Effect of winding tension on electrical behaviors of a no-insulation ReBCO pancake coil

Kwang Lok Kim, Seungyong Hahn, Youngjae Kim, Dong Gyu Yang, Jung Bin Song, Juan Bascuñán, Haigun Lee, Yukikazu Iwasa

Research output: Contribution to journalArticle

38 Citations (Scopus)

Abstract

This paper presents a study on the effects of winding tension on the characteristic resistance of a no-insulation (NI) coil. Two ReBCO NI test pancake coils, having the same winding i.d. (60 mm), o.d. (67.6 mm), and number of turns (60), were sequentially prepared in a way that the first test coil was wound with a winding tension of 12-N, tested, and then rewound with a new winding tension of 20-N for the same tests. In each test, the test coil was energized at a target current, the power supply was "suddenly" disconnected, and then the temporal decay of the coil center field was measured, from which the time constant of the test coil and the consequent characteristic resistance were obtained. To check the reproducibility of experimental data, each test was repeated four times and each time the test coil was unwound and rewound with a given winding tension. The experimental results were analyzed with equivalent circuit analyses. Correlation between the winding tension and the characteristic resistance was discussed in detail.

Original languageEnglish
Article number6613556
JournalIEEE Transactions on Applied Superconductivity
Volume24
Issue number3
DOIs
Publication statusPublished - 2014

Fingerprint

insulation
Insulation
coils
Equivalent circuits
equivalent circuits
power supplies
time constant
decay

Keywords

  • Characteristic resistance
  • No-insulation coil
  • ReBCO
  • Winding tension

ASJC Scopus subject areas

  • Electronic, Optical and Magnetic Materials
  • Condensed Matter Physics
  • Electrical and Electronic Engineering

Cite this

Kim, K. L., Hahn, S., Kim, Y., Yang, D. G., Song, J. B., Bascuñán, J., ... Iwasa, Y. (2014). Effect of winding tension on electrical behaviors of a no-insulation ReBCO pancake coil. IEEE Transactions on Applied Superconductivity, 24(3), [6613556]. https://doi.org/10.1109/TASC.2013.2283855

Effect of winding tension on electrical behaviors of a no-insulation ReBCO pancake coil. / Kim, Kwang Lok; Hahn, Seungyong; Kim, Youngjae; Yang, Dong Gyu; Song, Jung Bin; Bascuñán, Juan; Lee, Haigun; Iwasa, Yukikazu.

In: IEEE Transactions on Applied Superconductivity, Vol. 24, No. 3, 6613556, 2014.

Research output: Contribution to journalArticle

Kim, Kwang Lok ; Hahn, Seungyong ; Kim, Youngjae ; Yang, Dong Gyu ; Song, Jung Bin ; Bascuñán, Juan ; Lee, Haigun ; Iwasa, Yukikazu. / Effect of winding tension on electrical behaviors of a no-insulation ReBCO pancake coil. In: IEEE Transactions on Applied Superconductivity. 2014 ; Vol. 24, No. 3.
@article{a4f12d70f489427ab4fc3bf48f1cd710,
title = "Effect of winding tension on electrical behaviors of a no-insulation ReBCO pancake coil",
abstract = "This paper presents a study on the effects of winding tension on the characteristic resistance of a no-insulation (NI) coil. Two ReBCO NI test pancake coils, having the same winding i.d. (60 mm), o.d. (67.6 mm), and number of turns (60), were sequentially prepared in a way that the first test coil was wound with a winding tension of 12-N, tested, and then rewound with a new winding tension of 20-N for the same tests. In each test, the test coil was energized at a target current, the power supply was {"}suddenly{"} disconnected, and then the temporal decay of the coil center field was measured, from which the time constant of the test coil and the consequent characteristic resistance were obtained. To check the reproducibility of experimental data, each test was repeated four times and each time the test coil was unwound and rewound with a given winding tension. The experimental results were analyzed with equivalent circuit analyses. Correlation between the winding tension and the characteristic resistance was discussed in detail.",
keywords = "Characteristic resistance, No-insulation coil, ReBCO, Winding tension",
author = "Kim, {Kwang Lok} and Seungyong Hahn and Youngjae Kim and Yang, {Dong Gyu} and Song, {Jung Bin} and Juan Bascu{\~n}{\'a}n and Haigun Lee and Yukikazu Iwasa",
year = "2014",
doi = "10.1109/TASC.2013.2283855",
language = "English",
volume = "24",
journal = "IEEE Transactions on Applied Superconductivity",
issn = "1051-8223",
publisher = "Institute of Electrical and Electronics Engineers Inc.",
number = "3",

}

TY - JOUR

T1 - Effect of winding tension on electrical behaviors of a no-insulation ReBCO pancake coil

AU - Kim, Kwang Lok

AU - Hahn, Seungyong

AU - Kim, Youngjae

AU - Yang, Dong Gyu

AU - Song, Jung Bin

AU - Bascuñán, Juan

AU - Lee, Haigun

AU - Iwasa, Yukikazu

PY - 2014

Y1 - 2014

N2 - This paper presents a study on the effects of winding tension on the characteristic resistance of a no-insulation (NI) coil. Two ReBCO NI test pancake coils, having the same winding i.d. (60 mm), o.d. (67.6 mm), and number of turns (60), were sequentially prepared in a way that the first test coil was wound with a winding tension of 12-N, tested, and then rewound with a new winding tension of 20-N for the same tests. In each test, the test coil was energized at a target current, the power supply was "suddenly" disconnected, and then the temporal decay of the coil center field was measured, from which the time constant of the test coil and the consequent characteristic resistance were obtained. To check the reproducibility of experimental data, each test was repeated four times and each time the test coil was unwound and rewound with a given winding tension. The experimental results were analyzed with equivalent circuit analyses. Correlation between the winding tension and the characteristic resistance was discussed in detail.

AB - This paper presents a study on the effects of winding tension on the characteristic resistance of a no-insulation (NI) coil. Two ReBCO NI test pancake coils, having the same winding i.d. (60 mm), o.d. (67.6 mm), and number of turns (60), were sequentially prepared in a way that the first test coil was wound with a winding tension of 12-N, tested, and then rewound with a new winding tension of 20-N for the same tests. In each test, the test coil was energized at a target current, the power supply was "suddenly" disconnected, and then the temporal decay of the coil center field was measured, from which the time constant of the test coil and the consequent characteristic resistance were obtained. To check the reproducibility of experimental data, each test was repeated four times and each time the test coil was unwound and rewound with a given winding tension. The experimental results were analyzed with equivalent circuit analyses. Correlation between the winding tension and the characteristic resistance was discussed in detail.

KW - Characteristic resistance

KW - No-insulation coil

KW - ReBCO

KW - Winding tension

UR - http://www.scopus.com/inward/record.url?scp=84991503856&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84991503856&partnerID=8YFLogxK

U2 - 10.1109/TASC.2013.2283855

DO - 10.1109/TASC.2013.2283855

M3 - Article

VL - 24

JO - IEEE Transactions on Applied Superconductivity

JF - IEEE Transactions on Applied Superconductivity

SN - 1051-8223

IS - 3

M1 - 6613556

ER -