Effects of relining materials on the flexural strength of relined thermoplastic denture base resins

Yunhan Sun, So Yeon Song, Ki Sun Lee, Jin Hong Park, Jae Jun Ryu, Jeong Yol Lee

Research output: Contribution to journalArticle

1 Citation (Scopus)

Abstract

PURPOSE. The aim of this study was to evaluate the effects of relining materials on the flexural strength of relined thermoplastic denture base resins (TDBRs). MATERIALS AND METHODS. For shear bond strength testing, 120 specimens were fabricated using four TDBRs (EstheShot-Bright, Acrytone, Valplast, Weldenz) that were bonded with three autopolymerizing denture relining resins (ADRRs: Vertex Self-Curing, Tokuyama Rebase, Ufi Gel Hard) with a bond area of 6.0 mm in diameter and were assigned to each group (n=10). For flexural strength testing, 120 specimens measuring 64.0×10.0×3.3 mm (ISO-1567:1999) were fabricated using four TDBRs and three ADRRs and were assigned to each group (n=10). The thickness of the specimens measured 2.0 mm of TDBR and 1.3 mm of ADRR. Forty specimens using four TDBRs and 30 specimens using ADRRs served as the control. All specimens were tested on a universal testing machine. For statistical analysis, Analysis of variance (ANOVA) with Tukey's test as post hoc and Spearman's correlation coefficient analysis (P=.05) were performed. RESULTS. Acry-Tone showed the highest shear bond strength, while Weldenz demonstrated the lowest bond strength between TDBR and ADRRs compared to other groups. EstheShot-Bright exhibited the highest flexural strength, while Weldenz showed the lowest flexural strength. Relined EstheShot-Bright demonstrated the highest flexural strength and relined Weldenz exhibited the lowest flexural strength (P < .05). Flexural strength of TDBRs (P=.001) and shear bond strength (P=.013) exhibited a positive correlation with the flexural strength of relined TDBRs. CONCLUSION. The flexural strength of relined TDBRs was affected by the flexural strength of the original denture base resins and bond strength between denture base resins and relining materials.

Original languageEnglish
Pages (from-to)361-366
Number of pages6
JournalJournal of Advanced Prosthodontics
Volume10
Issue number5
DOIs
Publication statusPublished - 2018 Oct 1

Fingerprint

Denture Bases
Shear Strength
Denture Rebasing
Analysis of Variance

Keywords

  • Bond strength
  • Denture bases
  • Denture liners
  • Flexural strength
  • Thermoplastic resin

ASJC Scopus subject areas

  • Oral Surgery
  • Dentistry (miscellaneous)

Cite this

Effects of relining materials on the flexural strength of relined thermoplastic denture base resins. / Sun, Yunhan; Song, So Yeon; Lee, Ki Sun; Park, Jin Hong; Ryu, Jae Jun; Lee, Jeong Yol.

In: Journal of Advanced Prosthodontics, Vol. 10, No. 5, 01.10.2018, p. 361-366.

Research output: Contribution to journalArticle

Sun, Yunhan ; Song, So Yeon ; Lee, Ki Sun ; Park, Jin Hong ; Ryu, Jae Jun ; Lee, Jeong Yol. / Effects of relining materials on the flexural strength of relined thermoplastic denture base resins. In: Journal of Advanced Prosthodontics. 2018 ; Vol. 10, No. 5. pp. 361-366.
@article{a0055dd13d884a818a7f6c0cf93b7ff7,
title = "Effects of relining materials on the flexural strength of relined thermoplastic denture base resins",
abstract = "PURPOSE. The aim of this study was to evaluate the effects of relining materials on the flexural strength of relined thermoplastic denture base resins (TDBRs). MATERIALS AND METHODS. For shear bond strength testing, 120 specimens were fabricated using four TDBRs (EstheShot-Bright, Acrytone, Valplast, Weldenz) that were bonded with three autopolymerizing denture relining resins (ADRRs: Vertex Self-Curing, Tokuyama Rebase, Ufi Gel Hard) with a bond area of 6.0 mm in diameter and were assigned to each group (n=10). For flexural strength testing, 120 specimens measuring 64.0×10.0×3.3 mm (ISO-1567:1999) were fabricated using four TDBRs and three ADRRs and were assigned to each group (n=10). The thickness of the specimens measured 2.0 mm of TDBR and 1.3 mm of ADRR. Forty specimens using four TDBRs and 30 specimens using ADRRs served as the control. All specimens were tested on a universal testing machine. For statistical analysis, Analysis of variance (ANOVA) with Tukey's test as post hoc and Spearman's correlation coefficient analysis (P=.05) were performed. RESULTS. Acry-Tone showed the highest shear bond strength, while Weldenz demonstrated the lowest bond strength between TDBR and ADRRs compared to other groups. EstheShot-Bright exhibited the highest flexural strength, while Weldenz showed the lowest flexural strength. Relined EstheShot-Bright demonstrated the highest flexural strength and relined Weldenz exhibited the lowest flexural strength (P < .05). Flexural strength of TDBRs (P=.001) and shear bond strength (P=.013) exhibited a positive correlation with the flexural strength of relined TDBRs. CONCLUSION. The flexural strength of relined TDBRs was affected by the flexural strength of the original denture base resins and bond strength between denture base resins and relining materials.",
keywords = "Bond strength, Denture bases, Denture liners, Flexural strength, Thermoplastic resin",
author = "Yunhan Sun and Song, {So Yeon} and Lee, {Ki Sun} and Park, {Jin Hong} and Ryu, {Jae Jun} and Lee, {Jeong Yol}",
year = "2018",
month = "10",
day = "1",
doi = "10.4047/jap.2018.10.5.361",
language = "English",
volume = "10",
pages = "361--366",
journal = "Journal of Advanced Prosthodontics",
issn = "2005-7806",
publisher = "The Korean Academy of prosthodontics",
number = "5",

}

TY - JOUR

T1 - Effects of relining materials on the flexural strength of relined thermoplastic denture base resins

AU - Sun, Yunhan

AU - Song, So Yeon

AU - Lee, Ki Sun

AU - Park, Jin Hong

AU - Ryu, Jae Jun

AU - Lee, Jeong Yol

PY - 2018/10/1

Y1 - 2018/10/1

N2 - PURPOSE. The aim of this study was to evaluate the effects of relining materials on the flexural strength of relined thermoplastic denture base resins (TDBRs). MATERIALS AND METHODS. For shear bond strength testing, 120 specimens were fabricated using four TDBRs (EstheShot-Bright, Acrytone, Valplast, Weldenz) that were bonded with three autopolymerizing denture relining resins (ADRRs: Vertex Self-Curing, Tokuyama Rebase, Ufi Gel Hard) with a bond area of 6.0 mm in diameter and were assigned to each group (n=10). For flexural strength testing, 120 specimens measuring 64.0×10.0×3.3 mm (ISO-1567:1999) were fabricated using four TDBRs and three ADRRs and were assigned to each group (n=10). The thickness of the specimens measured 2.0 mm of TDBR and 1.3 mm of ADRR. Forty specimens using four TDBRs and 30 specimens using ADRRs served as the control. All specimens were tested on a universal testing machine. For statistical analysis, Analysis of variance (ANOVA) with Tukey's test as post hoc and Spearman's correlation coefficient analysis (P=.05) were performed. RESULTS. Acry-Tone showed the highest shear bond strength, while Weldenz demonstrated the lowest bond strength between TDBR and ADRRs compared to other groups. EstheShot-Bright exhibited the highest flexural strength, while Weldenz showed the lowest flexural strength. Relined EstheShot-Bright demonstrated the highest flexural strength and relined Weldenz exhibited the lowest flexural strength (P < .05). Flexural strength of TDBRs (P=.001) and shear bond strength (P=.013) exhibited a positive correlation with the flexural strength of relined TDBRs. CONCLUSION. The flexural strength of relined TDBRs was affected by the flexural strength of the original denture base resins and bond strength between denture base resins and relining materials.

AB - PURPOSE. The aim of this study was to evaluate the effects of relining materials on the flexural strength of relined thermoplastic denture base resins (TDBRs). MATERIALS AND METHODS. For shear bond strength testing, 120 specimens were fabricated using four TDBRs (EstheShot-Bright, Acrytone, Valplast, Weldenz) that were bonded with three autopolymerizing denture relining resins (ADRRs: Vertex Self-Curing, Tokuyama Rebase, Ufi Gel Hard) with a bond area of 6.0 mm in diameter and were assigned to each group (n=10). For flexural strength testing, 120 specimens measuring 64.0×10.0×3.3 mm (ISO-1567:1999) were fabricated using four TDBRs and three ADRRs and were assigned to each group (n=10). The thickness of the specimens measured 2.0 mm of TDBR and 1.3 mm of ADRR. Forty specimens using four TDBRs and 30 specimens using ADRRs served as the control. All specimens were tested on a universal testing machine. For statistical analysis, Analysis of variance (ANOVA) with Tukey's test as post hoc and Spearman's correlation coefficient analysis (P=.05) were performed. RESULTS. Acry-Tone showed the highest shear bond strength, while Weldenz demonstrated the lowest bond strength between TDBR and ADRRs compared to other groups. EstheShot-Bright exhibited the highest flexural strength, while Weldenz showed the lowest flexural strength. Relined EstheShot-Bright demonstrated the highest flexural strength and relined Weldenz exhibited the lowest flexural strength (P < .05). Flexural strength of TDBRs (P=.001) and shear bond strength (P=.013) exhibited a positive correlation with the flexural strength of relined TDBRs. CONCLUSION. The flexural strength of relined TDBRs was affected by the flexural strength of the original denture base resins and bond strength between denture base resins and relining materials.

KW - Bond strength

KW - Denture bases

KW - Denture liners

KW - Flexural strength

KW - Thermoplastic resin

UR - http://www.scopus.com/inward/record.url?scp=85056331253&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=85056331253&partnerID=8YFLogxK

U2 - 10.4047/jap.2018.10.5.361

DO - 10.4047/jap.2018.10.5.361

M3 - Article

AN - SCOPUS:85056331253

VL - 10

SP - 361

EP - 366

JO - Journal of Advanced Prosthodontics

JF - Journal of Advanced Prosthodontics

SN - 2005-7806

IS - 5

ER -