Abstract
SiCp/2024 Al composites were prepared using various processing techniques, such as the spray forming, thixoforming, and compocasting. The interfacial characterizations of these composites were performed using scanning electron microscopy, Auger electron spectrometry, transmission electron microscopy, and X-ray diffraction on reaction products extracted by the electrochemical dissolution. The value of these combined techniques in elucidating the morphologies of the interfacial reaction products was also demonstrated. The influence that each fabrication process has on the extent of the interfacial reaction was studied.
| Original language | English |
|---|---|
| Pages (from-to) | 1155-1163 |
| Number of pages | 9 |
| Journal | Materials Research Bulletin |
| Volume | 32 |
| Issue number | 9 |
| Publication status | Published - 1997 Sep 1 |
| Externally published | Yes |
Fingerprint
Keywords
- A. carbides
- A. composites
- A. interfaces
- C. differential scanning calorimetry (DSC)
- C. X-ray diffraction
ASJC Scopus subject areas
- Ceramics and Composites
- Materials Chemistry
Cite this
Effect of the processing methods on the formation of Al4C3 in SiCp/2024 Al composites. / Shin, Don Soo; Lee, Jae-chul; Yoon, Eui Pak; Lee, Ho In.
In: Materials Research Bulletin, Vol. 32, No. 9, 01.09.1997, p. 1155-1163.Research output: Contribution to journal › Article
}
TY - JOUR
T1 - Effect of the processing methods on the formation of Al4C3 in SiCp/2024 Al composites
AU - Shin, Don Soo
AU - Lee, Jae-chul
AU - Yoon, Eui Pak
AU - Lee, Ho In
PY - 1997/9/1
Y1 - 1997/9/1
N2 - SiCp/2024 Al composites were prepared using various processing techniques, such as the spray forming, thixoforming, and compocasting. The interfacial characterizations of these composites were performed using scanning electron microscopy, Auger electron spectrometry, transmission electron microscopy, and X-ray diffraction on reaction products extracted by the electrochemical dissolution. The value of these combined techniques in elucidating the morphologies of the interfacial reaction products was also demonstrated. The influence that each fabrication process has on the extent of the interfacial reaction was studied.
AB - SiCp/2024 Al composites were prepared using various processing techniques, such as the spray forming, thixoforming, and compocasting. The interfacial characterizations of these composites were performed using scanning electron microscopy, Auger electron spectrometry, transmission electron microscopy, and X-ray diffraction on reaction products extracted by the electrochemical dissolution. The value of these combined techniques in elucidating the morphologies of the interfacial reaction products was also demonstrated. The influence that each fabrication process has on the extent of the interfacial reaction was studied.
KW - A. carbides
KW - A. composites
KW - A. interfaces
KW - C. differential scanning calorimetry (DSC)
KW - C. X-ray diffraction
UR - http://www.scopus.com/inward/record.url?scp=0031237924&partnerID=8YFLogxK
UR - http://www.scopus.com/inward/citedby.url?scp=0031237924&partnerID=8YFLogxK
M3 - Article
AN - SCOPUS:0031237924
VL - 32
SP - 1155
EP - 1163
JO - Materials Research Bulletin
JF - Materials Research Bulletin
SN - 0025-5408
IS - 9
ER -