Enhancement of nucleate boiling heat transfer with nanofiber mat

L. Yang, V. Patel, J. Seyed-Yagoobi, S. Jun, S. Sinha-Ray, Y. Zhang, Alexander Yarin

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Abstract

Nucleate pool boiling heat transfer has been experimentally studied at ambient temperature, on a surface with a novel nanofiber mat coating. The nano-textured surface was made of alumina ceramic substrate covered by an electrospun polymer nanofiber mat with a thickness of about 30 μm and immersed in saturated HCFC-123. The surfaces of the individual polymer nanofibers in the mat were copper-plated. Significant enhancements in nucleate boiling heat transfer as well as reduction of surface temperature have been achieved for the copper nanofiber-coated surface compared to a bare surface.

Original languageEnglish
Title of host publicationASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012
Pages365-373
Number of pages9
Volume2
DOIs
Publication statusPublished - 2012 Dec 1
Externally publishedYes
EventASME 2012 Heat Transfer Summer Conference Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012 - Rio Grande, Puerto Rico
Duration: 2012 Jul 82012 Jul 12

Other

OtherASME 2012 Heat Transfer Summer Conference Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012
CountryPuerto Rico
CityRio Grande
Period12/7/812/7/12

Fingerprint

nucleate boiling
Nucleate boiling
Nanofibers
heat transfer
Heat transfer
augmentation
Copper
Polymers
copper
polymers
Aluminum Oxide
boiling
surface temperature
ambient temperature
Boiling liquids
aluminum oxides
ceramics
Alumina
coatings
Coatings

ASJC Scopus subject areas

  • Fluid Flow and Transfer Processes
  • Control and Systems Engineering
  • Electrical and Electronic Engineering
  • Mechanical Engineering
  • Condensed Matter Physics

Cite this

Yang, L., Patel, V., Seyed-Yagoobi, J., Jun, S., Sinha-Ray, S., Zhang, Y., & Yarin, A. (2012). Enhancement of nucleate boiling heat transfer with nanofiber mat. In ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012 (Vol. 2, pp. 365-373) https://doi.org/10.1115/HT2012-58107

Enhancement of nucleate boiling heat transfer with nanofiber mat. / Yang, L.; Patel, V.; Seyed-Yagoobi, J.; Jun, S.; Sinha-Ray, S.; Zhang, Y.; Yarin, Alexander.

ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012. Vol. 2 2012. p. 365-373.

Research output: Chapter in Book/Report/Conference proceedingConference contribution

Yang, L, Patel, V, Seyed-Yagoobi, J, Jun, S, Sinha-Ray, S, Zhang, Y & Yarin, A 2012, Enhancement of nucleate boiling heat transfer with nanofiber mat. in ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012. vol. 2, pp. 365-373, ASME 2012 Heat Transfer Summer Conference Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012, Rio Grande, Puerto Rico, 12/7/8. https://doi.org/10.1115/HT2012-58107
Yang L, Patel V, Seyed-Yagoobi J, Jun S, Sinha-Ray S, Zhang Y et al. Enhancement of nucleate boiling heat transfer with nanofiber mat. In ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012. Vol. 2. 2012. p. 365-373 https://doi.org/10.1115/HT2012-58107
Yang, L. ; Patel, V. ; Seyed-Yagoobi, J. ; Jun, S. ; Sinha-Ray, S. ; Zhang, Y. ; Yarin, Alexander. / Enhancement of nucleate boiling heat transfer with nanofiber mat. ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012. Vol. 2 2012. pp. 365-373
@inproceedings{45d8a8c202074f83b0b24f5af57478d3,
title = "Enhancement of nucleate boiling heat transfer with nanofiber mat",
abstract = "Nucleate pool boiling heat transfer has been experimentally studied at ambient temperature, on a surface with a novel nanofiber mat coating. The nano-textured surface was made of alumina ceramic substrate covered by an electrospun polymer nanofiber mat with a thickness of about 30 μm and immersed in saturated HCFC-123. The surfaces of the individual polymer nanofibers in the mat were copper-plated. Significant enhancements in nucleate boiling heat transfer as well as reduction of surface temperature have been achieved for the copper nanofiber-coated surface compared to a bare surface.",
author = "L. Yang and V. Patel and J. Seyed-Yagoobi and S. Jun and S. Sinha-Ray and Y. Zhang and Alexander Yarin",
year = "2012",
month = "12",
day = "1",
doi = "10.1115/HT2012-58107",
language = "English",
isbn = "9780791844786",
volume = "2",
pages = "365--373",
booktitle = "ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012",

}

TY - GEN

T1 - Enhancement of nucleate boiling heat transfer with nanofiber mat

AU - Yang, L.

AU - Patel, V.

AU - Seyed-Yagoobi, J.

AU - Jun, S.

AU - Sinha-Ray, S.

AU - Zhang, Y.

AU - Yarin, Alexander

PY - 2012/12/1

Y1 - 2012/12/1

N2 - Nucleate pool boiling heat transfer has been experimentally studied at ambient temperature, on a surface with a novel nanofiber mat coating. The nano-textured surface was made of alumina ceramic substrate covered by an electrospun polymer nanofiber mat with a thickness of about 30 μm and immersed in saturated HCFC-123. The surfaces of the individual polymer nanofibers in the mat were copper-plated. Significant enhancements in nucleate boiling heat transfer as well as reduction of surface temperature have been achieved for the copper nanofiber-coated surface compared to a bare surface.

AB - Nucleate pool boiling heat transfer has been experimentally studied at ambient temperature, on a surface with a novel nanofiber mat coating. The nano-textured surface was made of alumina ceramic substrate covered by an electrospun polymer nanofiber mat with a thickness of about 30 μm and immersed in saturated HCFC-123. The surfaces of the individual polymer nanofibers in the mat were copper-plated. Significant enhancements in nucleate boiling heat transfer as well as reduction of surface temperature have been achieved for the copper nanofiber-coated surface compared to a bare surface.

UR - http://www.scopus.com/inward/record.url?scp=84892652486&partnerID=8YFLogxK

UR - http://www.scopus.com/inward/citedby.url?scp=84892652486&partnerID=8YFLogxK

U2 - 10.1115/HT2012-58107

DO - 10.1115/HT2012-58107

M3 - Conference contribution

SN - 9780791844786

VL - 2

SP - 365

EP - 373

BT - ASME 2012 Heat Transfer Summer Conf. Collocated with the ASME 2012 Fluids Engineering Div. Summer Meeting and the ASME 2012 10th Int. Conf. on Nanochannels, Microchannels and Minichannels, HT 2012

ER -