Effects of frozen water content and silt fraction on unconfined compressive behavior of fill materials

Sang Yeob Kim, Youngdae Kim, Jong Sub Lee

Research output: Contribution to journalArticlepeer-review

Abstract

Characteristics of ice constituent and soil particles primarily determine the mechanical properties of fill materials in extreme regions. The objective of this study is to investigate the unconfined compressive behavior of sand-silt mixed fill materials with various frozen water contents and silt fractions (SFs). Sand-silt mixtures at a relative density of 60% and degrees of saturation of 15% to 25% are prepared at SFs of 0% to 70% in weight. The volumetric water contents are measured at ±5 °C in a freezing mold, and uniaxial compression tests are conducted after freezing. Test results show that the volumetric frozen water content is proportional to the void ratio because these values decrease equivalently when SF < 30% and increase when SF > 30%. The unconfined compressive strength (UCS) and stress at maximum curvature point (MCP), except those of clean sand (SF = 0%), increase with the volumetric frozen water content and void ratio owing to ice-bonding and SF effects. The strength ratio (UCS/MCP) and visualized fracture mode present brittle-to-ductile transitional characteristics according to the SF. This study demonstrates that frozen water content, SF, and fracture mode should be considered when sand-silt mixed materials are used for filling in extreme regions.

Original languageEnglish
Article number120912
JournalConstruction and Building Materials
Volume266
DOIs
Publication statusPublished - 2021 Jan 10

Keywords

  • Fill materials
  • Fracture mode
  • Silt fraction
  • Unconfined compressive behavior
  • Volumetric frozen water content

ASJC Scopus subject areas

  • Civil and Structural Engineering
  • Building and Construction
  • Materials Science(all)

Fingerprint

Dive into the research topics of 'Effects of frozen water content and silt fraction on unconfined compressive behavior of fill materials'. Together they form a unique fingerprint.

Cite this