of elastic-plastic properties on calculated time-dependent C(t) and J(t) values. This is investigated via systematic elastic-plastic-creep finite element (FE) analysis. Three different stress-strain curves are used, having essentially the same plastic properties at large strains but different tensile data near the 0.2% proof (yield) strength. It is found that the plastic property in stress-strain curve affects the FE C(t) values only at short times (within approximately 20% of the redistribution time). The plastic property affects the initial J values at time t = 0 but not the rate of change of J(t) with time.

Original languageEnglish
Pages (from-to)171-178
Number of pages8
JournalInternational Journal of Pressure Vessels and Piping
Volume146
DOIs
Publication statusPublished - 2016 Oct 1

Fingerprint

Tensile properties
Creep
Plastics
Finite element method
Stress-strain curves
Yield stress

Keywords

  • C(t) integral
  • Elastic-plastic-creep
  • J(t) integral

ASJC Scopus subject areas

  • Materials Science(all)
  • Mechanics of Materials
  • Mechanical Engineering

Cite this

Effect of tensile properties on time-dependent C(t) and J(t) integrals in elastic-plastic-creep FE analysis. / Lee, So Dam; Lee, Han Sang; Kim, Yun-Jae; Ainsworth, Robert A.; Dean, David W.

In: International Journal of Pressure Vessels and Piping, Vol. 146, 01.10.2016, p. 171-178.

Research output: Contribution to journalArticle

@article{1f72735c95d8433ba80bbea6ea3a01f1,
title = "Effect of tensile properties on time-dependent C(t) and J(t) integrals in elastic-plastic-creep FE analysis",
abstract = "This technical note presents the effect of elastic-plastic properties on calculated time-dependent C(t) and J(t) values. This is investigated via systematic elastic-plastic-creep finite element (FE) analysis. Three different stress-strain curves are used, having essentially the same plastic properties at large strains but different tensile data near the 0.2{\%} proof (yield) strength. It is found that the plastic property in stress-strain curve affects the FE C(t) values only at short times (within approximately 20{\%} of the redistribution time). The plastic property affects the initial J values at time t = 0 but not the rate of change of J(t) with time.",
keywords = "C(t) integral, Elastic-plastic-creep, J(t) integral",
author = "Lee, {So Dam} and Lee, {Han Sang} and Yun-Jae Kim and Ainsworth, {Robert A.} and Dean, {David W.}",
year = "2016",
month = "10",
day = "1",
doi = "10.1016/j.ijpvp.2016.08.004",
language = "English",
volume = "146",
pages = "171--178",
journal = "International Journal of Pressure Vessels and Piping",
issn = "0308-0161",
publisher = "Elsevier BV",

}

TY - JOUR

T1 - Effect of tensile properties on time-dependent C(t) and J(t) integrals in elastic-plastic-creep FE analysis

AU - Lee, So Dam

AU - Lee, Han Sang

AU - Kim, Yun-Jae

AU - Ainsworth, Robert A.

AU - Dean, David W.

PY - 2016/10/1

Y1 - 2016/10/1

N2 - This technical note presents the effect of elastic-plastic properties on calculated time-dependent C(t) and J(t) values. This is investigated via systematic elastic-plastic-creep finite element (FE) analysis. Three different stress-strain curves are used, having essentially the same plastic properties at large strains but different tensile data near the 0.2% proof (yield) strength. It is found that the plastic property in stress-strain curve affects the FE C(t) values only at short times (within approximately 20% of the redistribution time). The plastic property affects the initial J values at time t = 0 but not the rate of change of J(t) with time.

AB - This technical note presents the effect of elastic-plastic properties on calculated time-dependent C(t) and J(t) values. This is investigated via systematic elastic-plastic-creep finite element (FE) analysis. Three different stress-strain curves are used, having essentially the same plastic properties at large strains but different tensile data near the 0.2% proof (yield) strength. It is found that the plastic property in stress-strain curve affects the FE C(t) values only at short times (within approximately 20% of the redistribution time). The plastic property affects the initial J values at time t = 0 but not the rate of change of J(t) with time.

KW - C(t) integral

KW - Elastic-plastic-creep

KW - J(t) integral

UR - http://www.scopus.com/inward/record.url?scp=84989816490&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84989816490&partnerID=8YFLogxK

U2 - 10.1016/j.ijpvp.2016.08.004

DO - 10.1016/j.ijpvp.2016.08.004

M3 - Article

VL - 146

SP - 171

EP - 178

JO - International Journal of Pressure Vessels and Piping

JF - International Journal of Pressure Vessels and Piping

SN - 0308-0161

ER -