Energy harvester using PZT nanotubes fabricated by template-assisted method

Woo Suk Jung, Young Ho Do, Min Gyu Kang, Chong-Yun Kang

Research output: Contribution to journalArticle

18 Citations (Scopus)

Abstract

Lead zirconate titanate (PZT) nanotubes fabricated by template-assisted method using sol-gel solution infiltration are applied for energy harvester. To fabricate PZT nanotubes, an anodic aluminum oxide is used for the template, and as-prepared PZT solution dropped on the surface of the AAO is in filtrated by vacuum pump into the pores in the AAO. The template including PZT solution is dried at 80 °C for 1 min and dried again at 300 °C for 10 min, and then it treated at 650 °C for 30 min to anneal PZT and form the expected perovskite phase. The fabricated nanotubes were mixed with PDMS polymer composite and polyimide films coated Pt/Ti were used for electrodes. Finally, it demonstrated that the energy harvester could generate the output power of 37 nW/cm2.

Original languageEnglish
JournalCurrent Applied Physics
Volume13
Issue number4 SUPPL.2
DOIs
Publication statusPublished - 2013 Jul 20

    Fingerprint

Keywords

  • Anodic aluminum oxide
  • Nanostructure
  • PbZrTiO
  • Piezoelectric

ASJC Scopus subject areas

  • Materials Science(all)
  • Physics and Astronomy(all)

Cite this