Enhanced cooling of high-power microelectronics with swing-like pool boiling

Yong Il Kim, Keunhee Jang, Chanwoo Park, Seongpil An, Alexander L. Yarin, Sam S. Yoon

Research output: Contribution to journalArticlepeer-review

Abstract

A self-propelling swing-like heater was designed and studied under pool-boiling conditions with the aim of cooling high-power microelectronic devices/chips. The results unequivocally show that the swing motion improves the effectiveness with which the heater is cooled by a liquid coolant below the critical heat flux (CHF). The heat removal is enhanced because the vapor-bubble cloud is shed from the heater surface owing to the self-propelled motion of the heater, which could be employed not only under normal gravity on Earth, but also under microgravity conditions during space exploration, where the CHF restriction is more severe because of the absence of the buoyancy force responsible for removing vapor bubbles on Earth. In our work, the confinement is relatively small compared to the size of the swing-like heater, and the latter was mostly driven by the global circulation arising within the confinement owing to the formation of bubbles, rather than by the vapor recoil force observed in previous work in which relatively large confinements were employed.

Original languageEnglish
Article number105338
JournalInternational Communications in Heat and Mass Transfer
Volume125
DOIs
Publication statusPublished - 2021 Jun

Keywords

  • Pool boiling
  • Swing-like heater

ASJC Scopus subject areas

  • Atomic and Molecular Physics, and Optics
  • Chemical Engineering(all)
  • Condensed Matter Physics

Fingerprint

Dive into the research topics of 'Enhanced cooling of high-power microelectronics with swing-like pool boiling'. Together they form a unique fingerprint.

Cite this